Merge branch 'for-linus' into for-3.18/core

  <http://www.kroah.com/log/linux/maintainer-03.html>

  <http://www.kroah.com/log/linux/maintainer-04.html>

  <http://www.kroah.com/log/linux/maintainer-05.html>

  <http://www.kroah.com/log/linux/maintainer-06.html>

NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!

  <https://lkml.org/lkml/2005/7/11/336>

* DMA client

Required properties:

- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,

		where SRS/DRS values are fixed handles, specified in the SoC

		manual as the value that would be written into the PDMACHCR.

- dmas:		a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.

		where SRS/DRS are specified in the SoC manual.

		It will be written into PDMACHCR as high 16-bit parts.

- dma-names:	a list of DMA channel names, one per "dmas" entry

Example:

Optional properties for main touchpad device:

- linux,gpio-keymap: An array of up to 4 entries indicating the Linux

    keycode generated by each GPIO. Linux keycodes are defined in

- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages

    on GPIO bit changes. An array of up to 8 entries can be provided

    indicating the Linux keycode mapped to each bit of the status byte,

    starting at the LSB. Linux keycodes are defined in

    <dt-bindings/input/input.h>.

    Note: the numbering of the GPIOs and the bit they start at varies between

    maXTouch devices. You must either refer to the documentation, or

    experiment to determine which bit corresponds to which input. Use

    KEY_RESERVED for unused padding values.

Example:

	touch@4b {

  further clocks may be specified in derived bindings.

- clock-names: One name for each entry in the clocks property, the

  first one should be "stmmaceth".

- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is

  available this clock is used for programming the Timestamp Addend Register.

  If not passed then the system clock will be used and this is fine on some

  platforms.

Examples:

		infet5-supply = <&some_reg>;

		infet6-supply = <&some_reg>;

		infet7-supply = <&some_reg>;

		vsys_l1-supply = <&some_reg>;

		vsys_l2-supply = <&some_reg>;

		vsys-l1-supply = <&some_reg>;

		vsys-l2-supply = <&some_reg>;

		regulators {

			dcdc1 {