Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7ebe0992 authored by gaolez's avatar gaolez
Browse files

ARM: dts: msm: Add wlan naples support to apq8009 dragon refboard 



Add wlan naples support to apq8009-dragon refboard.

Change-Id: I8ff523b881004814b18403703e652e1890fe7d5a
Signed-off-by: default avatarGaole Zhang <gaolez@codeaurora.org>
parent ef2f5e61

arch/arm/boot/dts/qcom/apq8009-dragon.dtsi

+82 −1
Original line number Diff line number Diff line
@@ -58,11 +58,92 @@ 
	mdss_mdp: qcom,mdss_mdp@1a00000 {

		status = "disabled";

	};



	cnss_sdio: qcom,cnss_sdio {

		compatible = "qcom,cnss_sdio";

		subsys-name = "AR6320";

		/**

		 * There is no vdd-wlan on board and this is not for DSRC.

		 * IO and XTAL share the same vreg.

		 */

		vdd-wlan-io-supply = <&pm8916_l5>;

		qcom,wlan-ramdump-dynamic = <0x200000>;

		qcom,msm-bus,name = "msm-cnss";

		qcom,msm-bus,num-cases = <4>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

				<79 512 0 0>,             /* No vote */

				<79 512 6250 200000>,     /* 50 Mbps */

				<79 512 25000 200000>,    /* 200 Mbps */

				<79 512 2048000 4096000>; /* MAX */

	};



&sdhc_2 {

	qcom,wcnss-wlan@a000000 {

		status = "disabled";

	};



	qcom,pronto@a21b000 {

		status = "disabled";

	};

};



&msm_gpio {

	sdc2_wlan_gpio_on: sdc2_wlan_gpio_on {

		mux {

			pins = "gpio43";

			function = "gpio";

		};

		config {

			pins = "gpio43";

			drive-strength = <10>;

			bias-pull-up;

			output-high;

		};

	};



	sdc2_wlan_gpio_off: sdc2_wlan_gpio_off {

		mux {

			pins = "gpio43";

			function = "gpio";

		};

		config {

			pins = "gpio43";

			drive-strength = <2>;

			bias-disable;

			output-low;

		};

	};

};



&sdhc_2 {

	/delete-property/cd-gpios;

	#address-cells = <0>;

	interrupt-parent = <&sdhc_2>;

	interrupts = <0 1 2>;

	#interrupt-cells = <1>;

	interrupt-map-mask = <0xffffffff>;

	interrupt-map = <0 &intc 0 125 0>,

			<1 &intc 0 221 0>,

			<2 &msm_gpio 40 0x1>;

	interrupt-names = "hc_irq", "pwr_irq", "sdiowakeup_irq";



	qcom,vdd-voltage-level = <1800000 2950000>;

	qcom,vdd-current-level = <15000 400000>;



	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <200 50000>;

	qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on

			&sdc2_wlan_gpio_on>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off

			&sdc2_wlan_gpio_off>;

	qcom,nonremovable;

	qcom,core_3_0v_support;

	status = "ok";

};



&usb_otg {

		interrupts = <0 134 0>,<0 140 0>,<0 136 0>;