Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 66e171a3 authored by Panduranga Mallireddy's avatar Panduranga Mallireddy Committed by Tony Lindgren
Browse files

omap: panda: wlan board muxing 



Add board muxing to support the wlan wl1271 chip that is
hardwired to mmc5 (fifth mmc controller) on the PANDA.

Based on the wlan board muxing for zoom3 by Ohad Ben-Cohen
<ohadb@ti.com>
Signed-off-by: default avatarPanduranga Mallireddy <panduranga_mallireddy@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d3f02fc3

arch/arm/mach-omap2/board-omap4panda.c

+13 −0
Original line number Diff line number Diff line
@@ -387,6 +387,19 @@ static int __init omap4_panda_i2c_init(void) 


#ifdef CONFIG_OMAP_MUX

static struct omap_board_mux board_mux[] __initdata = {

	/* WLAN IRQ - GPIO 53 */

	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),

	/* WLAN POWER ENABLE - GPIO 43 */

	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),

	/* WLAN SDIO: MMC5 CMD */

	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	/* WLAN SDIO: MMC5 CLK */

	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	/* WLAN SDIO: MMC5 DAT[0-3] */

	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),

	{ .reg_offset = OMAP_MUX_TERMINATOR },

};

#else