Merge "ARM: dts: msm: Configure WOL interrupt for EMAC on mdm9607" (577d68a3) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/mdm9607-pinctrl.dtsi

+0 −30

Original line number	Diff line number	Diff line
		@@ -727,36 +727,6 @@
		};
		};

		emac0_irq_active: emac0_irq_active {
		/* active state */
		mux {
		/* ETH IRQ */
		pins = "gpio30";
		function = "gpio";
		};

		config {
		pins = "gpio30";
		drive-strength = <16>; /* 16 MA */
		bias-pull-up;
		};
		};

		emac0_irq_sleep: emac0_irq_sleep {
		/* suspended state */
		mux {
		/* ETH IRQ */
		pins = "gpio30";
		function = "gpio";
		};

		config {
		pins = "gpio30";
		drive-strength = <2>; /* 2 MA */
		bias-pull-down;
		};
		};

		emac0_rst_active: emac0_rst_active {
		/* active state */
		mux {

+13 −4

Original line number	Diff line number	Diff line
		@@ -1262,8 +1262,17 @@
		<0x7c56000 0x1000>,
		<0x7c5C000 0x4000>,
		<0x7c58000 0x400>;
		interrupts = <0 76 0>, <0 80 0>;
		interrupt-names = "emac_core0_irq", "emac_sgmii_irq";
		#address-cells = <0>;
		interrupt-parent = <&emac0>;
		#interrupt-cells = <1>;
		interrupts = <0 1 2>;
		interrupt-map-mask = <0xffffffff>;
		interrupt-map = <0 &intc 0 76 0
		1 &intc 0 80 0
		2 &tlmm_pinmux 30 0x8>;
		interrupt-names = "emac_core0_irq",
		"emac_sgmii_irq",
		"emac_wol_irq";
		emac_vreg1-supply = <&mdm9607_l1>;
		emac_vreg2-supply = <&mdm9607_l5>;
		emac_vreg3-supply = <&emac_lan_vreg>;
		@@ -1277,8 +1286,8 @@
		clock-names = "axi_clk", "cfg_ahb_clk", "125m_clk",
		"25m_clk", "tx_clk", "rx_clk", "sys_clk";
		pinctrl-names = "emac_active", "emac_sleep";
		pinctrl-0 = <&emac0_active &emac0_irq_active &emac0_rst_active>;
		pinctrl-1 = <&emac0_sleep &emac0_irq_sleep &emac0_rst_sleep>;
		pinctrl-0 = <&emac0_active &emac0_rst_active>;
		pinctrl-1 = <&emac0_sleep &emac0_rst_sleep>;
		qcom,emac-tstamp-en;
		qcom,emac-ptp-frac-ns-adj = <125000000 1>;
		phy-mode = "sgmii";