Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 722ffbf2 authored by Ashish Garg's avatar Ashish Garg Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: add support for AUO AMOLED 400p cmd panel 



Add the DT properties related to panel parameters such as resolution
details, timing information, initialization sequence, etc., to support
AUO AMOLED 400p command mode panel.

Change-Id: Iec04f50eba3d0a54aeb7b67a13976143a52648a1
Signed-off-by: default avatarAshish Garg <ashigarg@codeaurora.org>
parent cb28f846

arch/arm/boot/dts/qcom/dsi-panel-auo-400p-cmd.dtsi

0 → 100644
+88 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_auo_400p_cmd: qcom,mdss_dsi_auo_400p_cmd {

		qcom,mdss-dsi-panel-name = "AUO 400p command mode dsi panel";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <400>;

		qcom,mdss-dsi-panel-height = <400>;

		qcom,mdss-pan-physical-height-dimension = <29>;

		qcom,mdss-pan-physical-width-dimension = <29>;

		qcom,mdss-dsi-h-front-porch = <4>;

		qcom,mdss-dsi-h-back-porch = <4>;

		qcom,mdss-dsi-h-pulse-width = <4>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <8>;

		qcom,mdss-dsi-v-front-porch = <8>;

		qcom,mdss-dsi-v-pulse-width = <8>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-on-command = [

			15 01 00 00 00 00 02 FE 05

			15 01 00 00 00 00 02 05 00

			15 01 00 00 00 00 02 FE 07

			15 01 00 00 00 00 02 07 6D

			15 01 00 00 00 00 02 FE 0A

			15 01 00 00 00 00 02 1C 1B

			15 01 00 00 00 00 02 FE 00

			15 01 00 00 00 00 02 35 00

			05 01 00 00 00 00 02 11 00

			32 01 00 00 FF 00 02 00 00

			05 01 00 00 00 00 02 29 00

			];

		qcom,mdss-dsi-off-command = [

					05 01 00 00 00 00 02 28 00

					05 01 00 00 78 00 02 10 00

					];

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-idle-on-command = [

			05 01 00 00 00 00 01 39 /* Idle-Mode On */

			];

		qcom,mdss-dsi-idle-on-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-idle-off-command = [

			05 01 00 00 00 00 01 38 /* Idle-Mode Off  */

			];

		qcom,mdss-dsi-idle-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-idle-fps = <15>;

		qcom,mdss-dsi-traffic-mode = "burst_mode";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-panel-timings = [

			5F 12 0A 00 32 34 10 16 0F 03 04 00

			];

		qcom,mdss-dsi-t-clk-post = <0x05>;

		qcom,mdss-dsi-t-clk-pre = <0x11>;

		qcom,mdss-dsi-bl-min-level = <1>;

		qcom,mdss-dsi-bl-max-level = <255>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>;

	};

};

arch/arm/boot/dts/qcom/msm8909-mdss-panels.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -23,6 +23,7 @@ 
#include "dsi-panel-auo-qvga-cmd.dtsi"

#include "dsi-panel-auo-cx-qvga-cmd.dtsi"

#include "dsi-panel-390p-auo-cmd.dtsi"

#include "dsi-panel-auo-400p-cmd.dtsi"



&soc {

	dsi_panel_pwr_supply: dsi_panel_pwr_supply {

arch/arm/boot/dts/qcom/msm8909-mtp.dtsi

+7 −0
Original line number Diff line number Diff line
@@ -429,6 +429,13 @@ 
	qcom,mdss-pref-prim-intf = "dsi";

};



&dsi_auo_400p_cmd {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-pmic-pwm-frequency = <100>;

	qcom,mdss-dsi-bl-pmic-bank-select = <0>;

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

};



&dsi_auo_cx_qvga_cmd {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-pmic-pwm-frequency = <100>;