[POWERPC] include/asm-powerpc/: Spelling fixes (567e9fdd) · Commits · e / devices / android_kernel_xiaomi_markw

include/asm-powerpc/8xx_immap.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -123,7 +123,7 @@ typedef struct mem_ctlr {
		#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
		#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
		#define OR_BI 0x00000100 /* Burst inhibit */
		#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
		#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
		#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
		#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
		#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */

+1 −1

Original line number	Diff line number	Diff line
		@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
		#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
		#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
		#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
		#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
		#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
		#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
		#define CICR_IEN ((uint)0x00000080) /* Int. enable */
		#define CICR_SPS ((uint)0x00000001) /* SCC Spread */

+1 −1

Original line number	Diff line number	Diff line
		@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);

		/*
		* Close an Lp Event Path for a type and partition
		* returns 0 on sucess
		* returns 0 on success
		*/
		extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);

+1 −1

Original line number	Diff line number	Diff line
		@@ -304,7 +304,7 @@
		#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
		#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
		#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
		#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
		#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
		#define ESR_PTR 0x02000000 /* Program Exception - Trap */
		#define ESR_FP 0x01000000 /* Floating Point Operation */
		#define ESR_DST 0x00800000 /* Storage Exception - Data miss */

+5 −5

Original line number	Diff line number	Diff line
		@@ -22,7 +22,7 @@
		* Partition info commands
		*
		* These commands are used to retrieve the sdb-partition-XX datas from
		* the SMU. The lenght is always 2. First byte is the subcommand code
		* the SMU. The length is always 2. First byte is the subcommand code
		* and second byte is the partition ID.
		*
		* The reply is 6 bytes:
		@@ -176,9 +176,9 @@
		* data length is that of the string.
		*
		* The VSLEW command can be used to get or set the voltage slewing.
		* - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
		* - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
		* reply at data offset 6, 7 and 8.
		* - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
		* - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
		* used to set the voltage slewing point. The SMU replies with "DONE"
		* I yet have to figure out their exact meaning of those 3 bytes in
		* both cases. They seem to be:
		@@ -688,13 +688,13 @@ struct smu_user_cmd_hdr

		__u8 cmd; /* SMU command byte */
		__u8 pad[3]; /* padding */
		__u32 data_len; /* Lenght of data following */
		__u32 data_len; /* Length of data following */
		};

		struct smu_user_reply_hdr
		{
		__u32 status; /* Command status */
		__u32 reply_len; /* Lenght of data follwing */
		__u32 reply_len; /* Length of data follwing */
		};

		#endif /* _SMU_H */