Merge "ARM: dts: msm: Add RSB support for apq8009w BG Alpha"

	msm8909w-wtp-v1.dtb \

	apq8009w-bg-wtp-v1.dtb \

	apq8009w-bg-wtp-v2.dtb \

	apq8009w-bg-alpha.dtb \

	apq8009-mtp-wcd9326.dtb \

	msm8909-mtp-wcd9326.dtb \

	msm8909-mtp-wcd9326-refboard.dtb \

/*

 * Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/dts-v1/;

#include "msm8909-mtp.dtsi"

#include "msm8909w-gpu.dtsi"

#include "msm8909w.dtsi"

#include "msm8909w-pm660-mtp.dtsi"

#include "apq8009w-memory.dtsi"

#include "msm8909-audio-bg_codec.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. APQ8009W-PM660 BG Alpha";

	compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp";

	qcom,msm-id =   <265 0>,

			<301 0>;

	qcom,board-id = <8 0x113>;

	qcom,pmic-id =  <0x0001001b 0x0 0x0 0x0>,

			<0x0001011b 0x0 0x0 0x0>;

};

&soc {

	i2c@78b9000 { /* BLSP1 QUP5 */

		synaptics@20 {

			compatible = "synaptics,dsx-i2c";

			reg = <0x20>;

			interrupt-parent = <&msm_gpio>;

			interrupts = <98 0x2008>;

			vdd_ana-supply = <&pm660_l18>;

			vcc_i2c-supply = <&pm660_l13>;

			synaptics,pwr-reg-name = "vdd_ana";

			synaptics,bus-reg-name = "vcc_i2c";

			pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",

							"pmx_ts_release";

			pinctrl-0 = <&ts_int_active &ts_reset_active>;

			pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

			pinctrl-2 = <&ts_release>;

			synaptics,irq-gpio = <&msm_gpio 98 0x2008>;

			synaptics,irq-on-state = <0>;

			synaptics,irq-flags = <0x2008>;

			synaptics,power-delay-ms = <200>;

			synaptics,reset-delay-ms = <200>;

			synaptics,max-y-for-2d = <389>;

			synaptics,resume-in-workqueue;

			synaptics,x-flip;

			synaptics,y-flip;

			/delete-property/ synaptics,reset-gpio;

			/delete-property/ synaptics,display-coords;

			/delete-property/ synaptics,panel-coords;

			/delete-property/ synaptics,power-down;

			/delete-property/ synaptics,disable-gpios;

			/delete-property/ synaptics,is_wake;

		};

		/delete-node/ it7260@46;

	};

	qcom,blackghost {

		compatible = "qcom,pil-blackghost";

		qcom,firmware-name = "bg-wear";

		/* GPIO inputs from blackghost */

		qcom,bg2ap-status-gpio = <&msm_gpio 97 0>;

		qcom,bg2ap-errfatal-gpio = <&msm_gpio 95 0>;

		/* GPIO output to blackghost */

		qcom,ap2bg-status-gpio = <&msm_gpio 17 0>;

		qcom,ap2bg-errfatal-gpio = <&msm_gpio 23 0>;

	};

	qcom,msm-ssc-sensors {

		compatible = "qcom,msm-ssc-sensors";

	};

	qcom,glink-bgcom-xprt-bg {

		compatible = "qcom,glink-bgcom-xprt";

		label = "bg";

		qcom,qos-config = <&glink_qos_bg>;

		qcom,ramp-time = <0x10>,

				     <0x20>,

				     <0x30>,

				     <0x40>;

	};

	glink_qos_bg: qcom,glink-qos-config-bg {

		compatible = "qcom,glink-qos-config";

		qcom,flow-info = <0x80 0x0>,

				 <0x70 0x1>,

				 <0x60 0x2>,

				 <0x50 0x3>;

		qcom,mtu-size = <0x800>;

		qcom,tput-stats-cycle = <0xa>;

	};

	qcom,glink_pkt {

		compatible = "qcom,glinkpkt";

		qcom,glinkpkt-bg-daemon {

			qcom,glinkpkt-transport = "bgcom";

			qcom,glinkpkt-edge = "bg";

			qcom,glinkpkt-ch-name = "bg-daemon";

			qcom,glinkpkt-dev-name = "glink_pkt_bg_daemon";

		};

		qcom,glinkpkt-bg-display-ctrl {

			qcom,glinkpkt-transport = "bgcom";

			qcom,glinkpkt-edge = "bg";

			qcom,glinkpkt-ch-name = "display-ctrl";

			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_ctrl";

		};

		qcom,glinkpkt-bg-display-data {

			qcom,glinkpkt-transport = "bgcom";

			qcom,glinkpkt-edge = "bg";

			qcom,glinkpkt-ch-name = "display-data";

			qcom,glinkpkt-dev-name = "glink_pkt_bg_display_data";

		};

		qcom,glinkpkt-bg-rsb-ctrl {

			qcom,glinkpkt-transport = "bgcom";

			qcom,glinkpkt-edge = "bg";

			qcom,glinkpkt-ch-name = "RSB_CTRL";

			qcom,glinkpkt-dev-name = "glink_pkt_bg_rsb_ctrl";

		};

	};

	spi@78B8000 {  /* BLSP1 QUP4 */

		status = "ok";

		qcom,bg-spi {

			compatible = "qcom,bg-spi";

			reg = <0>;

			spi-max-frequency = <16000000>;

			interrupt-parent = <&msm_gpio>;

			qcom,irq-gpio = <&msm_gpio 110 1>;

		};

	};

	qcom,bg-rsb {

		compatible = "qcom,bg-rsb";

		vdd-ldo1-supply = <&pm660_l11>;

		vdd-ldo2-supply = <&pm660_l15>;

	};

};

&i2c_1 {

	status = "okay";

	nq@28 {

		compatible = "qcom,nq-nci";

		reg = <0x28>;

		qcom,nq-irq = <&msm_gpio 50 0x00>;

		qcom,nq-ven = <&msm_gpio 36 0x00>;

		qcom,nq-firm = <&msm_gpio 38 0x00>;

		qcom,nq-esepwr = <&msm_gpio 49 0x00>;

		qcom,nq-clkreq = <&pm660_gpios 4 0x00>;

		qcom,clk-src = "BBCLK3";

		interrupt-parent = <&msm_gpio>;

		interrupts = <50 0>;

		interrupt-names = "nfc_irq";

		pinctrl-names = "nfc_active","nfc_suspend";

		pinctrl-0 = <&nfcw_int_active &nfcw_disable_active>;

		pinctrl-1 = <&nfcw_int_suspend &nfcw_disable_suspend>;

		clock-names = "ref_clk";

	};

};

&spi_0 {

	status = "disabled";

};

&i2c_3 {

	status = "disabled";

};

&i2c_4 {

	status = "disabled";

};

&i2c_2 {

	status = "disabled";

};

&sdhc_2 {

	status = "disabled";

};

&audio_codec_mtp {

	status = "disabled";

};

&audio_codec_bg {

	status = "ok";

	vdd-spkr-supply = <&pm660_l11>;

};

&bg_cdc {

	status = "ok";

};

&blsp1_uart1 {

	status = "ok";

	pinctrl-names = "default";

	pinctrl-0 = <&uart_console_sleep>;

};

/* Pinctrl dt nodes for interrupt and reset gpio for Synaptics controller */

&ts_int_active {

	mux {

		pins = "gpio98";

	};

	config {

		pins = "gpio98";

	};

};

&ts_int_suspend {

	mux {

		pins = "gpio98";

	};

	config {

		pins = "gpio98";

	};

};

&ts_reset_active {

	mux {

		pins = "gpio16";

	};

	config {

		pins = "gpio16";

	};

};

&ts_reset_suspend {

	mux {

		pins = "gpio16";

	};

	config {

		pins = "gpio16";

	};

};

&ts_release {

	mux {

		pins = "gpio98", "gpio16";

	};

	config {

		pins = "gpio98", "gpio16";

	};

};

&pm660_charger {

	qcom,micro-usb;

};

&spi4_cs0_active {

	mux {

		pins = "gpio14";

		function = "blsp_spi4";

	};

	config {

		pins = "gpio14";

		drive-strength = <2>;

		bias-disable; /* No PULL */

		output-high;

	};

};