Loading drivers/regulator/Kconfig +169 −130 Original line number Diff line number Diff line Loading @@ -74,13 +74,72 @@ config REGULATOR_GPIO and the platform has to provide a mapping of GPIO-states to target volts/amps. config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable charging select between 100 mA and 500 mA charging current limit. This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog Semiconductor DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_ANATOP help Say y here to support Freescale i.MX on-chip ANATOP LDOs regulators. It is recommended that this option be enabled on i.MX6 platform. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 PMIC. config REGULATOR_MC13892 tristate "Freescale MC13892 regulator driver" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C help This driver supports ISL6271A voltage regulator chip. config REGULATOR_88PM8607 bool "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y help This driver supports 88PM8607 voltage regulator chips. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" Loading Loading @@ -136,61 +195,12 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_WM831X tristate "Wolfson Microelcronics WM831x PMIC regulators" depends on MFD_WM831X help Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help This driver provides support for the voltage regulators on the WM8994 CODEC. config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 PCAP2 PMIC. config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" Loading @@ -206,31 +216,20 @@ config REGULATOR_LP3972 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC config REGULATOR_PCAP tristate "PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the PCAP2 PMIC. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Support regulators on Freescale MC13783 PMIC" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" depends on MFD_PCF50633 help Say y here to support the regulators found on the Freescale MC13783 PMIC. Say Y here to support the voltage regulators and convertors on PCF50633 config REGULATOR_MC13892 tristate "Support regulators on Freescale MC13892 PMIC" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" depends on MFD_S5M_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. This driver supports a Samsung S5M8767A voltage output regulator via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. config REGULATOR_AB3100 tristate "ST-Ericsson AB3100 Regulator functions" Loading @@ -241,6 +240,32 @@ config REGULATOR_AB3100 AB3100 analog baseband dealing with power regulators for the system. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC config REGULATOR_DBX500_PRCMU bool config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU select REGULATOR_DBX500_PRCMU help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable charging select between 100 mA and 500 mA charging current limit. config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X Loading @@ -250,6 +275,16 @@ config REGULATOR_TPS6105X It is a single boost converter primarily for white LEDs and audio amplifiers. config REGULATOR_TPS62360 tristate "TI TPS62360 Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS62360 voltage regulator chip. This regulator is meant for processor core supply. This chip is high-frequency synchronous step down dc-dc converter optimized for battery-powered portable applications. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C Loading @@ -267,73 +302,77 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" depends on MFD_TPS65217 help This driver supports TPS65912 voltage regulator chip. This driver supports TPS65217 voltage regulator chips. TPS65217 provides three step-down converters and four general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_88PM8607 bool "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI help This driver supports 88PM8607 voltage regulator chips. This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X help This driver supports ISL6271A voltage regulator chip. This driver supports TPS6586X voltage regulator chips. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C config REGULATOR_TPS65910 tristate "TI TPS65910/TPS65911 Power Regulators" depends on MFD_TPS65910 help This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. This driver supports TPS65910/TPS65911 voltage regulator chips. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC This driver supports TPS65912 voltage regulator chip. config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X help This driver supports TPS6586X voltage regulator chips. Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_TPS65910 tristate "TI TPS65910 Power Regulator" depends on MFD_TPS65910 config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 help This driver supports TPS65910 voltage regulator chips. This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. This driver provides support for the voltage regulators on the WM8994 CODEC. endif drivers/regulator/Makefile +25 −19 Original line number Diff line number Diff line Loading @@ -10,43 +10,49 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG drivers/regulator/aat2870-regulator.c +7 −7 Original line number Diff line number Diff line Loading @@ -31,7 +31,7 @@ #include <linux/mfd/aat2870.h> struct aat2870_regulator { struct platform_device *pdev; struct aat2870_data *aat2870; struct regulator_desc desc; const int *voltages; /* uV */ Loading Loading @@ -60,7 +60,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask, selector << ri->voltage_shift); Loading @@ -69,7 +69,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev, static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; u8 val; int ret; Loading @@ -83,7 +83,7 @@ static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev) static int aat2870_ldo_enable(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, ri->enable_mask); Loading @@ -92,7 +92,7 @@ static int aat2870_ldo_enable(struct regulator_dev *rdev) static int aat2870_ldo_disable(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, 0); } Loading @@ -100,7 +100,7 @@ static int aat2870_ldo_disable(struct regulator_dev *rdev) static int aat2870_ldo_is_enabled(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; u8 val; int ret; Loading Loading @@ -185,7 +185,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id); return -EINVAL; } ri->pdev = pdev; ri->aat2870 = dev_get_drvdata(pdev->dev.parent); rdev = regulator_register(&ri->desc, &pdev->dev, pdev->dev.platform_data, ri, NULL); Loading drivers/regulator/ab8500.c +4 −6 Original line number Diff line number Diff line Loading @@ -201,7 +201,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector) return info->voltages[selector]; } static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev) { int ret, val; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); Loading Loading @@ -229,11 +229,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) /* vintcore has a different layout */ val = regval & info->voltage_mask; if (info->desc.id == AB8500_LDO_INTCORE) ret = info->voltages[val >> 0x3]; return val >> 0x3; else ret = info->voltages[val]; return ret; return val; } static int ab8500_get_best_voltage_index(struct regulator_dev *rdev, Loading Loading @@ -320,7 +318,7 @@ static struct regulator_ops ab8500_regulator_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, .get_voltage = ab8500_regulator_get_voltage, .get_voltage_sel = ab8500_regulator_get_voltage_sel, .set_voltage = ab8500_regulator_set_voltage, .list_voltage = ab8500_list_voltage, .enable_time = ab8500_regulator_enable_time, Loading drivers/regulator/ad5398.c +2 −2 Original line number Diff line number Diff line Loading @@ -94,8 +94,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int if (max_uA > chip->max_uA || max_uA < chip->min_uA) return -EINVAL; selector = ((min_uA - chip->min_uA) * chip->current_level + range_uA - 1) / range_uA; selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level, range_uA); if (ad5398_calc_current(chip, selector) > max_uA) return -EINVAL; Loading Loading
drivers/regulator/Kconfig +169 −130 Original line number Diff line number Diff line Loading @@ -74,13 +74,72 @@ config REGULATOR_GPIO and the platform has to provide a mapping of GPIO-states to target volts/amps. config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable charging select between 100 mA and 500 mA charging current limit. This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog Semiconductor DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_ANATOP help Say y here to support Freescale i.MX on-chip ANATOP LDOs regulators. It is recommended that this option be enabled on i.MX6 platform. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 PMIC. config REGULATOR_MC13892 tristate "Freescale MC13892 regulator driver" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C help This driver supports ISL6271A voltage regulator chip. config REGULATOR_88PM8607 bool "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y help This driver supports 88PM8607 voltage regulator chips. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" Loading Loading @@ -136,61 +195,12 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_WM831X tristate "Wolfson Microelcronics WM831x PMIC regulators" depends on MFD_WM831X help Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help This driver provides support for the voltage regulators on the WM8994 CODEC. config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 PCAP2 PMIC. config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" Loading @@ -206,31 +216,20 @@ config REGULATOR_LP3972 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC config REGULATOR_PCAP tristate "PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the PCAP2 PMIC. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Support regulators on Freescale MC13783 PMIC" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" depends on MFD_PCF50633 help Say y here to support the regulators found on the Freescale MC13783 PMIC. Say Y here to support the voltage regulators and convertors on PCF50633 config REGULATOR_MC13892 tristate "Support regulators on Freescale MC13892 PMIC" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" depends on MFD_S5M_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. This driver supports a Samsung S5M8767A voltage output regulator via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. config REGULATOR_AB3100 tristate "ST-Ericsson AB3100 Regulator functions" Loading @@ -241,6 +240,32 @@ config REGULATOR_AB3100 AB3100 analog baseband dealing with power regulators for the system. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC config REGULATOR_DBX500_PRCMU bool config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU select REGULATOR_DBX500_PRCMU help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable charging select between 100 mA and 500 mA charging current limit. config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X Loading @@ -250,6 +275,16 @@ config REGULATOR_TPS6105X It is a single boost converter primarily for white LEDs and audio amplifiers. config REGULATOR_TPS62360 tristate "TI TPS62360 Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS62360 voltage regulator chip. This regulator is meant for processor core supply. This chip is high-frequency synchronous step down dc-dc converter optimized for battery-powered portable applications. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C Loading @@ -267,73 +302,77 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" depends on MFD_TPS65217 help This driver supports TPS65912 voltage regulator chip. This driver supports TPS65217 voltage regulator chips. TPS65217 provides three step-down converters and four general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_88PM8607 bool "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI help This driver supports 88PM8607 voltage regulator chips. This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X help This driver supports ISL6271A voltage regulator chip. This driver supports TPS6586X voltage regulator chips. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C config REGULATOR_TPS65910 tristate "TI TPS65910/TPS65911 Power Regulators" depends on MFD_TPS65910 help This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. This driver supports TPS65910/TPS65911 voltage regulator chips. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC This driver supports TPS65912 voltage regulator chip. config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X help This driver supports TPS6586X voltage regulator chips. Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_TPS65910 tristate "TI TPS65910 Power Regulator" depends on MFD_TPS65910 config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 help This driver supports TPS65910 voltage regulator chips. This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. This driver provides support for the voltage regulators on the WM8994 CODEC. endif
drivers/regulator/Makefile +25 −19 Original line number Diff line number Diff line Loading @@ -10,43 +10,49 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
drivers/regulator/aat2870-regulator.c +7 −7 Original line number Diff line number Diff line Loading @@ -31,7 +31,7 @@ #include <linux/mfd/aat2870.h> struct aat2870_regulator { struct platform_device *pdev; struct aat2870_data *aat2870; struct regulator_desc desc; const int *voltages; /* uV */ Loading Loading @@ -60,7 +60,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask, selector << ri->voltage_shift); Loading @@ -69,7 +69,7 @@ static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev, static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; u8 val; int ret; Loading @@ -83,7 +83,7 @@ static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev) static int aat2870_ldo_enable(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, ri->enable_mask); Loading @@ -92,7 +92,7 @@ static int aat2870_ldo_enable(struct regulator_dev *rdev) static int aat2870_ldo_disable(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, 0); } Loading @@ -100,7 +100,7 @@ static int aat2870_ldo_disable(struct regulator_dev *rdev) static int aat2870_ldo_is_enabled(struct regulator_dev *rdev) { struct aat2870_regulator *ri = rdev_get_drvdata(rdev); struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent); struct aat2870_data *aat2870 = ri->aat2870; u8 val; int ret; Loading Loading @@ -185,7 +185,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id); return -EINVAL; } ri->pdev = pdev; ri->aat2870 = dev_get_drvdata(pdev->dev.parent); rdev = regulator_register(&ri->desc, &pdev->dev, pdev->dev.platform_data, ri, NULL); Loading
drivers/regulator/ab8500.c +4 −6 Original line number Diff line number Diff line Loading @@ -201,7 +201,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector) return info->voltages[selector]; } static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev) { int ret, val; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); Loading Loading @@ -229,11 +229,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev) /* vintcore has a different layout */ val = regval & info->voltage_mask; if (info->desc.id == AB8500_LDO_INTCORE) ret = info->voltages[val >> 0x3]; return val >> 0x3; else ret = info->voltages[val]; return ret; return val; } static int ab8500_get_best_voltage_index(struct regulator_dev *rdev, Loading Loading @@ -320,7 +318,7 @@ static struct regulator_ops ab8500_regulator_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, .get_voltage = ab8500_regulator_get_voltage, .get_voltage_sel = ab8500_regulator_get_voltage_sel, .set_voltage = ab8500_regulator_set_voltage, .list_voltage = ab8500_list_voltage, .enable_time = ab8500_regulator_enable_time, Loading
drivers/regulator/ad5398.c +2 −2 Original line number Diff line number Diff line Loading @@ -94,8 +94,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int if (max_uA > chip->max_uA || max_uA < chip->min_uA) return -EINVAL; selector = ((min_uA - chip->min_uA) * chip->current_level + range_uA - 1) / range_uA; selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level, range_uA); if (ad5398_calc_current(chip, selector) > max_uA) return -EINVAL; Loading
