Loading arch/arm/boot/dts/qcom/apq8096-v3-drone.dts +77 −0 Original line number Diff line number Diff line Loading @@ -15,6 +15,7 @@ #include "apq8096-v3.dtsi" #include "apq8096-drone.dtsi" #include "msm8996-wsa881x.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8096v3 + PM8996&PMI8996 Drone"; Loading Loading @@ -244,3 +245,79 @@ no-map; reg = <0 0x8ea00000 0 0x3200000>; }; &slim_msm { status = "ok"; tasha_codec { status = "ok"; }; }; &wsa881x_211 { qcom,spkr-sd-n-gpio = <&tlmm 114 0>; }; &wsa881x_212 { qcom,spkr-sd-n-gpio = <&tlmm 91 0>; }; &wsa881x_213 { qcom,spkr-sd-n-gpio = <&tlmm 114 0>; }; &wsa881x_214 { qcom,spkr-sd-n-gpio = <&tlmm 91 0>; }; &soc { qcom,msm-dai-mi2s { status = "ok"; }; sound-9335 { status = "ok"; qcom,audio-routing = "AIF4 VI", "MCLK", "RX_BIAS", "MCLK", "MADINPUT", "MCLK", "AMIC1", "MIC BIAS1", "MIC BIAS1", "Handset Mic", "AMIC2", "MIC BIAS3", "MIC BIAS3", "Headset Mic", "AMIC3", "MIC BIAS1", "MIC BIAS1", "ANCRight Headset Mic", "AMIC4", "MIC BIAS3", "MIC BIAS3", "ANCLeft Headset Mic", "AMIC5", "MIC BIAS4", "MIC BIAS4", "Handset Mic", "AMIC6", "MIC BIAS4", "MIC BIAS4", "Analog Mic6", "DMIC0", "MIC BIAS1", "MIC BIAS1", "Digital Mic0", "DMIC1", "MIC BIAS1", "MIC BIAS1", "Digital Mic1", "DMIC2", "MIC BIAS3", "MIC BIAS3", "Digital Mic2", "DMIC3", "MIC BIAS3", "MIC BIAS3", "Digital Mic3", "DMIC4", "MIC BIAS4", "MIC BIAS4", "Digital Mic4", "DMIC5", "MIC BIAS4", "MIC BIAS4", "Digital Mic5", "SpkrLeft IN", "SPK1 OUT", "SpkrRight IN", "SPK2 OUT"; qcom,wsa-max-devs = <2>; qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>, <&wsa881x_213>, <&wsa881x_214>; qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight", "SpkrLeft", "SpkrRight"; }; }; &wcd9xxx_intc { qcom,gpio-connect = <&tlmm 127 0>; pinctrl-0 = <&wcd_intr_default2>; }; arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi +15 −1 Original line number Diff line number Diff line /* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. /* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading Loading @@ -1440,6 +1440,20 @@ input-enable; }; }; wcd_intr_default2: wcd_intr_default2{ mux { pins = "gpio127"; function = "gpio"; }; config { pins = "gpio127"; drive-strength = <2>; /* 2 mA */ bias-pull-down; /* pull down */ input-enable; }; }; }; cdc_reset_ctrl { Loading Loading
arch/arm/boot/dts/qcom/apq8096-v3-drone.dts +77 −0 Original line number Diff line number Diff line Loading @@ -15,6 +15,7 @@ #include "apq8096-v3.dtsi" #include "apq8096-drone.dtsi" #include "msm8996-wsa881x.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8096v3 + PM8996&PMI8996 Drone"; Loading Loading @@ -244,3 +245,79 @@ no-map; reg = <0 0x8ea00000 0 0x3200000>; }; &slim_msm { status = "ok"; tasha_codec { status = "ok"; }; }; &wsa881x_211 { qcom,spkr-sd-n-gpio = <&tlmm 114 0>; }; &wsa881x_212 { qcom,spkr-sd-n-gpio = <&tlmm 91 0>; }; &wsa881x_213 { qcom,spkr-sd-n-gpio = <&tlmm 114 0>; }; &wsa881x_214 { qcom,spkr-sd-n-gpio = <&tlmm 91 0>; }; &soc { qcom,msm-dai-mi2s { status = "ok"; }; sound-9335 { status = "ok"; qcom,audio-routing = "AIF4 VI", "MCLK", "RX_BIAS", "MCLK", "MADINPUT", "MCLK", "AMIC1", "MIC BIAS1", "MIC BIAS1", "Handset Mic", "AMIC2", "MIC BIAS3", "MIC BIAS3", "Headset Mic", "AMIC3", "MIC BIAS1", "MIC BIAS1", "ANCRight Headset Mic", "AMIC4", "MIC BIAS3", "MIC BIAS3", "ANCLeft Headset Mic", "AMIC5", "MIC BIAS4", "MIC BIAS4", "Handset Mic", "AMIC6", "MIC BIAS4", "MIC BIAS4", "Analog Mic6", "DMIC0", "MIC BIAS1", "MIC BIAS1", "Digital Mic0", "DMIC1", "MIC BIAS1", "MIC BIAS1", "Digital Mic1", "DMIC2", "MIC BIAS3", "MIC BIAS3", "Digital Mic2", "DMIC3", "MIC BIAS3", "MIC BIAS3", "Digital Mic3", "DMIC4", "MIC BIAS4", "MIC BIAS4", "Digital Mic4", "DMIC5", "MIC BIAS4", "MIC BIAS4", "Digital Mic5", "SpkrLeft IN", "SPK1 OUT", "SpkrRight IN", "SPK2 OUT"; qcom,wsa-max-devs = <2>; qcom,wsa-devs = <&wsa881x_211>, <&wsa881x_212>, <&wsa881x_213>, <&wsa881x_214>; qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight", "SpkrLeft", "SpkrRight"; }; }; &wcd9xxx_intc { qcom,gpio-connect = <&tlmm 127 0>; pinctrl-0 = <&wcd_intr_default2>; };
arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi +15 −1 Original line number Diff line number Diff line /* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. /* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading Loading @@ -1440,6 +1440,20 @@ input-enable; }; }; wcd_intr_default2: wcd_intr_default2{ mux { pins = "gpio127"; function = "gpio"; }; config { pins = "gpio127"; drive-strength = <2>; /* 2 mA */ bias-pull-down; /* pull down */ input-enable; }; }; }; cdc_reset_ctrl { Loading