Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8a4934f1 authored by Bing Zhao's avatar Bing Zhao Committed by Gustavo Padovan
Browse files

Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy 



The device tree property can define the cal-data in proper order.
There is no need to swap the bytes in driver.
Also remove the redundant cal-data memory copy after removing the
byte swapping.

Cc: Mike Frysinger <vapier@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarHyuckjoo Lee <hyuckjoo.lee@samsung.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 433a9389

drivers/bluetooth/btmrvl_drv.h

+1 −1
Original line number Diff line number Diff line
@@ -120,7 +120,7 @@ struct btmrvl_private { 
#define PS_SLEEP			0x01

#define PS_AWAKE			0x00



#define BT_CMD_DATA_SIZE		32

#define BT_CAL_HDR_LEN			4

#define BT_CAL_DATA_SIZE		28



struct btmrvl_event {

drivers/bluetooth/btmrvl_main.c

+10 −17
Original line number Diff line number Diff line
@@ -415,28 +415,20 @@ static int btmrvl_open(struct hci_dev *hdev) 
}



static int btmrvl_download_cal_data(struct btmrvl_private *priv,

				    u8 *config_data)

				    u8 *data, int len)

{

	int i, ret;

	u8 data[BT_CMD_DATA_SIZE];

	int ret;



	data[0] = 0x00;

	data[1] = 0x00;

	data[2] = 0x00;

	data[3] = BT_CMD_DATA_SIZE - 4;



	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4

	 * byte SDIO header offset, mapping of input and output bytes will be

	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},

	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */

	for (i = 4; i < BT_CMD_DATA_SIZE; i++)

		data[i] = config_data[(i / 4) * 8 - 1 - i];

	data[3] = len;



	print_hex_dump_bytes("Calibration data: ",

			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);

			     DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);



	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,

				   BT_CMD_DATA_SIZE);

				   BT_CAL_HDR_LEN + len);

	if (ret)

		BT_ERR("Failed to download caibration data\n");
@@ -446,7 +438,7 @@ static int btmrvl_download_cal_data(struct btmrvl_private *priv, 
static int btmrvl_cal_data_dt(struct btmrvl_private *priv)

{

	struct device_node *dt_node;

	u8 cal_data[BT_CAL_DATA_SIZE];

	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];

	const char name[] = "btmrvl_caldata";

	const char property[] = "btmrvl,caldata";

	int ret;
@@ -455,13 +447,14 @@ static int btmrvl_cal_data_dt(struct btmrvl_private *priv) 
	if (!dt_node)

		return -ENODEV;



	ret = of_property_read_u8_array(dt_node, property, cal_data,

					sizeof(cal_data));

	ret = of_property_read_u8_array(dt_node, property,

					cal_data + BT_CAL_HDR_LEN,

					BT_CAL_DATA_SIZE);

	if (ret)

		return ret;



	BT_DBG("Use cal data from device tree");

	ret = btmrvl_download_cal_data(priv, cal_data);

	ret = btmrvl_download_cal_data(priv, cal_data, BT_CAL_DATA_SIZE);

	if (ret) {

		BT_ERR("Fail to download calibrate data");

		return ret;