Merge "ARM: dts: apq: Configure GPIOs for DragonBoard-8096" (62c3481f) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/apq8096-dragonboard.dtsi

+44 −12

Original line number	Diff line number	Diff line
		@@ -427,6 +427,26 @@
		};

		&pm8994_mpps {
		mpp@a100 { /* MPP 2 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		qcom,invert = <0>;
		status = "okay";
		};

		mpp@a200 { /* MPP 3 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		qcom,invert = <0>;
		status = "okay";
		};

		mpp@a300 { /* MPP 4 */
		/* HDMI_5v_vreg regulator enable */
		qcom,mode = <1>; /* Digital output */
		@@ -437,6 +457,16 @@
		qcom,invert = <0>;
		status = "okay";
		};

		mpp@a500 { /* MPP 6 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		qcom,invert = <0>;
		status = "okay";
		};
		};


		@@ -604,6 +634,10 @@
		interrupt-names = "vbus_det_irq";
		vin-supply = <&vph_pwr_vreg>;
		};

		spi@7575000 { /* BLSP1 QUP1 */
		status = "disabled";
		};
		};

		&spmi_bus {
		@@ -642,11 +676,10 @@
		status = "okay";
		};

		gpio@c600 { /* GPIO 7 - NFC_PWR_REQ */
		qcom,mode = <0>; /* DIGITAL IN */
		qcom,pull = <5>; /* No Pull */
		gpio@c600 { /* GPIO 7 */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,src-sel = <0>; /* GPIO */
		qcom,master-en = <1>; /* ENABLE GPIO */
		status = "okay";
		};
		@@ -661,11 +694,10 @@
		status = "okay";
		};

		gpio@c900 { /* GPIO 10 - NFC_CLK_REQ */
		qcom,mode = <0>; /* DIGITAL IN */
		qcom,pull = <5>; /* No Pull */
		gpio@c900 { /* GPIO 10 */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
		qcom,src-sel = <0>; /* GPIO */
		qcom,master-en = <1>; /* ENABLE GPIO */
		status = "okay";
		};
		@@ -680,10 +712,10 @@
		};

		gpio@cc00 { /* GPIO 13 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* GPIO */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};