Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 41f1ab97 authored by c_binz's avatar c_binz Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: drone APQ8096 HiRes sensor enable 



Enable HiRes sensor for APQ8096 target. Sets correct voltage values
and enables I2C-3 and I2C-7

Change-Id: Iaebff9158921b66f44136eafa64e2f1b54b508d4
Signed-off-by: default avatarSvetoslav Stoilov <svetos@codeaurora.org>
Signed-off-by: default avatarc_binz <cbinz@codeaurora.org>
Signed-off-by: default avatarPetar Sivenov <psiven@codeaurora.org>
parent dc0292a5

arch/arm/boot/dts/qcom/apq8096-camera-sensor-drone.dtsi

+8 −8
Original line number Diff line number Diff line
@@ -128,13 +128,13 @@ 
		qcom,mount-angle = <0>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vdig-supply = <&vph_pwr_vreg>;

		cam_vdig-supply = <&pm8994_l3>;

		/* Cameras powered by PMIC: */

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l17>;

		cam_vana-supply = <&pm8994_l22>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-max-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-min-voltage = <1100000 0 2500000>;

		qcom,cam-vreg-max-voltage = <1100000 0 2500000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";
@@ -170,11 +170,11 @@ 
		qcom,mount-angle = <0>;

		cam_vdig-supply = <&vph_pwr_vreg>;

		/* Cameras powered by PMIC: */

		cam_vio-supply = <&pm8994_s4>;

		cam_vana-supply = <&pm8994_l18>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l23>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 3150000>;

		qcom,cam-vreg-max-voltage = <1000000 0 3600000>;

		qcom,cam-vreg-min-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

arch/arm/boot/dts/qcom/apq8096-drone-sensors.dtsi

+2 −2
Original line number Diff line number Diff line
@@ -105,11 +105,11 @@ 
		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_3_active>;

		pinctrl-1 = <&i2c_3_sleep>;

		status = "disabled";

		status = "ok";

	};



	i2c_7: i2c@75b5000 { /* BLSP2 QUP1 */

		status = "disabled";

		status = "ok";

	};



	blsp2_uart3: uart@075b1000 { /* HW-BLSP9 = BLSP2 UART3 */

arch/arm/boot/dts/qcom/apq8096-drone.dtsi

+4 −4
Original line number Diff line number Diff line
@@ -371,7 +371,7 @@ 
		status = "okay";

		pm8994_l3: regulator-l3 {

			regulator-min-microvolt = <1100000>;

			regulator-max-microvolt = <1100000>;

			regulator-max-microvolt = <1300000>;

			qcom,init-voltage = <1100000>;

			status = "okay";

		};
@@ -455,9 +455,9 @@ 
	rpm-regulator-ldoa22 {

		status = "okay";

		pm8994_l22: regulator-l22 {

			regulator-min-microvolt = <2800000>;

			regulator-max-microvolt = <2800000>;

			qcom,init-voltage = <2800000>;

			regulator-min-microvolt = <2500000>;

			regulator-max-microvolt = <2500000>;

			qcom,init-voltage = <2500000>;

			status = "okay";

		};

	};