powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts (81c6fdb6) · Commits · e / devices / android_kernel_xiaomi_markw

arch/powerpc/boot/dts/mpc5121.dtsi

0 → 100644

+410 −0

Original line number	Diff line number	Diff line
		/*
		* base MPC5121 Device Tree Source
		*
		* Copyright 2007-2008 Freescale Semiconductor Inc.
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		* Free Software Foundation; either version 2 of the License, or (at your
		* option) any later version.
		*/

		/dts-v1/;

		/ {
		model = "mpc5121";
		compatible = "fsl,mpc5121";
		#address-cells = <1>;
		#size-cells = <1>;
		interrupt-parent = <&ipic>;

		aliases {
		ethernet0 = &eth0;
		pci = &pci;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,5121@0 {
		device_type = "cpu";
		reg = <0>;
		d-cache-line-size = <0x20>; /* 32 bytes */
		i-cache-line-size = <0x20>; /* 32 bytes */
		d-cache-size = <0x8000>; /* L1, 32K */
		i-cache-size = <0x8000>; /* L1, 32K */
		timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
		bus-frequency = <198000000>; /* 198 MHz csb bus */
		clock-frequency = <396000000>; /* 396 MHz ppc core */
		};
		};

		memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>; /* 256MB at 0 */
		};

		mbx@20000000 {
		compatible = "fsl,mpc5121-mbx";
		reg = <0x20000000 0x4000>;
		interrupts = <66 0x8>;
		};

		sram@30000000 {
		compatible = "fsl,mpc5121-sram";
		reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */
		};

		nfc@40000000 {
		compatible = "fsl,mpc5121-nfc";
		reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */
		interrupts = <6 8>;
		#address-cells = <1>;
		#size-cells = <1>;
		};

		localbus@80000020 {
		compatible = "fsl,mpc5121-localbus";
		#address-cells = <2>;
		#size-cells = <1>;
		reg = <0x80000020 0x40>;
		interrupts = <7 0x8>;
		ranges = <0x0 0x0 0xfc000000 0x04000000>;
		};

		soc@80000000 {
		compatible = "fsl,mpc5121-immr";
		#address-cells = <1>;
		#size-cells = <1>;
		#interrupt-cells = <2>;
		ranges = <0x0 0x80000000 0x400000>;
		reg = <0x80000000 0x400000>;
		bus-frequency = <66000000>; /* 66 MHz ips bus */


		/*
		* IPIC
		* interrupts cell = <intr #, sense>
		* sense values match linux IORESOURCE_IRQ_* defines:
		* sense == 8: Level, low assertion
		* sense == 2: Edge, high-to-low change
		*/
		ipic: interrupt-controller@c00 {
		compatible = "fsl,mpc5121-ipic", "fsl,ipic";
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <2>;
		reg = <0xc00 0x100>;
		};

		/* Watchdog timer */
		wdt@900 {
		compatible = "fsl,mpc5121-wdt";
		reg = <0x900 0x100>;
		};

		/* Real time clock */
		rtc@a00 {
		compatible = "fsl,mpc5121-rtc";
		reg = <0xa00 0x100>;
		interrupts = <79 0x8 80 0x8>;
		};

		/* Reset module */
		reset@e00 {
		compatible = "fsl,mpc5121-reset";
		reg = <0xe00 0x100>;
		};

		/* Clock control */
		clock@f00 {
		compatible = "fsl,mpc5121-clock";
		reg = <0xf00 0x100>;
		};

		/* Power Management Controller */
		pmc@1000{
		compatible = "fsl,mpc5121-pmc";
		reg = <0x1000 0x100>;
		interrupts = <83 0x8>;
		};

		gpio@1100 {
		compatible = "fsl,mpc5121-gpio";
		reg = <0x1100 0x100>;
		interrupts = <78 0x8>;
		};

		can@1300 {
		compatible = "fsl,mpc5121-mscan";
		reg = <0x1300 0x80>;
		interrupts = <12 0x8>;
		};

		can@1380 {
		compatible = "fsl,mpc5121-mscan";
		reg = <0x1380 0x80>;
		interrupts = <13 0x8>;
		};

		sdhc@1500 {
		compatible = "fsl,mpc5121-sdhc";
		reg = <0x1500 0x100>;
		interrupts = <8 0x8>;
		};

		i2c@1700 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1700 0x20>;
		interrupts = <9 0x8>;
		};

		i2c@1720 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1720 0x20>;
		interrupts = <10 0x8>;
		};

		i2c@1740 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1740 0x20>;
		interrupts = <11 0x8>;
		};

		i2ccontrol@1760 {
		compatible = "fsl,mpc5121-i2c-ctrl";
		reg = <0x1760 0x8>;
		};

		axe@2000 {
		compatible = "fsl,mpc5121-axe";
		reg = <0x2000 0x100>;
		interrupts = <42 0x8>;
		};

		display@2100 {
		compatible = "fsl,mpc5121-diu";
		reg = <0x2100 0x100>;
		interrupts = <64 0x8>;
		};

		can@2300 {
		compatible = "fsl,mpc5121-mscan";
		reg = <0x2300 0x80>;
		interrupts = <90 0x8>;
		};

		can@2380 {
		compatible = "fsl,mpc5121-mscan";
		reg = <0x2380 0x80>;
		interrupts = <91 0x8>;
		};

		viu@2400 {
		compatible = "fsl,mpc5121-viu";
		reg = <0x2400 0x400>;
		interrupts = <67 0x8>;
		};

		mdio@2800 {
		compatible = "fsl,mpc5121-fec-mdio";
		reg = <0x2800 0x800>;
		#address-cells = <1>;
		#size-cells = <0>;
		};

		eth0: ethernet@2800 {
		device_type = "network";
		compatible = "fsl,mpc5121-fec";
		reg = <0x2800 0x800>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <4 0x8>;
		};

		/* USB1 using external ULPI PHY */
		usb@3000 {
		compatible = "fsl,mpc5121-usb2-dr";
		reg = <0x3000 0x600>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <43 0x8>;
		dr_mode = "otg";
		phy_type = "ulpi";
		};

		/* USB0 using internal UTMI PHY */
		usb@4000 {
		compatible = "fsl,mpc5121-usb2-dr";
		reg = <0x4000 0x600>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <44 0x8>;
		dr_mode = "otg";
		phy_type = "utmi_wide";
		};

		/* IO control */
		ioctl@a000 {
		compatible = "fsl,mpc5121-ioctl";
		reg = <0xA000 0x1000>;
		};

		/* LocalPlus controller */
		lpc@10000 {
		compatible = "fsl,mpc5121-lpc";
		reg = <0x10000 0x200>;
		};

		pata@10200 {
		compatible = "fsl,mpc5121-pata";
		reg = <0x10200 0x100>;
		interrupts = <5 0x8>;
		};

		/* 512x PSCs are not 52xx PSC compatible */

		/* PSC0 */
		psc@11000 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11000 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC1 */
		psc@11100 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11100 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC2 */
		psc@11200 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11200 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC3 */
		psc@11300 {
		compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
		reg = <0x11300 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC4 */
		psc@11400 {
		compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
		reg = <0x11400 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC5 */
		psc@11500 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11500 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC6 */
		psc@11600 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11600 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC7 */
		psc@11700 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11700 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC8 */
		psc@11800 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11800 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC9 */
		psc@11900 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11900 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC10 */
		psc@11a00 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11a00 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		/* PSC11 */
		psc@11b00 {
		compatible = "fsl,mpc5121-psc";
		reg = <0x11b00 0x100>;
		interrupts = <40 0x8>;
		fsl,rx-fifo-size = <16>;
		fsl,tx-fifo-size = <16>;
		};

		pscfifo@11f00 {
		compatible = "fsl,mpc5121-psc-fifo";
		reg = <0x11f00 0x100>;
		interrupts = <40 0x8>;
		};

		dma@14000 {
		compatible = "fsl,mpc5121-dma";
		reg = <0x14000 0x1800>;
		interrupts = <65 0x8>;
		};
		};

		pci: pci@80008500 {
		compatible = "fsl,mpc5121-pci";
		device_type = "pci";
		interrupts = <1 0x8>;
		clock-frequency = <0>;
		#address-cells = <3>;
		#size-cells = <2>;
		#interrupt-cells = <1>;

		reg = <0x80008500 0x100 /* internal registers */
		0x80008300 0x8>; /* config space access registers */
		bus-range = <0x0 0x0>;
		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
		0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
		0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
		};
		};

arch/powerpc/boot/dts/mpc5121ads.dts

+39 −280

Original line number	Diff line number	Diff line
		/*
		* MPC5121E ADS Device Tree Source
		*
		* Copyright 2007,2008 Freescale Semiconductor Inc.
		* Copyright 2007-2008 Freescale Semiconductor Inc.
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the
		@@ -9,74 +9,26 @@
		* option) any later version.
		*/

		/dts-v1/;
		/include/ "mpc5121.dtsi"

		/ {
		model = "mpc5121ads";
		compatible = "fsl,mpc5121ads";
		#address-cells = <1>;
		#size-cells = <1>;

		aliases {
		pci = &pci;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,5121@0 {
		device_type = "cpu";
		reg = <0>;
		d-cache-line-size = <0x20>; // 32 bytes
		i-cache-line-size = <0x20>; // 32 bytes
		d-cache-size = <0x8000>; // L1, 32K
		i-cache-size = <0x8000>; // L1, 32K
		timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
		bus-frequency = <198000000>; // 198 MHz csb bus
		clock-frequency = <396000000>; // 396 MHz ppc core
		};
		};

		memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>; // 256MB at 0
		};

		mbx@20000000 {
		compatible = "fsl,mpc5121-mbx";
		reg = <0x20000000 0x4000>;
		interrupts = <66 0x8>;
		interrupt-parent = < &ipic >;
		};

		sram@30000000 {
		compatible = "fsl,mpc5121-sram";
		reg = <0x30000000 0x20000>; // 128K at 0x30000000
		};

		nfc@40000000 {
		compatible = "fsl,mpc5121-nfc";
		reg = <0x40000000 0x100000>; // 1M at 0x40000000
		interrupts = <6 8>;
		interrupt-parent = < &ipic >;
		#address-cells = <1>;
		#size-cells = <1>;
		// ADS has two Hynix 512MB Nand flash chips in a single
		// stacked package.
		/*
		* ADS has two Hynix 512MB Nand flash chips in a single
		* stacked package.
		*/
		chips = <2>;

		nand@0 {
		label = "nand";
		reg = <0x00000000 0x40000000>; // 512MB + 512MB
		reg = <0x00000000 0x40000000>; /* 512MB + 512MB */
		};
		};

		localbus@80000020 {
		compatible = "fsl,mpc5121-localbus";
		#address-cells = <2>;
		#size-cells = <1>;
		reg = <0x80000020 0x40>;

		ranges = <0x0 0x0 0xfc000000 0x04000000
		0x2 0x0 0x82000000 0x00008000>;

		@@ -87,6 +39,7 @@
		#size-cells = <1>;
		bank-width = <4>;
		device-width = <2>;

		protected@0 {
		label = "protected";
		reg = <0x00000000 0x00040000>; // first sector is protected
		@@ -121,91 +74,18 @@
		interrupt-controller;
		#interrupt-cells = <2>;
		reg = <0x2 0xa 0x5>;
		interrupt-parent = < &ipic >;
		// irq routing
		// all irqs but touch screen are routed to irq0 (ipic 48)
		// touch screen is statically routed to irq1 (ipic 17)
		// so don't use it here
		/* irq routing:
		* all irqs but touch screen are routed to irq0 (ipic 48)
		* touch screen is statically routed to irq1 (ipic 17)
		* so don't use it here
		*/
		interrupts = <48 0x8>;
		};
		};

		soc@80000000 {
		compatible = "fsl,mpc5121-immr";
		#address-cells = <1>;
		#size-cells = <1>;
		#interrupt-cells = <2>;
		ranges = <0x0 0x80000000 0x400000>;
		reg = <0x80000000 0x400000>;
		bus-frequency = <66000000>; // 66 MHz ips bus


		// IPIC
		// interrupts cell = <intr #, sense>
		// sense values match linux IORESOURCE_IRQ_* defines:
		// sense == 8: Level, low assertion
		// sense == 2: Edge, high-to-low change
		//
		ipic: interrupt-controller@c00 {
		compatible = "fsl,mpc5121-ipic", "fsl,ipic";
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <2>;
		reg = <0xc00 0x100>;
		};

		rtc@a00 { // Real time clock
		compatible = "fsl,mpc5121-rtc";
		reg = <0xa00 0x100>;
		interrupts = <79 0x8 80 0x8>;
		interrupt-parent = < &ipic >;
		};

		reset@e00 { // Reset module
		compatible = "fsl,mpc5121-reset";
		reg = <0xe00 0x100>;
		};

		clock@f00 { // Clock control
		compatible = "fsl,mpc5121-clock";
		reg = <0xf00 0x100>;
		};

		pmc@1000{ //Power Management Controller
		compatible = "fsl,mpc5121-pmc";
		reg = <0x1000 0x100>;
		interrupts = <83 0x2>;
		interrupt-parent = < &ipic >;
		};

		gpio@1100 {
		compatible = "fsl,mpc5121-gpio";
		reg = <0x1100 0x100>;
		interrupts = <78 0x8>;
		interrupt-parent = < &ipic >;
		};

		can@1300 {
		compatible = "fsl,mpc5121-mscan";
		interrupts = <12 0x8>;
		interrupt-parent = < &ipic >;
		reg = <0x1300 0x80>;
		};

		can@1380 {
		compatible = "fsl,mpc5121-mscan";
		interrupts = <13 0x8>;
		interrupt-parent = < &ipic >;
		reg = <0x1380 0x80>;
		};

		i2c@1700 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1700 0x20>;
		interrupts = <9 0x8>;
		interrupt-parent = < &ipic >;
		fsl,preserve-clocking;

		hwmon@4a {
		@@ -224,196 +104,75 @@
		};
		};

		i2c@1720 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1720 0x20>;
		interrupts = <10 0x8>;
		interrupt-parent = < &ipic >;
		};

		i2c@1740 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
		reg = <0x1740 0x20>;
		interrupts = <11 0x8>;
		interrupt-parent = < &ipic >;
		eth0: ethernet@2800 {
		phy-handle = <&phy0>;
		};

		i2ccontrol@1760 {
		compatible = "fsl,mpc5121-i2c-ctrl";
		reg = <0x1760 0x8>;
		can@2300 {
		status = "disabled";
		};

		axe@2000 {
		compatible = "fsl,mpc5121-axe";
		reg = <0x2000 0x100>;
		interrupts = <42 0x8>;
		interrupt-parent = < &ipic >;
		can@2380 {
		status = "disabled";
		};

		display@2100 {
		compatible = "fsl,mpc5121-diu";
		reg = <0x2100 0x100>;
		interrupts = <64 0x8>;
		interrupt-parent = < &ipic >;
		viu@2400 {
		status = "disabled";
		};

		mdio@2800 {
		compatible = "fsl,mpc5121-fec-mdio";
		reg = <0x2800 0x800>;
		#address-cells = <1>;
		#size-cells = <0>;
		phy: ethernet-phy@0 {
		phy0: ethernet-phy@0 {
		reg = <1>;
		device_type = "ethernet-phy";
		};
		};

		ethernet@2800 {
		device_type = "network";
		compatible = "fsl,mpc5121-fec";
		reg = <0x2800 0x800>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <4 0x8>;
		interrupt-parent = < &ipic >;
		phy-handle = < &phy >;
		fsl,align-tx-packets = <4>;
		/* mpc5121ads only uses USB0 */
		usb@3000 {
		status = "disabled";
		};

		// 5121e has two dr usb modules
		// mpc5121_ads only uses USB0

		// USB1 using external ULPI PHY
		//usb@3000 {
		// compatible = "fsl,mpc5121-usb2-dr";
		// reg = <0x3000 0x1000>;
		// #address-cells = <1>;
		// #size-cells = <0>;
		// interrupt-parent = < &ipic >;
		// interrupts = <43 0x8>;
		// dr_mode = "otg";
		// phy_type = "ulpi";
		//};

		// USB0 using internal UTMI PHY
		/* USB0 using internal UTMI PHY */
		usb@4000 {
		compatible = "fsl,mpc5121-usb2-dr";
		reg = <0x4000 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupt-parent = < &ipic >;
		interrupts = <44 0x8>;
		dr_mode = "otg";
		phy_type = "utmi_wide";
		dr_mode = "host";
		fsl,invert-drvvbus;
		fsl,invert-pwr-fault;
		};

		// IO control
		ioctl@a000 {
		compatible = "fsl,mpc5121-ioctl";
		reg = <0xA000 0x1000>;
		};

		pata@10200 {
		compatible = "fsl,mpc5121-pata";
		reg = <0x10200 0x100>;
		interrupts = <5 0x8>;
		interrupt-parent = < &ipic >;
		};

		// 512x PSCs are not 52xx PSC compatible
		// PSC3 serial port A aka ttyPSC0
		serial@11300 {
		device_type = "serial";
		/* PSC3 serial port A aka ttyPSC0 */
		psc@11300 {
		compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
		// Logical port assignment needed until driver
		// learns to use aliases
		port-number = <0>;
		cell-index = <3>;
		reg = <0x11300 0x100>;
		interrupts = <40 0x8>;
		interrupt-parent = < &ipic >;
		rx-fifo-size = <16>;
		tx-fifo-size = <16>;
		};

		// PSC4 serial port B aka ttyPSC1
		serial@11400 {
		device_type = "serial";
		/* PSC4 serial port B aka ttyPSC1 */
		psc@11400 {
		compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
		// Logical port assignment needed until driver
		// learns to use aliases
		port-number = <1>;
		cell-index = <4>;
		reg = <0x11400 0x100>;
		interrupts = <40 0x8>;
		interrupt-parent = < &ipic >;
		rx-fifo-size = <16>;
		tx-fifo-size = <16>;
		};

		// PSC5 in ac97 mode
		ac97@11500 {
		/* PSC5 in ac97 mode */
		ac97: psc@11500 {
		compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
		cell-index = <5>;
		reg = <0x11500 0x100>;
		interrupts = <40 0x8>;
		interrupt-parent = < &ipic >;
		fsl,mode = "ac97-slave";
		rx-fifo-size = <384>;
		tx-fifo-size = <384>;
		};

		pscfifo@11f00 {
		compatible = "fsl,mpc5121-psc-fifo";
		reg = <0x11f00 0x100>;
		interrupts = <40 0x8>;
		interrupt-parent = < &ipic >;
		};

		dma@14000 {
		compatible = "fsl,mpc5121-dma";
		reg = <0x14000 0x1800>;
		interrupts = <65 0x8>;
		interrupt-parent = < &ipic >;
		fsl,rx-fifo-size = <384>;
		fsl,tx-fifo-size = <384>;
		};

		};

		pci: pci@80008500 {
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
		// IDSEL 0x15 - Slot 1 PCI
		/* IDSEL 0x15 - Slot 1 PCI */
		0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
		0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
		0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
		0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8

		// IDSEL 0x16 - Slot 2 MiniPCI
		/* IDSEL 0x16 - Slot 2 MiniPCI */
		0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
		0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8

		// IDSEL 0x17 - Slot 3 MiniPCI
		/* IDSEL 0x17 - Slot 3 MiniPCI */
		0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
		0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
		>;
		interrupt-parent = < &ipic >;
		interrupts = <1 0x8>;
		bus-range = <0 0>;
		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
		0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
		0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
		clock-frequency = <0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0x80008500 0x100 /* internal registers */
		0x80008300 0x8>; /* config space access registers */
		compatible = "fsl,mpc5121-pci";
		device_type = "pci";
		};
		};