Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 766e3721 authored by Scott Jiang's avatar Scott Jiang Committed by Mark Brown
Browse files

spi: convert spi-bfin-v3.c to a multiplatform driver 



Spi v3 controller is not only used on Blackfin. So rename it
and use ioread/iowrite api to make it work on other platform.

Signed-off-by: default avatarScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent c9eaa447

arch/blackfin/mach-bf609/boards/ezkit.c

+11 −11
Original line number Diff line number Diff line
@@ -20,7 +20,7 @@ 
#include <linux/pinctrl/machine.h>

#include <linux/pinctrl/pinconf-generic.h>

#include <linux/platform_data/pinctrl-adi2.h>

#include <asm/bfin_spi3.h>

#include <linux/spi/adi_spi3.h>

#include <asm/dma.h>

#include <asm/gpio.h>

#include <asm/nand.h>
@@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { 
	.type = "w25q32",

};



static struct bfin_spi3_chip spi_flash_chip_info = {

static struct adi_spi3_chip spi_flash_chip_info = {

	.enable_dma = true,         /* use dma transfer with this chip*/

};

#endif



#if IS_ENABLED(CONFIG_SPI_SPIDEV)

static struct bfin_spi3_chip spidev_chip_info = {

static struct adi_spi3_chip spidev_chip_info = {

	.enable_dma = true,

};

#endif
@@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif

};

#if IS_ENABLED(CONFIG_SPI_BFIN_V3)

#if IS_ENABLED(CONFIG_SPI_ADI_V3)

/* SPI (0) */

static struct resource bfin_spi0_resource[] = {

	{
@@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { 
};



/* SPI controller data */

static struct bfin_spi3_master bf60x_spi_master_info0 = {

static struct adi_spi3_master bf60x_spi_master_info0 = {

	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,

	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},

};



static struct platform_device bf60x_spi_master0 = {

	.name = "bfin-spi3",

	.name = "adi-spi3",

	.id = 0, /* Bus number */

	.num_resources = ARRAY_SIZE(bfin_spi0_resource),

	.resource = bfin_spi0_resource,
@@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { 
	},

};



static struct bfin_spi3_master bf60x_spi_master_info1 = {

static struct adi_spi3_master bf60x_spi_master_info1 = {

	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,

	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},

};



static struct platform_device bf60x_spi_master1 = {

	.name = "bfin-spi3",

	.name = "adi-spi3",

	.id = 1, /* Bus number */

	.num_resources = ARRAY_SIZE(bfin_spi1_resource),

	.resource = bfin_spi1_resource,
@@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { 
	&bfin_sdh_device,

#endif



#if IS_ENABLED(CONFIG_SPI_BFIN_V3)

#if IS_ENABLED(CONFIG_SPI_ADI_V3)

	&bf60x_spi_master0,

	&bf60x_spi_master1,

#endif
@@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { 
	PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1",  "pinctrl-adi2.0", NULL, "uart1"),

	PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0",  "pinctrl-adi2.0", NULL, "rsi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0",  "pinctrl-adi2.0", NULL, "eth0"),

	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0",  "pinctrl-adi2.0", NULL, "spi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1",  "pinctrl-adi2.0", NULL, "spi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0",  "pinctrl-adi2.0", NULL, "twi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1",  "pinctrl-adi2.0", NULL, "twi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),

drivers/spi/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -91,8 +91,8 @@ config SPI_BFIN5XX 
	help

	  This is the SPI controller master driver for Blackfin 5xx processor.



config SPI_BFIN_V3

	tristate "SPI controller v3 for Blackfin"

config SPI_ADI_V3

	tristate "SPI controller v3 for ADI"

	depends on BF60x

	help

	  This is the SPI controller v3 master driver

drivers/spi/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -18,7 +18,7 @@ obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o 
obj-$(CONFIG_SPI_BCM63XX)		+= spi-bcm63xx.o

obj-$(CONFIG_SPI_BCM63XX_HSSPI)		+= spi-bcm63xx-hsspi.o

obj-$(CONFIG_SPI_BFIN5XX)		+= spi-bfin5xx.o

obj-$(CONFIG_SPI_BFIN_V3)               += spi-bfin-v3.o

obj-$(CONFIG_SPI_ADI_V3)                += spi-adi-v3.o

obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o

obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o

obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o