Merge "ARM: dts: msm: Add charger and gpio nodes for mdm9640-v2-mtp"

	qcom,ipa-hw-mode = <1>; /* IPA hw type = Virtual */

};

&i2c_3 {

	smb1357_otg_supply: smb1357-charger@1c {

		compatible = "qcom,smb1357-charger";

		reg = <0x1c>;

		interrupt-parent = <&tlmm_pinmux>;

		interrupts = <83 0>;    /* MDM GPIO 83 */

		qcom,float-voltage-mv = <4200>;

		qcom,charging-timeout = <1536>;

		qcom,recharge-thresh-mv = <200>;

		qcom,iterm-ma = <100>;

		regulator-name = "smb1357_otg_supply";

		pinctrl-names = "default";

		pinctrl-0 = <&pmx_smb_stat_active>;

		qcom,id-line-not-connected;

		qcom,bmd-algo-disabled;

	};

};

&pmd9635_gpios {

	gpio@c000 { /* GPIO 1 */

	};

	gpio@c100 { /* GPIO 2 */

		qcom,mode = <1>;               /* Digital output */

		qcom,output-type = <0>;        /* CMOS logic */

		qcom,invert = <0>;             /* no inversion */

		qcom,vin-sel = <2>;            /* VIN 2 */

		qcom,src-sel = <2>;            /* Function 2 */

		qcom,out-strength = <2>;       /* Medium */

		qcom,master-en = <1>;          /* Enable GPIO */

		status = "ok";

	};

	gpio@c200 { /* GPIO 3 */

	};

	gpio@c300 { /* GPIO 4 */

		status = "ok";

		qcom,mode = <0>;	/* Digital input */

		qcom,pull = <1>;	/* Pull up 1.5 uA */

		qcom,vin-sel = <2>;	/* PMD9635 LDO 6 = 1.8 V */

		qcom,master-en = <1>;	/* Enable GPIO */

	};

	gpio@c400 { /* GPIO 5 */

	};

	gpio@c500 { /* GPIO 6 */

		qcom,mode = <1>;         /* Digital output*/

		qcom,pull = <4>;         /* Pulldown 10uA */

		qcom,vin-sel = <2>;      /* VIN2 */

		qcom,src-sel = <0>;      /* GPIO */

		qcom,invert = <0>;       /* Invert */

		qcom,master-en = <1>;    /* Enable GPIO */

		status = "ok";

	};

};

&qnand_1 {

	status = "ok";

};

&usb3 {

	vbus_dwc3-supply = <&smb1357_otg_supply>;

	qcom,cpe-gpio = <&tlmm_pinmux 87 0>;

};