Merge branch 'iommu-fixes-2.6.28' of... (73f56c0d) · Commits · e / devices / android_kernel_xiaomi_markw

Documentation/00-INDEX

+4 −40

Original line number	Diff line number	Diff line
		@@ -42,14 +42,8 @@ IRQ.txt
		- description of what an IRQ is.
		ManagementStyle
		- how to (attempt to) manage kernel hackers.
		MSI-HOWTO.txt
		- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
		RCU/
		- directory with info on RCU (read-copy update).
		README.DAC960
		- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
		README.cycladesZ
		- info on Cyclades-Z firmware loading.
		SAK.txt
		- info on Secure Attention Keys.
		SM501.txt
		@@ -86,20 +80,16 @@ blackfin/
		- directory with documentation for the Blackfin arch.
		block/
		- info on the Block I/O (BIO) layer.
		blockdev/
		- info on block devices & drivers
		cachetlb.txt
		- describes the cache/TLB flushing interfaces Linux uses.
		cciss.txt
		- info, major/minor #'s for Compaq's SMART Array Controllers.
		cdrom/
		- directory with information on the CD-ROM drivers that Linux has.
		computone.txt
		- info on Computone Intelliport II/Plus Multiport Serial Driver.
		connector/
		- docs on the netlink based userspace<->kernel space communication mod.
		console/
		- documentation on Linux console drivers.
		cpqarray.txt
		- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
		cpu-freq/
		- info on CPU frequency and voltage scaling.
		cpu-hotplug.txt
		@@ -126,8 +116,6 @@ device-mapper/
		- directory with info on Device Mapper.
		devices.txt
		- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
		digiepca.txt
		- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
		dontdiff
		- file containing a list of files that should never be diff'ed.
		driver-model/
		@@ -152,14 +140,10 @@ filesystems/
		- info on the vfs and the various filesystems that Linux supports.
		firmware_class/
		- request_firmware() hotplug interface info.
		floppy.txt
		- notes and driver options for the floppy disk driver.
		frv/
		- Fujitsu FR-V Linux documentation.
		gpio.txt
		- overview of GPIO (General Purpose Input/Output) access conventions.
		hayes-esp.txt
		- info on using the Hayes ESP serial driver.
		highuid.txt
		- notes on the change from 16 bit to 32 bit user/group IDs.
		timers/
		@@ -186,8 +170,6 @@ io_ordering.txt
		- info on ordering I/O writes to memory-mapped addresses.
		ioctl/
		- directory with documents describing various IOCTL calls.
		ioctl-number.txt
		- how to implement and register device/driver ioctl calls.
		iostats.txt
		- info on I/O statistics Linux kernel provides.
		irqflags-tracing.txt
		@@ -250,14 +232,10 @@ mips/
		- directory with info about Linux on MIPS architecture.
		mono.txt
		- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
		moxa-smartio
		- file with info on installing/using Moxa multiport serial driver.
		mutex-design.txt
		- info on the generic mutex subsystem.
		namespaces/
		- directory with various information about namespaces
		nbd.txt
		- info on a TCP implementation of a network block device.
		netlabel/
		- directory with information on the NetLabel subsystem.
		networking/
		@@ -270,8 +248,6 @@ numastat.txt
		- info on how to read Numa policy hit/miss statistics in sysfs.
		oops-tracing.txt
		- how to decode those nasty internal kernel error dump messages.
		paride.txt
		- information about the parallel port IDE subsystem.
		parisc/
		- directory with info on using Linux on PA-RISC architecture.
		parport.txt
		@@ -290,20 +266,16 @@ powerpc/
		- directory with info on using Linux with the PowerPC.
		preempt-locking.txt
		- info on locking under a preemptive kernel.
		printk-formats.txt
		- how to get printk format specifiers right
		prio_tree.txt
		- info on radix-priority-search-tree use for indexing vmas.
		ramdisk.txt
		- short guide on how to set up and use the RAM disk.
		rbtree.txt
		- info on what red-black trees are and what they are for.
		riscom8.txt
		- notes on using the RISCom/8 multi-port serial driver.
		robust-futex-ABI.txt
		- documentation of the robust futex ABI.
		robust-futexes.txt
		- a description of what robust futexes are.
		rocket.txt
		- info on the Comtrol RocketPort multiport serial driver.
		rt-mutex-design.txt
		- description of the RealTime mutex implementation design.
		rt-mutex.txt
		@@ -332,8 +304,6 @@ sparc/
		- directory with info on using Linux on Sparc architecture.
		sparse.txt
		- info on how to obtain and use the sparse tool for typechecking.
		specialix.txt
		- info on hardware/driver for specialix IO8+ multiport serial card.
		spi/
		- overview of Linux kernel Serial Peripheral Interface (SPI) support.
		spinlocks.txt
		@@ -342,14 +312,10 @@ stable_api_nonsense.txt
		- info on why the kernel does not have a stable in-kernel api or abi.
		stable_kernel_rules.txt
		- rules and procedures for the -stable kernel releases.
		stallion.txt
		- info on using the Stallion multiport serial driver.
		svga.txt
		- short guide on selecting video modes at boot via VGA BIOS.
		sysfs-rules.txt
		- How not to use sysfs.
		sx.txt
		- info on the Specialix SX/SI multiport serial driver.
		sysctl/
		- directory with info on the /proc/sys/* files.
		sysrq.txt
		@@ -358,8 +324,6 @@ telephony/
		- directory with info on telephony (e.g. voice over IP) support.
		time_interpolators.txt
		- info on time interpolators.
		tty.txt
		- guide to the locking policies of the tty layer.
		uml/
		- directory with information about User Mode Linux.
		unicode.txt

Documentation/ABI/testing/sysfs-c2port

0 → 100644

+88 −0

Original line number	Diff line number	Diff line
		What: /sys/class/c2port/
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/ directory will contain files and
		directories that will provide a unified interface to
		the C2 port interface.

		What: /sys/class/c2port/c2portX
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/ directory is related to X-th
		C2 port into the system. Each directory will contain files to
		manage and control its C2 port.

		What: /sys/class/c2port/c2portX/access
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/access file enable the access
		to the C2 port from the system. No commands can be sent
		till this entry is set to 0.

		What: /sys/class/c2port/c2portX/dev_id
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/dev_id file show the device ID
		of the connected micro.

		What: /sys/class/c2port/c2portX/flash_access
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_access file enable the
		access to the on-board flash of the connected micro.
		No commands can be sent till this entry is set to 0.

		What: /sys/class/c2port/c2portX/flash_block_size
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_block_size file show
		the on-board flash block size of the connected micro.

		What: /sys/class/c2port/c2portX/flash_blocks_num
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_blocks_num file show
		the on-board flash blocks number of the connected micro.

		What: /sys/class/c2port/c2portX/flash_data
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_data file export
		the content of the on-board flash of the connected micro.

		What: /sys/class/c2port/c2portX/flash_erase
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_erase file execute
		the "erase" command on the on-board flash of the connected
		micro.

		What: /sys/class/c2port/c2portX/flash_erase
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/flash_erase file show the
		on-board flash size of the connected micro.

		What: /sys/class/c2port/c2portX/reset
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/reset file execute a "reset"
		command on the connected micro.

		What: /sys/class/c2port/c2portX/rev_id
		Date: October 2008
		Contact: Rodolfo Giometti <giometti@linux.it>
		Description:
		The /sys/class/c2port/c2portX/rev_id file show the revision ID
		of the connected micro.

Documentation/ABI/testing/sysfs-firmware-acpi

+8 −8

Original line number	Diff line number	Diff line
		@@ -89,7 +89,7 @@ Description:

		error - an interrupt that can't be accounted for above.

		invalid: it's either a wakeup GPE or a GPE/Fixed Event that
		invalid: it's either a GPE or a Fixed Event that
		doesn't have an event handler.

		disable: the GPE/Fixed Event is valid but disabled.
		@@ -117,30 +117,30 @@ Description:
		and other user space applications so that the machine won't shutdown
		when pressing the power button.
		# cat ff_pwr_btn
		0
		0 enabled
		# press the power button for 3 times;
		# cat ff_pwr_btn
		3
		3 enabled
		# echo disable > ff_pwr_btn
		# cat ff_pwr_btn
		disable
		3 disabled
		# press the power button for 3 times;
		# cat ff_pwr_btn
		disable
		3 disabled
		# echo enable > ff_pwr_btn
		# cat ff_pwr_btn
		4
		4 enabled
		/*
		* this is because the status bit is set even if the enable bit is cleared,
		* and it triggers an ACPI fixed event when the enable bit is set again
		*/
		# press the power button for 3 times;
		# cat ff_pwr_btn
		7
		7 enabled
		# echo disable > ff_pwr_btn
		# press the power button for 3 times;
		# echo clear > ff_pwr_btn /* clear the status bit */
		# echo disable > ff_pwr_btn
		# cat ff_pwr_btn
		7
		7 enabled

Documentation/PCI/00-INDEX

+2 −0

Original line number	Diff line number	Diff line
		00-INDEX
		- this file
		MSI-HOWTO.txt
		- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
		PCI-DMA-mapping.txt
		- info for PCI drivers using DMA portably across all platforms
		PCIEBUS-HOWTO.txt

Documentation/MSI-HOWTO.txt→Documentation/PCI/MSI-HOWTO.txt

+0 −0

File moved.

View file