ARM: dts: msm: add dtsi for JDI's incell panel

/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/*---------------------------------------------------------------------------

 * This file is autogenerated file using gcdb parser. Please do not edit it.

 * Update input XML file to add a new entry or update variable in this file

 * VERSION = "1.0"

 *---------------------------------------------------------------------------*/

&mdss_mdp {

	dsi_jdi_fhd_video: qcom,mdss_dsi_jdi_fhd_video {

		qcom,mdss-dsi-panel-name =

				"jdi fhd 6inch A155A video mode dsi panel";

		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-panel-framerate = <56>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <1080>;

		qcom,mdss-dsi-panel-height = <1920>;

		qcom,mdss-dsi-h-front-porch = <12>;

		qcom,mdss-dsi-h-back-porch = <28>;

		qcom,mdss-dsi-h-pulse-width = <4>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <3>;

		qcom,mdss-dsi-v-front-porch = <18>;

		qcom,mdss-dsi-v-pulse-width = <1>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-panel-operating-mode = <1>;

		qcom,mdss-dsi-on-command = [13 01 00 00 0a 00 02 FF F0

				13 01 00 00 0a 00 02 DD 02

				13 01 00 00 0a 00 02 E3 00

				13 01 00 00 0a 00 02 FB 01

				13 01 00 00 0a 00 02 FF 00

				15 01 00 00 0a 00 02 35 00

				15 01 00 00 0a 00 02 51 FF

				15 01 00 00 0a 00 02 53 2C

				13 01 00 00 0a 00 02 FF 26

				13 01 00 00 0a 00 02 02 FF

				13 01 00 00 0a 00 02 FF 10

				13 01 00 00 0a 00 02 BB 13

				13 01 00 00 0a 00 02 FF 00

				05 01 00 00 C8 00 01 11

				05 01 00 00 28 00 01 29];

		qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00

				 05 01 00 00 78 00 02 10 00];

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "burst_mode";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-panel-timings =

					[ce 2e 1e 00 5a 5c 24 30 24 03 04 00];

		qcom,mdss-dsi-t-clk-post = <0x0a>;

		qcom,mdss-dsi-t-clk-pre = <0x2c>;

		qcom,mdss-dsi-bl-min-level = <1>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

		qcom,mdss-dsi-reset-sequence = <1 20>, <0 200>, <1 20>;

	};

};