Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 84542838 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds
Browse files

[PATCH] rio cleanups 



INKERNEL is always defined
HOST is never defined
therefore RTA is also never defined

Strip the relevant garbage out of the headers on this basis.

Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 47ba87e0

drivers/char/rio/cirrus.h

+0 −142
Original line number Diff line number Diff line
@@ -40,148 +40,6 @@ 
#endif

#define _cirrus_h 1



#ifdef RTA

#define	TO_UART	RX

#define TO_DRIVER TX

#endif



#ifdef HOST

#define	TO_UART	TX

#define TO_DRIVER RX

#endif

#ifdef RTA

/* Miscellaneous defines for CIRRUS addresses and related logic for

   interrupts etc.

*/

#define	MAP(a)		((short *)(cirrus_base + (a)))

#define outp(a,b)	(*MAP (a) =(b))

#define inp(a)		((*MAP (a)) & 0xff)

#define	CIRRUS_FIRST	(short*)0x7300

#define	CIRRUS_SECOND	(short*)0x7200

#define	CIRRUS_THIRD	(short*)0x7100

#define	CIRRUS_FOURTH	(short*)0x7000

#define	PORTS_ON_CIRRUS	4

#define	CIRRUS_FIFO_SIZE	12

#define	SPACE		0x20

#define	TAB		0x09

#define	LINE_FEED	0x0a

#define	CARRIAGE_RETURN	0x0d

#define	BACKSPACE	0x08

#define	SPACES_IN_TABS	8

#define	SEND_ESCAPE	0x00

#define START_BREAK	0x81

#define	TIMER_TICK	0x82

#define STOP_BREAK	0x83

#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))

#define txack1	((short *)0x7104)

#define rxack1	((short *)0x7102)

#define mdack1  ((short *)0x7106)

#define txack2  ((short *)0x7006)

#define rxack2	((short *)0x7004)

#define mdack2  ((short *)0x7100)

#define int_latch       ((short *) 0x7800)

#define int_status      ((short *) 0x7c00)

#define tx1_pending     0x20

#define rx1_pending     0x10

#define md1_pending     0x40

#define tx2_pending     0x02

#define rx2_pending     0x01

#define md2_pending     0x40

#define module1_bits	0x07

#define module1_modern	0x08

#define module2_bits	0x70

#define module2_modern	0x80

#define module_blank	0xf

#define rs232_d25	0x0

#define	rs232_rj45	0x1

#define rs422_d25	0x3

#define parallel	0x5



#define	CLK0	0x00

#define CLK1	0x01

#define CLK2	0x02

#define CLK3	0x03

#define CLK4	0x04



#define CIRRUS_REVC    0x42

#define CIRRUS_REVE    0x44



#define	TURNON	1

#define TURNOFF 0



/* The list of CIRRUS registers. 

   NB. These registers are relative values on 8 bit boundaries whereas

   on the RTA's the CIRRUS registers are on word boundaries. Use pointer

   arithmetic (short *) to obtain the real addresses required */

#define ccr	0x05		/* Channel Command Register     */

#define ier	0x06		/* Interrupt Enable Register    */

#define cor1	0x08		/* Channel Option Register 1    */

#define cor2	0x09		/* Channel Option Register 2    */

#define cor3	0x0a		/* Channel Option Register 3    */

#define cor4	0x1e		/* Channel Option Register 4    */

#define	cor5	0x1f		/* Channel Option Register 5    */



#define ccsr	0x0b		/* Channel Control Status Register */

#define rdcr	0x0e		/* Receive Data Count Register  */

#define tdcr	0x12		/* Transmit Data Count Register */

#define mcor1	0x15		/* Modem Change Option Register 1 */

#define mcor2	0x16		/* Modem Change Option Regsiter 2 */



#define livr	0x18		/* Local Interrupt Vector Register */

#define schr1	0x1a		/* Special Character Register 1 */

#define schr2	0x1b		/* Special Character Register 2 */

#define schr3	0x1c		/* Special Character Register 3 */

#define schr4	0x1d		/* Special Character Register 4 */



#define rtr	0x20		/* Receive Timer Register */

#define rtpr	0x21		/* Receive Timeout Period Register */

#define lnc	0x24		/* Lnext character */



#define rivr	0x43		/* Receive Interrupt Vector Register    */

#define tivr	0x42		/* Transmit Interrupt Vector Register   */

#define mivr	0x41		/* Modem Interrupt Vector Register      */

#define gfrcr	0x40		/* Global Firmware Revision code Reg    */

#define ricr	0x44		/* Receive Interrupting Channel Reg     */

#define ticr	0x45		/* Transmit Interrupting Channel Reg    */

#define micr	0x46		/* Modem Interrupting Channel Register  */



#define gcr	0x4b		/* Global configuration register */

#define misr    0x4c		/* Modem interrupt status register */



#define rbusr	0x59

#define tbusr	0x5a

#define mbusr	0x5b



#define eoir	0x60		/* End Of Interrupt Register */

#define rdsr	0x62		/* Receive Data / Status Register */

#define tdr	0x63		/* Transmit Data Register */

#define svrr	0x67		/* Service Request Register */



#define car	0x68		/* Channel Access Register */

#define mir	0x69		/* Modem Interrupt Register */

#define tir	0x6a		/* Transmit Interrupt Register */

#define rir	0x6b		/* Receive Interrupt Register */

#define msvr1	0x6c		/* Modem Signal Value Register 1 */

#define msvr2	0x6d		/* Modem Signal Value Register 2 */

#define psvr	0x6f		/* Printer Signal Value Register */



#define tbpr	0x72		/* Transmit Baud Rate Period Register */

#define tcor	0x76		/* Transmit Clock Option Register */



#define rbpr	0x78		/* Receive Baud Rate Period Register */

#define rber	0x7a		/* Receive Baud Rate Extension Register */

#define rcor	0x7c		/* Receive Clock Option Register */

#define ppr	0x7e		/* Prescalar Period Register    */



/* Misc registers used for forcing the 1400 out of its reset woes */

#define airl	0x6d

#define airm	0x6e

#define airh	0x6f

#define btcr	0x66

#define mtcr	0x6c

#define tber	0x74



#endif				/* #ifdef RTA */





/* Bit fields for particular registers */

drivers/char/rio/defaults.h

+0 −7
Original line number Diff line number Diff line
@@ -45,13 +45,6 @@ static char *_rio_defaults_h_sccs = "@(#)defaults.h 1.1"; 
#define MILLISECOND           (int) (1000/64)	/* 15.625 low ticks */

#define SECOND                (int) 15625	/* Low priority ticks */



#ifdef RTA

#define RX_LIMIT       (ushort) 3

#endif

#ifdef HOST

#define RX_LIMIT       (ushort) 1

#endif



#define LINK_TIMEOUT          (int) (POLL_PERIOD / 2)

drivers/char/rio/link.h

+0 −34
Original line number Diff line number Diff line
@@ -102,30 +102,14 @@ 
/*

** LED stuff

*/

#if defined(RTA)

#define LED_OFF            ((ushort) 0)	/* LED off */

#define LED_RED            ((ushort) 1)	/* LED Red */

#define LED_GREEN          ((ushort) 2)	/* LED Green */

#define LED_ORANGE         ((ushort) 4)	/* LED Orange */

#define LED_1TO8_OPEN      ((ushort) 1)	/* Port 1->8 LED on */

#define LED_9TO16_OPEN     ((ushort) 2)	/* Port 9->16 LED on */

#define LED_SET_COLOUR(colour)	(link->led = (colour))

#define LED_OR_COLOUR(colour)	(link->led |= (colour))

#define LED_TIMEOUT(time)    (link->led_timeout = RioTimePlus(RioTime(),(time)))

#else

#define LED_SET_COLOUR(colour)

#define LED_OR_COLOUR(colour)

#define LED_TIMEOUT(time)

#endif				/* RTA */



struct LPB {

	WORD link_number;	/* Link Number */

	Channel_ptr in_ch;	/* Link In Channel */

	Channel_ptr out_ch;	/* Link Out Channel */

#ifdef RTA

	uchar stat_led;		/* Port open leds */

	uchar led;		/* True, light led! */

#endif

	BYTE attached_serial[4];	/* Attached serial number */

	BYTE attached_host_serial[4];

	/* Serial number of Host who
@@ -144,30 +128,12 @@ struct LPB { 
	WORD WaitNoBoot;	/* Secs to hold off booting */

	PKT_ptr add_packet_list;	/* Add packets to here */

	PKT_ptr remove_packet_list;	/* Send packets from here */

#ifdef RTA

#ifdef DCIRRUS

#define    QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1)

#else

#define    QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1)

#endif

	PKT_ptr_ptr rd_add;	/* Add a new Packet here */

	Q_BUF_ptr rd_add_qb;	/* Pointer to the add Q buf */

	PKT_ptr_ptr rd_add_st_qbb;	/* Pointer to start of the Q's buf */

	PKT_ptr_ptr rd_add_end_qbb;	/* Pointer to the end of the Q's buf */

	PKT_ptr_ptr rd_remove;	/* Remove a Packet here */

	Q_BUF_ptr rd_remove_qb;	/* Pointer to the remove Q buf */

	PKT_ptr_ptr rd_remove_st_qbb;	/* Pointer to the start of the Q buf */

	PKT_ptr_ptr rd_remove_end_qbb;	/* Pointer to the end of the Q buf */

	ushort pkts_in_q;	/* Packets in queue */

#endif



	Channel_ptr lrt_fail_chan;	/* Lrt's failure channel */

	Channel_ptr ltt_fail_chan;	/* Ltt's failure channel */



#if defined (HOST) || defined (INKERNEL)

	/* RUP structure for HOST to driver communications */

	struct RUP rup;

#endif

	struct RUP link_rup;	/* RUP for the link (POLL,

				   topology etc.) */

	WORD attached_link;	/* Number of attached link */

drivers/char/rio/list.h

+0 −140
Original line number Diff line number Diff line
@@ -44,8 +44,6 @@ static char *_rio_list_h_sccs = "@(#)list.h 1.9"; 


#define PKT_IN_USE    0x1



#ifdef INKERNEL



#define ZERO_PTR (ushort) 0x8000

#define	CaD	PortP->Caddr
@@ -54,143 +52,5 @@ static char *_rio_list_h_sccs = "@(#)list.h 1.9"; 
** to by the TxAdd pointer has PKT_IN_USE clear in its address.

*/



#ifndef linux

#if defined( MIPS ) && !defined( MIPSEISA )

/* May the shoes of the Devil dance on your grave for creating this */

#define   can_add_transmit(PacketP,PortP) \

          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \

          & (PKT_IN_USE<<2)))



#elif  defined(MIPSEISA) || defined(nx6000) || \

       defined(drs6000)  || defined(UWsparc)



#define   can_add_transmit(PacketP,PortP) \

          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \

	  & PKT_IN_USE))



#else

#define   can_add_transmit(PacketP,PortP) \

          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,*PortP->TxAdd)) \

	  & PKT_IN_USE))

#endif



/*

** To add a packet to the queue, you set the PKT_IN_USE bit in the address,

** and then move the TxAdd pointer along one position to point to the next

** packet pointer. You must wrap the pointer from the end back to the start.

*/

#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)

#   define add_transmit(PortP)  \

	WINDW(PortP->TxAdd,RINDW(PortP->TxAdd) | PKT_IN_USE);\

	if (PortP->TxAdd == PortP->TxEnd)\

	    PortP->TxAdd = PortP->TxStart;\

	else\

	    PortP->TxAdd++;\

	WWORD(PortP->PhbP->tx_add , RIO_OFF(CaD,PortP->TxAdd));

#elif defined(AIX)

#   define add_transmit(PortP)  \

	{\

	    register ushort *TxAddP = (ushort *)RIO_PTR(Cad,PortP->TxAddO);\

	    WINDW( TxAddP, RINDW( TxAddP ) | PKT_IN_USE );\

	    if (PortP->TxAddO == PortP->TxEndO )\

		PortP->TxAddO = PortP->TxStartO;\

	    else\

		PortP->TxAddO += sizeof(ushort);\

	    WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->tx_add , PortP->TxAddO );\

	}

#else

#   define add_transmit(PortP)  \

	*PortP->TxAdd |= PKT_IN_USE;\

	if (PortP->TxAdd == PortP->TxEnd)\

	    PortP->TxAdd = PortP->TxStart;\

	else\

	    PortP->TxAdd++;\

	PortP->PhbP->tx_add = RIO_OFF(CaD,PortP->TxAdd);

#endif



/*

** can_remove_receive( PacketP, PortP ) returns non-zero if PKT_IN_USE is set

** for the next packet on the queue. It will also set PacketP to point to the

** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,

** then can_remove_receive() returns 0.

*/

#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)

#   define can_remove_receive(PacketP,PortP) \

	((RINDW(PortP->RxRemove) & PKT_IN_USE) ? \

	(PacketP=(struct PKT *)RIO_PTR(CaD,(RINDW(PortP->RxRemove) & ~PKT_IN_USE))):0)

#elif defined(AIX)

#   define can_remove_receive(PacketP,PortP) \

	((RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & PKT_IN_USE) ? \

	(PacketP=(struct PKT *)RIO_PTR(Cad,RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & ~PKT_IN_USE)):0)

#else

#   define can_remove_receive(PacketP,PortP) \

	((*PortP->RxRemove & PKT_IN_USE) ? \

	(PacketP=(struct PKT *)RIO_PTR(CaD,(*PortP->RxRemove & ~PKT_IN_USE))):0)

#endif





/*

** Will God see it within his heart to forgive us for this thing that

** we have created? To remove a packet from the receive queue you clear

** its PKT_IN_USE bit, and then bump the pointers. Once the pointers

** get to the end, they must be wrapped back to the start.

*/

#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)

#   define remove_receive(PortP) \

	WINDW(PortP->RxRemove, (RINDW(PortP->RxRemove) & ~PKT_IN_USE));\

	if (PortP->RxRemove == PortP->RxEnd)\

	    PortP->RxRemove = PortP->RxStart;\

	else\

	    PortP->RxRemove++;\

	WWORD(PortP->PhbP->rx_remove , RIO_OFF(CaD,PortP->RxRemove));

#elif defined(AIX)

#   define remove_receive(PortP) \

    {\

        register ushort *RxRemoveP = (ushort *)RIO_PTR(Cad,PortP->RxRemoveO);\

        WINDW( RxRemoveP, RINDW( RxRemoveP ) & ~PKT_IN_USE );\

        if (PortP->RxRemoveO == PortP->RxEndO)\

            PortP->RxRemoveO = PortP->RxStartO;\

        else\

            PortP->RxRemoveO += sizeof(ushort);\

        WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->rx_remove, PortP->RxRemoveO );\

    }

#else

#   define remove_receive(PortP) \

	*PortP->RxRemove &= ~PKT_IN_USE;\

	if (PortP->RxRemove == PortP->RxEnd)\

	    PortP->RxRemove = PortP->RxStart;\

	else\

	    PortP->RxRemove++;\

	PortP->PhbP->rx_remove = RIO_OFF(CaD,PortP->RxRemove);

#endif

#endif





#else				/* !IN_KERNEL */



#define ZERO_PTR NULL





#ifdef HOST

/* #define can_remove_transmit(pkt,phb) ((((char*)pkt = (*(char**)(phb->tx_remove))-1) || 1)) && (*phb->u3.s2.tx_remove_ptr & PKT_IN_USE))   */

#define remove_transmit(phb) *phb->u3.s2.tx_remove_ptr &= ~(ushort)PKT_IN_USE;\

                             if (phb->tx_remove == phb->tx_end)\

                                phb->tx_remove = phb->tx_start;\

                             else\

                                phb->tx_remove++;

#define can_add_receive(phb) !(*phb->u4.s2.rx_add_ptr & PKT_IN_USE)

#define add_receive(pkt,phb) *phb->rx_add = pkt;\

                             *phb->u4.s2.rx_add_ptr |= PKT_IN_USE;\

                             if (phb->rx_add == phb->rx_end)\

                                phb->rx_add = phb->rx_start;\

                             else\

                                phb->rx_add++;

#endif

#endif



#ifdef RTA

#define splx(oldspl)    if ((oldspl) == 0) spl0()

#endif



#endif				/* ifndef _list.h */

/*********** end of file ***********/

drivers/char/rio/parmmap.h

+0 −5
Original line number Diff line number Diff line
@@ -78,14 +78,9 @@ struct PARM_MAP { 
	WORD idle_count;	/* Idle time counter */

	WORD busy_count;	/* Busy counter */

	WORD idle_control;	/* Control Idle Process */

#if defined(HOST) || defined(INKERNEL)

	WORD tx_intr;		/* TX interrupt pending */

	WORD rx_intr;		/* RX interrupt pending */

	WORD rup_intr;		/* RUP interrupt pending */

#endif

#if defined(RTA)

	WORD dying_count;	/* Count of processes dead */

#endif

};



#endif