Merge "defconfig: msm: Add CONFIG_ARCH_SDM450 for apq8053 IOT" (4687ba09) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/Makefile

+2 −1

Original line number	Diff line number	Diff line
		@@ -281,7 +281,8 @@ dtb-$(CONFIG_ARCH_SDM450) += sdm450-rcm.dtb \
		sdm450-mtp.dtb \
		sdm450-qrd.dtb \
		sdm450-pmi8940-mtp.dtb \
		sdm450-pmi8937-mtp.dtb
		sdm450-pmi8937-mtp.dtb \
		sdm450-iot-mtp.dtb

		dtb-$(CONFIG_ARCH_MDM9607) += mdm9607-rumi.dtb \
		mdm9607-cdp.dtb \

arch/arm/boot/dts/qcom/sdm450-iot-mtp.dts

0 → 100644

+90 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		/dts-v1/;

		#include "sdm450.dtsi"
		#include "msm-pmi8950.dtsi"
		#include "msm8953-mtp.dtsi"
		#include "msm8953-pmi8950.dtsi"
		#include "msm8953-camera-sensor-mtp.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. SDM450 + PMI8950 IOT MTP";
		compatible = "qcom,sdm450-mtp", "qcom,sdm450", "qcom,mtp";
		qcom,board-id = <8 2>;
		};

		&rpm_bus {
		rpm-regulator-ldoa18 {
		compatible = "qcom,rpm-smd-regulator-resource";
		qcom,resource-name = "ldoa";
		qcom,resource-id = <18>;
		qcom,regulator-type = <0>;
		qcom,hpm-min-load = <10000>;

		pm8953_l18: regulator-l18 {
		compatible = "qcom,rpm-smd-regulator";
		regulator-name = "pm8953_l18";
		qcom,set = <3>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <3300000>;
		qcom,init-voltage = <2700000>;
		};
		};
		};

		&modem_mem {
		reg = <0x0 0x86c00000 0x0 0x1e00000>;
		};

		&adsp_fw_mem {
		reg = <0x0 0x88a00000 0x0 0x1100000>;
		};

		&wcnss_fw_mem {
		reg = <0x0 0x89b00000 0x0 0x700000>;
		};

		&soc {
		hbtp {
		status = "disabled";
		};
		};

		&gpio_key_suspend {
		config {
		/delete-property/ bias-pull-up;
		bias-pull-down;
		};
		};

		/{
		mtp_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "batterydata-itech-3000mah.dtsi"
		#include "batterydata-ascent-3450mAh.dtsi"
		};
		};

		&pmi8950_fg {
		qcom,battery-data = <&mtp_batterydata>;
		};

		&pmi8950_charger {
		qcom,battery-data = <&mtp_batterydata>;
		qcom,chg-led-sw-controls;
		qcom,chg-led-support;
		qcom,external-typec;
		qcom,typec-psy-name = "typec";
		};

arch/arm/configs/apq8053_IoE-perf_defconfig

+1 −0

Original line number	Diff line number	Diff line
		@@ -42,6 +42,7 @@ CONFIG_ARCH_MSM8916=y
		CONFIG_ARCH_MSM8937=y
		CONFIG_ARCH_MSM8940=y
		CONFIG_ARCH_MSM8953=y
		CONFIG_ARCH_SDM450=y
		CONFIG_SMP=y
		CONFIG_SCHED_MC=y
		CONFIG_NR_CPUS=8

arch/arm64/configs/apq8053_IoE-perf_defconfig

+1 −0

Original line number	Diff line number	Diff line
		@@ -36,6 +36,7 @@ CONFIG_MODULE_SIG_SHA512=y
		CONFIG_PARTITION_ADVANCED=y
		CONFIG_ARCH_MSM=y
		CONFIG_ARCH_MSM8953=y
		CONFIG_ARCH_SDM450=y
		CONFIG_PCI_MSM=y
		CONFIG_SCHED_MC=y
		CONFIG_PREEMPT=y