[PATCH] m68knommu: remove DrangonEngine2 specific config code

/*

 *  linux/arch/m68knommu/platform/MC68VZ328/de2/config.c

 *

 *  Copyright (C) 1993 Hamish Macdonald

 *  Copyright (C) 1999 D. Jeff Dionne

 *  Copyright (C) 2001 Georges Menie, Ken Desmet

 *

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file COPYING in the main directory of this archive

 * for more details.

 */

#include <linux/config.h>

#include <linux/types.h>

#include <linux/kernel.h>

#include <linux/mm.h>

#include <linux/tty.h>

#include <linux/console.h>

#include <linux/kd.h>

#include <linux/netdevice.h>

#include <asm/setup.h>

#include <asm/system.h>

#include <asm/pgtable.h>

#include <asm/irq.h>

#include <asm/machdep.h>

#include <asm/MC68VZ328.h>

#ifdef CONFIG_INIT_LCD

#include "screen.h"

#endif

/* with a 33.16 MHz clock, this will give usec resolution to the time functions */

#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK

#define CLOCK_PRE 7

#define TICKS_PER_JIFFY 41450

static void

dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *))

{

	/* disable timer 1 */

	TCTL = 0;

	/* set ISR */

	if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) 

		panic("Unable to attach timer interrupt\n");

	/* Restart mode, Enable int, Set clock source */

	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;

	TPRER = CLOCK_PRE;

	TCMP = TICKS_PER_JIFFY;

	/* Enable timer 1 */

	TCTL |= TCTL_TEN;

}

static void dragen2_tick(void)

{

	/* Reset Timer1 */

	TSTAT &= 0;

}

static unsigned long dragen2_gettimeoffset(void)

{

	unsigned long ticks = TCN, offset = 0;

	/* check for pending interrupt */

	if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))

		offset = 1000000 / HZ;

	ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;

	return ticks + offset;

}

static void dragen2_gettod(int *year, int *mon, int *day, int *hour,

						   int *min, int *sec)

{

	long now = RTCTIME;

	*year = *mon = *day = 1;

	*hour = (now >> 24) % 24;

	*min = (now >> 16) % 60;

	*sec = now % 60;

}

static void dragen2_reset(void)

{

	local_irq_disable();

#ifdef CONFIG_INIT_LCD

	PBDATA |= 0x20;				/* disable CCFL light */

	PKDATA |= 0x4;				/* disable LCD controller */

	LCKCON = 0;

#endif

	__asm__ __volatile__(

		"reset\n\t"

		"moveal #0x04000000, %a0\n\t"

		"moveal 0(%a0), %sp\n\t"

		"moveal 4(%a0), %a0\n\t"

		"jmp (%a0)"

	);

}

static void init_hardware(void)

{

#ifdef CONFIG_DIRECT_IO_ACCESS

	SCR = 0x10;					/* allow user access to internal registers */

#endif

	/* CSGB Init */

	CSGBB = 0x4000;

	CSB = 0x1a1;

	/* CS8900 init */

	/* PK3: hardware sleep function pin, active low */

	PKSEL |= PK(3);				/* select pin as I/O */

	PKDIR |= PK(3);				/* select pin as output */

	PKDATA |= PK(3);			/* set pin high */

	/* PF5: hardware reset function pin, active high */

	PFSEL |= PF(5);				/* select pin as I/O */

	PFDIR |= PF(5);				/* select pin as output */

	PFDATA &= ~PF(5);			/* set pin low */

	/* cs8900 hardware reset */

	PFDATA |= PF(5);

	{ int i; for (i = 0; i < 32000; ++i); }

	PFDATA &= ~PF(5);

	/* INT1 enable (cs8900 IRQ) */

	PDPOL &= ~PD(1);			/* active high signal */

	PDIQEG &= ~PD(1);

	PDIRQEN |= PD(1);			/* IRQ enabled */

#ifdef CONFIG_68328_SERIAL_UART2

	/* Enable RXD TXD port bits to enable UART2 */

	PJSEL &= ~(PJ(5) | PJ(4));

#endif

#ifdef CONFIG_INIT_LCD

	/* initialize LCD controller */

	LSSA = (long) screen_bits;

	LVPW = 0x14;

	LXMAX = 0x140;

	LYMAX = 0xef;

	LRRA = 0;

	LPXCD = 3;

	LPICF = 0x08;

	LPOLCF = 0;

	LCKCON = 0x80;

	PCPDEN = 0xff;

	PCSEL = 0;

	/* Enable LCD controller */

	PKDIR |= 0x4;

	PKSEL |= 0x4;

	PKDATA &= ~0x4;

	/* Enable CCFL backlighting circuit */

	PBDIR |= 0x20;

	PBSEL |= 0x20;

	PBDATA &= ~0x20;

	/* contrast control register */

	PFDIR |= 0x1;

	PFSEL &= ~0x1;

	PWMR = 0x037F;

#endif

}

void config_BSP(char *command, int size)

{

	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");

#if defined(CONFIG_BOOTPARAM)

	strncpy(command, CONFIG_BOOTPARAM_STRING, size);

	command[size-1] = 0;

#else

	memset(command, 0, size);

#endif

	init_hardware();

	mach_sched_init = (void *)dragen2_sched_init;

	mach_tick = dragen2_tick;

	mach_gettimeoffset = dragen2_gettimeoffset;

	mach_reset = dragen2_reset;

	mach_gettod = dragen2_gettod;

}