Merge "ARM: dts: msm: Add wcnss node for msm8937" (88be89ea) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/msm8937-pinctrl.dtsi

+79 −0

Original line number	Diff line number	Diff line
		@@ -170,6 +170,85 @@
		};
		};

		wcnss_pmux_5wire {
		/* Active configuration of bus pins */
		wcnss_default: wcnss_default {
		wcss_wlan2 {
		pins = "gpio76";
		function = "wcss_wlan2";
		};
		wcss_wlan1 {
		pins = "gpio77";
		function = "wcss_wlan1";
		};
		wcss_wlan0 {
		pins = "gpio78";
		function = "wcss_wlan0";
		};
		wcss_wlan {
		pins = "gpio79", "gpio80";
		function = "wcss_wlan";
		};

		config {
		pins = "gpio76", "gpio77",
		"gpio78", "gpio79",
		"gpio80";
		drive-strength = <6>; /* 6 MA */
		bias-pull-up; /* PULL UP */
		};
		};

		wcnss_sleep: wcnss_sleep {
		wcss_wlan2 {
		pins = "gpio76";
		function = "wcss_wlan2";
		};
		wcss_wlan1 {
		pins = "gpio77";
		function = "wcss_wlan1";
		};
		wcss_wlan0 {
		pins = "gpio78";
		function = "wcss_wlan0";
		};
		wcss_wlan {
		pins = "gpio79", "gpio80";
		function = "wcss_wlan";
		};

		config {
		pins = "gpio76", "gpio77",
		"gpio78", "gpio79",
		"gpio80";
		drive-strength = <2>; /* 2 MA */
		bias-pull-down; /* PULL Down */
		};
		};
		};

		wcnss_pmux_gpio: wcnss_pmux_gpio {
		wcnss_gpio_default: wcnss_gpio_default {
		/* Active configuration of bus pins */
		mux {
		/* Uses general purpose pins */
		pins = "gpio76", "gpio77",
		"gpio78", "gpio79",
		"gpio80";
		function = "gpio";

		};

		config {
		pins = "gpio76", "gpio77",
		"gpio78", "gpio79",
		"gpio80";
		drive-strength = <6>; /* 6 MA */
		bias-pull-up; /* PULL UP */
		};
		};
		};

		blsp2_uart1_active: blsp2_uart1_active {
		mux {
		pins = "gpio16", "gpio17", "gpio18", "gpio19";

arch/arm/boot/dts/qcom/msm8937.dtsi

+81 −0

Original line number	Diff line number	Diff line
		@@ -641,6 +641,87 @@
		rpm-standalone; /* TODO: Remove once RPM communication is up */
		};

		qcom,wcnss-wlan@0a000000 {
		compatible = "qcom,wcnss_wlan";
		reg = <0x0a000000 0x280000>,
		<0xb011008 0x04>,
		<0x0a21b000 0x3000>,
		<0x03204000 0x00000100>,
		<0x03200800 0x00000200>,
		<0x0a100400 0x00000200>,
		<0x0a205050 0x00000200>,
		<0x0a219000 0x00000020>,
		<0x0a080488 0x00000008>,
		<0x0a080fb0 0x00000008>,
		<0x0a08040c 0x00000008>,
		<0x0a0120a8 0x00000008>,
		<0x0a012448 0x00000008>,
		<0x0a080c00 0x00000001>;

		reg-names = "wcnss_mmio", "wcnss_fiq",
		"pronto_phy_base", "riva_phy_base",
		"riva_ccu_base", "pronto_a2xb_base",
		"pronto_ccpu_base", "pronto_saw2_base",
		"wlan_tx_phy_aborts","wlan_brdg_err_source",
		"wlan_tx_status", "alarms_txctl",
		"alarms_tactl", "pronto_mcu_base";

		interrupts = <0 145 0 0 146 0>;
		interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq";

		qcom,pronto-vddmx-supply = <&pm8937_l3_level_ao>;
		qcom,pronto-vddcx-supply = <&pm8937_s2_level>;
		qcom,pronto-vddpx-supply = <&pm8937_l5>;
		qcom,iris-vddxo-supply = <&pm8937_l7>;
		qcom,iris-vddrfa-supply = <&pm8937_l19>;
		qcom,iris-vddpa-supply = <&pm8937_l9>;
		qcom,iris-vdddig-supply = <&pm8937_l5>;

		qcom,iris-vddxo-voltage-level = <1800000 0 1800000>;
		qcom,iris-vddrfa-voltage-level = <1300000 0 1300000>;
		qcom,iris-vddpa-voltage-level = <3300000 0 3300000>;
		qcom,iris-vdddig-voltage-level = <1800000 0 1800000>;

		qcom,vddmx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_TURBO
		RPM_SMD_REGULATOR_LEVEL_NONE
		RPM_SMD_REGULATOR_LEVEL_TURBO>;
		qcom,vddcx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_NOM
		RPM_SMD_REGULATOR_LEVEL_NONE
		RPM_SMD_REGULATOR_LEVEL_TURBO>;
		qcom,vddpx-voltage-level = <1800000 0 1800000>;

		qcom,iris-vddxo-current = <10000>;
		qcom,iris-vddrfa-current = <100000>;
		qcom,iris-vddpa-current = <515000>;
		qcom,iris-vdddig-current = <10000>;

		qcom,pronto-vddmx-current = <0>;
		qcom,pronto-vddcx-current = <0>;
		qcom,pronto-vddpx-current = <0>;

		pinctrl-names = "wcnss_default", "wcnss_sleep",
		"wcnss_gpio_default";
		pinctrl-0 = <&wcnss_default>;
		pinctrl-1 = <&wcnss_sleep>;
		pinctrl-2 = <&wcnss_gpio_default>;

		gpios = <&tlmm 76 0>, <&tlmm 77 0>, <&tlmm 78 0>,
		<&tlmm 79 0>, <&tlmm 80 0>;

		clocks = <&clock_gcc clk_xo_wlan_clk>,
		<&clock_gcc clk_rf_clk2>,
		<&clock_debug clk_gcc_debug_mux>,
		<&clock_gcc clk_wcnss_m_clk>;

		clock-names = "xo", "rf_clk", "measure", "wcnss_debug";

		qcom,has-autodetect-xo;
		qcom,is-pronto-v3;
		qcom,has-pronto-hw;
		qcom,has-vsys-adc-channel;
		qcom,wcnss-adc_tm = <&pm8937_adc_tm>;
		};

		usb_otg: usb@78db000 {
		compatible = "qcom,hsusb-otg";
		reg = <0x78db000 0x400>, <0x6c000 0x200>;