drivers/net/myri10ge: Use pr_<level> and netdev_<level> (78ca90ea) · Commits · e / devices / android_kernel_xiaomi_markw

drivers/net/myri10ge/myri10ge.c

+67 −116

Original line number	Diff line number	Diff line
		@@ -38,6 +38,8 @@
		* Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
		*************************************************************************/

		#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

		#include <linux/tcp.h>
		#include <linux/netdevice.h>
		#include <linux/skbuff.h>
		@@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
		status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);

		if (status) {
		printk(KERN_ERR
		"myri10ge: %s: Failed to set flow control mode\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "Failed to set flow control mode\n");
		return status;
		}
		mgp->pause = pause;
		@@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
		ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
		status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
		if (status)
		printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "Failed to set promisc mode\n");
		}

		static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
		@@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)

		if (mgp->link_state == MXGEFW_LINK_UP) {
		if (netif_msg_link(mgp))
		printk(KERN_INFO
		"myri10ge: %s: link up\n",
		mgp->dev->name);
		netdev_info(mgp->dev, "link up\n");
		netif_carrier_on(mgp->dev);
		mgp->link_changes++;
		} else {
		if (netif_msg_link(mgp))
		printk(KERN_INFO
		"myri10ge: %s: link %s\n",
		mgp->dev->name,
		(link_up == MXGEFW_LINK_MYRINET ?
		netdev_info(mgp->dev, "link %s\n",
		link_up == MXGEFW_LINK_MYRINET ?
		"mismatch (Myrinet detected)" :
		"down"));
		"down");
		netif_carrier_off(mgp->dev);
		mgp->link_changes++;
		}
		@@ -1503,8 +1498,7 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
		ntohl(stats->rdma_tags_available)) {
		mgp->rdma_tags_available =
		ntohl(stats->rdma_tags_available);
		printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
		"%d tags left\n", mgp->dev->name,
		netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
		mgp->rdma_tags_available);
		}
		mgp->down_cnt += stats->link_down;
		@@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
		if (send_done_count != tx->pkt_done)
		myri10ge_tx_done(ss, (int)send_done_count);
		if (unlikely(i > myri10ge_max_irq_loops)) {
		printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "irq stuck?\n");
		stats->valid = 0;
		schedule_work(&mgp->watchdog_work);
		}
		@@ -1614,15 +1607,13 @@ myri10ge_get_settings(struct net_device netdev, struct ethtool_cmd cmd)
		*/
		ptr = mgp->product_code_string;
		if (ptr == NULL) {
		printk(KERN_ERR "myri10ge: %s: Missing product code\n",
		netdev->name);
		netdev_err(netdev, "Missing product code\n");
		return 0;
		}
		for (i = 0; i < 3; i++, ptr++) {
		ptr = strchr(ptr, '-');
		if (ptr == NULL) {
		printk(KERN_ERR "myri10ge: %s: Invalid product "
		"code %s\n", netdev->name,
		netdev_err(netdev, "Invalid product code %s\n",
		mgp->product_code_string);
		return 0;
		}
		@@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
		mgp->small_bytes + MXGEFW_PAD, 0);

		if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
		printk(KERN_ERR
		"myri10ge: %s:slice-%d: alloced only %d small bufs\n",
		dev->name, slice, ss->rx_small.fill_cnt);
		netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
		slice, ss->rx_small.fill_cnt);
		goto abort_with_rx_small_ring;
		}

		myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
		if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
		printk(KERN_ERR
		"myri10ge: %s:slice-%d: alloced only %d big bufs\n",
		dev->name, slice, ss->rx_big.fill_cnt);
		netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
		slice, ss->rx_big.fill_cnt);
		goto abort_with_rx_big_ring;
		}

		@@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev)
		mgp->running = MYRI10GE_ETH_STARTING;
		status = myri10ge_reset(mgp);
		if (status != 0) {
		printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
		netdev_err(dev, "failed reset\n");
		goto abort_with_nothing;
		}

		@@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev)
		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
		&cmd, 0);
		if (status != 0) {
		printk(KERN_ERR
		"myri10ge: %s: failed to set number of slices\n",
		dev->name);
		netdev_err(dev, "failed to set number of slices\n");
		goto abort_with_nothing;
		}
		/* setup the indirection table */
		@@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev)
		MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
		&cmd, 0);
		if (status != 0) {
		printk(KERN_ERR
		"myri10ge: %s: failed to setup rss tables\n",
		dev->name);
		netdev_err(dev, "failed to setup rss tables\n");
		goto abort_with_nothing;
		}

		@@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev)
		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
		&cmd, 0);
		if (status != 0) {
		printk(KERN_ERR
		"myri10ge: %s: failed to enable slices\n",
		dev->name);
		netdev_err(dev, "failed to enable slices\n");
		goto abort_with_nothing;
		}
		}
		@@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev)

		status = myri10ge_get_txrx(mgp, slice);
		if (status != 0) {
		printk(KERN_ERR
		"myri10ge: %s: failed to get ring sizes or locations\n",
		dev->name);
		netdev_err(dev, "failed to get ring sizes or locations\n");
		goto abort_with_rings;
		}
		status = myri10ge_allocate_rings(ss);
		@@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev)
		if (slice == 0 \|\| mgp->dev->real_num_tx_queues > 1)
		status = myri10ge_set_stats(mgp, slice);
		if (status) {
		printk(KERN_ERR
		"myri10ge: %s: Couldn't set stats DMA\n",
		dev->name);
		netdev_err(dev, "Couldn't set stats DMA\n");
		goto abort_with_rings;
		}

		@@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev)
		status \|=
		myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
		if (status) {
		printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
		dev->name);
		netdev_err(dev, "Couldn't set buffer sizes\n");
		goto abort_with_rings;
		}

		@@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev)
		cmd.data0 = 0;
		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
		if (status && status != -ENOSYS) {
		printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
		dev->name);
		netdev_err(dev, "Couldn't set TSO mode\n");
		goto abort_with_rings;
		}

		@@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev)

		status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
		if (status) {
		printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
		dev->name);
		netdev_err(dev, "Couldn't bring up link\n");
		goto abort_with_rings;
		}

		@@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev)
		status =
		myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
		if (status)
		printk(KERN_ERR
		"myri10ge: %s: Couldn't bring down link\n",
		dev->name);
		netdev_err(dev, "Couldn't bring down link\n");

		wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
		HZ);
		if (old_down_cnt == mgp->down_cnt)
		printk(KERN_ERR "myri10ge: %s never got down irq\n",
		dev->name);
		netdev_err(dev, "never got down irq\n");
		}
		netif_tx_disable(dev);
		myri10ge_free_irq(mgp);
		@@ -2944,9 +2917,7 @@ abort_linearize:
		idx = (idx + 1) & tx->mask;
		} while (idx != last_idx);
		if (skb_is_gso(skb)) {
		printk(KERN_ERR
		"myri10ge: %s: TSO but wanted to linearize?!?!?\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
		goto drop;
		}

		@@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)

		err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
		if (err != 0) {
		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
		" error status: %d\n", dev->name, err);
		netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
		err);
		goto abort;
		}

		@@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
		err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
		&cmd, 1);
		if (err != 0) {
		printk(KERN_ERR
		"myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
		", error status: %d\n", dev->name, err);
		netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
		err);
		goto abort;
		}

		@@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
		&cmd, 1);

		if (err != 0) {
		printk(KERN_ERR "myri10ge: %s: Failed "
		"MXGEFW_JOIN_MULTICAST_GROUP, error status:"
		"%d\t", dev->name, err);
		printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
		netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
		err, mc_list->dmi_addr);
		goto abort;
		}
		}
		/* Enable multicast filtering */
		err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
		if (err != 0) {
		printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
		"error status: %d\n", dev->name, err);
		netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
		err);
		goto abort;
		}

		@@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device dev, void addr)

		status = myri10ge_update_mac_address(mgp, sa->sa_data);
		if (status != 0) {
		printk(KERN_ERR
		"myri10ge: %s: changing mac address failed with %d\n",
		dev->name, status);
		netdev_err(dev, "changing mac address failed with %d\n",
		status);
		return status;
		}

		@@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
		int error = 0;

		if ((new_mtu < 68) \|\| (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
		printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
		dev->name, new_mtu);
		netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
		return -EINVAL;
		}
		printk(KERN_INFO "%s: changing mtu from %d to %d\n",
		dev->name, dev->mtu, new_mtu);
		netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
		if (mgp->running) {
		/* if we change the mtu on an active device, we must
		* reset the device so the firmware sees the change */
		@@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)

		netif_device_detach(netdev);
		if (netif_running(netdev)) {
		printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
		netdev_info(netdev, "closing\n");
		rtnl_lock();
		myri10ge_close(netdev);
		rtnl_unlock();
		@@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
		msleep(5); /* give card time to respond */
		pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
		if (vendor == 0xffff) {
		printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "device disappeared!\n");
		return -EIO;
		}

		@@ -3463,9 +3427,8 @@ static void myri10ge_watchdog(struct work_struct *work)
		* if the card rebooted due to a parity error
		* For now, just report it */
		reboot = myri10ge_read_reboot(mgp);
		printk(KERN_ERR
		"myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
		mgp->dev->name, reboot,
		netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
		reboot,
		myri10ge_reset_recover ? "" : " not");
		if (myri10ge_reset_recover == 0)
		return;
		@@ -3494,28 +3457,23 @@ static void myri10ge_watchdog(struct work_struct *work)
		if (cmd == 0xffff) {
		pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
		if (vendor == 0xffff) {
		printk(KERN_ERR
		"myri10ge: %s: device disappeared!\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "device disappeared!\n");
		return;
		}
		}
		/* Perhaps it is a software error. Try to reset */

		printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "device timeout, resetting\n");
		for (i = 0; i < mgp->num_slices; i++) {
		tx = &mgp->ss[i].tx;
		printk(KERN_INFO
		"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
		mgp->dev->name, i, tx->queue_active, tx->req,
		netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
		i, tx->queue_active, tx->req,
		tx->done, tx->pkt_start, tx->pkt_done,
		(int)ntohl(mgp->ss[i].fw_stats->
		send_done_count));
		msleep(2000);
		printk(KERN_INFO
		"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
		mgp->dev->name, i, tx->queue_active, tx->req,
		netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
		i, tx->queue_active, tx->req,
		tx->done, tx->pkt_start, tx->pkt_done,
		(int)ntohl(mgp->ss[i].fw_stats->
		send_done_count));
		@@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work)
		}
		status = myri10ge_load_firmware(mgp, 1);
		if (status != 0)
		printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
		mgp->dev->name);
		netdev_err(mgp->dev, "failed to load firmware\n");
		else
		myri10ge_open(mgp->dev);
		rtnl_unlock();
		@@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg)
		/* nic seems like it might be stuck.. */
		if (rx_pause_cnt != mgp->watchdog_pause) {
		if (net_ratelimit())
		printk(KERN_WARNING
		"myri10ge %s slice %d:"
		"TX paused, check link partner\n",
		mgp->dev->name, i);
		netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
		i);
		} else {
		printk(KERN_WARNING
		"myri10ge %s slice %d stuck:",
		mgp->dev->name, i);
		netdev_warn(mgp->dev, "slice %d stuck:", i);
		reset_needed = 1;
		}
		}
		@@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = {

		static __init int myri10ge_init_module(void)
		{
		printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
		MYRI10GE_VERSION_STR);
		pr_info("Version %s\n", MYRI10GE_VERSION_STR);

		if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
		printk(KERN_ERR
		"%s: Illegal rssh hash type %d, defaulting to source port\n",
		myri10ge_driver.name, myri10ge_rss_hash);
		pr_err("Illegal rssh hash type %d, defaulting to source port\n",
		myri10ge_rss_hash);
		myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
		}
		#ifdef CONFIG_MYRI10GE_DCA