ARM: dts: msm: Add camera device tree files for MSMgold (3e917a30) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/msmgold-camera-pinctrl.dtsi

0 → 100644

+277 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		cci {
		cci0_active: cci0_active {
		/* cci0 active state */
		mux {
		/* CLK, DATA */
		pins = "gpio29", "gpio30";
		function = "cci_i2c";
		};

		config {
		pins = "gpio29", "gpio30";
		drive-strength = <2>; /* 2 MA */
		bias-disable; /* No PULL */
		};
		};

		cci0_suspend: cci0_suspend {
		/* cci0 suspended state */
		mux {
		/* CLK, DATA */
		pins = "gpio29", "gpio30";
		function = "cci_i2c";
		};

		config {
		pins = "gpio29", "gpio30";
		drive-strength = <2>; /* 2 MA */
		bias-disable; /* No PULL */
		};
		};

		cci1_active: cci1_active {
		/* cci1 active state */
		mux {
		/* CLK, DATA */
		pins = "gpio31", "gpio32";
		function = "cci_i2c";
		};

		config {
		pins = "gpio31", "gpio32";
		drive-strength = <2>; /* 2 MA */
		bias-disable; /* No PULL */
		};
		};

		cci1_suspend: cci1_suspend {
		/* cci1 suspended state */
		mux {
		/* CLK, DATA */
		pins = "gpio31", "gpio32";
		function = "cci_i2c";
		};

		config {
		pins = "gpio31", "gpio32";
		drive-strength = <2>; /* 2 MA */
		bias-disable; /* No PULL */
		};
		};
		};

		/sensors /
		cam_sensor_mclk0_default: cam_sensor_mclk0_default {
		/* MCLK0 */
		mux {
		/* CLK, DATA */
		pins = "gpio26";
		function = "cam_mclk";
		};

		config {
		pins = "gpio26";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_sleep: cam_sensor_mclk0_sleep {
		/* MCLK0 */
		mux {
		/* CLK, DATA */
		pins = "gpio26";
		function = "cam_mclk";
		};

		config {
		pins = "gpio26";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_default: cam_sensor_rear_default {
		/* RESET, STANDBY */
		mux {
		pins = "gpio36", "gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio36","gpio35";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_sleep: cam_sensor_rear_sleep {
		/* RESET, STANDBY */
		mux {
		pins = "gpio36","gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio36","gpio35";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_vdig: cam_sensor_rear_vdig {
		/* VDIG */
		mux {
		pins = "gpio62";
		function = "gpio";
		};

		config {
		pins = "gpio62";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_vdig_sleep: cam_sensor_rear_vdig_sleep {
		/* VDIG */
		mux {
		pins = "gpio62";
		function = "gpio";
		};

		config {
		pins = "gpio62";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_default: cam_sensor_mclk1_default {
		/* MCLK1 */
		mux {
		/* CLK, DATA */
		pins = "gpio27";
		function = "cam_mclk";
		};

		config {
		pins = "gpio27";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_sleep: cam_sensor_mclk1_sleep {
		/* MCLK1 */
		mux {
		/* CLK, DATA */
		pins = "gpio27";
		function = "cam_mclk";
		};

		config {
		pins = "gpio27";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front_default: cam_sensor_front_default {
		/* RESET, STANDBY */
		mux {
		pins = "gpio38","gpio50";
		function = "gpio";
		};

		config {
		pins = "gpio38","gpio50";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front_sleep: cam_sensor_front_sleep {
		/* RESET, STANDBY */
		mux {
		pins = "gpio38","gpio50";
		function = "gpio";
		};

		config {
		pins = "gpio38","gpio50";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk2_default: cam_sensor_mclk2_default {
		/* MCLK2 */
		mux {
		/* CLK, DATA */
		pins = "gpio28";
		function = "cam_mclk";
		};

		config {
		pins = "gpio28";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk2_sleep: cam_sensor_mclk2_sleep {
		/* MCLK2 */
		mux {
		/* CLK, DATA */
		pins = "gpio28";
		function = "cam_mclk";
		};

		config {
		pins = "gpio28";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front1_default: cam_sensor_front1_default {
		/* RESET, STANDBY */
		mux {
		pins = "gpio40", "gpio39";
		function = "gpio";
		};

		config {
		pins = "gpio40", "gpio39";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front1_sleep: cam_sensor_front1_sleep {
		/* RESET, STANDBY */
		mux {
		pins = "gpio40", "gpio39";
		function = "gpio";
		};

		config {
		pins = "gpio40", "gpio39";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

arch/arm/boot/dts/qcom/msmgold-camera-sensor-cdp.dtsi

0 → 100644

+270 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&cci {
		actuator0: qcom,actuator@0 {
		cell-index = <0>;
		reg = <0x0>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		qcom,cam-vreg-op-mode = <80000>;
		};

		actuator1: qcom,actuator@1 {
		cell-index = <1>;
		reg = <0x1>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		qcom,cam-vreg-op-mode = <80000>;
		};

		eeprom0: qcom,eeprom@0 {
		cell-index = <0>;
		reg = <0x0>;
		qcom,eeprom-name = "le2464c";
		compatible = "qcom,eeprom";
		qcom,slave-addr = <0xa0>;
		qcom,cci-master = <0>;
		qcom,num-blocks = <1>;

		qcom,page0 = <0 0 0 0 0 0>;
		qcom,poll0 = <0 0 0 0 0 0>;
		qcom,saddr0 = <0xa0>;
		qcom,mem0 = <8192 0x0000 2 0 1 0>;

		cam_vio-supply = <&pmgold_l6>;
		qcom,cam-vreg-name = "cam_vio";
		qcom,cam-vreg-min-voltage = <0>;
		qcom,cam-vreg-max-voltage = <0>;
		qcom,cam-vreg-op-mode = <0>;
		qcom,cam-power-seq-type = "sensor_vreg";
		qcom,cam-power-seq-val = "cam_vio";
		qcom,cam-power-seq-cfg-val = <1>;
		qcom,cam-power-seq-delay = <1>;
		status = "ok";
		};

		eeprom1: qcom,eeprom@1 {
		cell-index = <1>;
		reg = <0x1>;
		qcom,eeprom-name = "sunny_8865";
		compatible = "qcom,eeprom";
		qcom,slave-addr = <0x6c>;
		qcom,cci-master = <0>;
		qcom,num-blocks = <8>;

		qcom,page0 = <1 0x0100 2 0x01 1 1>;
		qcom,poll0 = <0 0x0 2 0x0 1 0>;
		qcom,mem0 = <0 0x0 2 0x0 1 0>;

		qcom,page1 = <1 0x5002 2 0x00 1 0>;
		qcom,poll1 = <0 0x0 2 0x0 1 0>;
		qcom,mem1 = <0 0x0 2 0x0 1 0>;

		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;
		qcom,poll2 = <0 0x0 2 0x0 1 0>;
		qcom,mem2 = <0 0x0 2 0x0 1 0>;

		qcom,page3 = <1 0x3d88 2 0x70 1 0>;
		qcom,poll3 = <0 0x0 2 0x0 1 0>;
		qcom,mem3 = <0 0x0 2 0x0 1 0>;

		qcom,page4 = <1 0x3d89 2 0x10 1 0>;
		qcom,poll4 = <0 0x0 2 0x0 1 0>;
		qcom,mem4 = <0 0x0 2 0x0 1 0>;

		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;
		qcom,poll5 = <0 0x0 2 0x0 1 0>;
		qcom,mem5 = <0 0x0 2 0x0 1 0>;

		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;
		qcom,poll6 = <0 0x0 2 0x0 1 0>;
		qcom,mem6 = <0 0x0 2 0x0 1 0>;

		qcom,page7 = <1 0x3d81 2 0x01 1 10>;
		qcom,poll7 = <0 0x0 2 0x0 1 1>;
		qcom,mem7 = <1536 0x7010 2 0 1 0>;

		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",
		"sensor_vreg",
		"sensor_gpio", "sensor_gpio" , "sensor_clk";
		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",
		"sensor_gpio_reset", "sensor_gpio_standby",
		"sensor_cam_mclk";
		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x0>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <270>;
		qcom,led-flash-src = <&led_flash0>;
		qcom,eeprom-src = <&eeprom0>;
		qcom,actuator-src = <&actuator0>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
		&cam_sensor_rear_default
		&cam_sensor_rear_vdig>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
		&cam_sensor_rear_vdig_sleep>;
		gpios = <&tlmm 26 0>,
		<&tlmm 36 0>,
		<&tlmm 35 0>,
		<&tlmm 62 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-vdig = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_STANDBY0",
		"CAM_VDIG";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk0_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@1 {
		cell-index = <1>;
		compatible = "qcom,camera";
		reg = <0x1>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,mount-angle = <90>;
		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default
		&cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep
		&cam_sensor_front_sleep>;
		gpios = <&tlmm 27 0>,
		<&tlmm 38 0>,
		<&tlmm 50 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1",
		"CAM_STANDBY1";
		qcom,sensor-position = <0x100>;
		qcom,sensor-mode = <1>;
		qcom,cci-master = <1>;
		clocks = <&clock_gcc clk_mclk1_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@2 {
		cell-index = <2>;
		compatible = "qcom,camera";
		reg = <0x02>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,mount-angle = <90>;
		qcom,eeprom-src = <&eeprom1>;
		qcom,actuator-src = <&actuator1>;
		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
		&cam_sensor_front1_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};
		};

arch/arm/boot/dts/qcom/msmgold-camera-sensor-mtp.dtsi

0 → 100644

+270 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&cci {
		actuator0: qcom,actuator@0 {
		cell-index = <0>;
		reg = <0x0>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		qcom,cam-vreg-op-mode = <80000>;
		};

		actuator1: qcom,actuator@1 {
		cell-index = <1>;
		reg = <0x1>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		qcom,cam-vreg-op-mode = <80000>;
		};

		eeprom0: qcom,eeprom@0 {
		cell-index = <0>;
		reg = <0x0>;
		qcom,eeprom-name = "le2464c";
		compatible = "qcom,eeprom";
		qcom,slave-addr = <0xa0>;
		qcom,cci-master = <0>;
		qcom,num-blocks = <1>;

		qcom,page0 = <0 0 0 0 0 0>;
		qcom,poll0 = <0 0 0 0 0 0>;
		qcom,saddr0 = <0xa0>;
		qcom,mem0 = <8192 0x0000 2 0 1 0>;

		cam_vio-supply = <&pmgold_l6>;
		qcom,cam-vreg-name = "cam_vio";
		qcom,cam-vreg-min-voltage = <0>;
		qcom,cam-vreg-max-voltage = <0>;
		qcom,cam-vreg-op-mode = <0>;
		qcom,cam-power-seq-type = "sensor_vreg";
		qcom,cam-power-seq-val = "cam_vio";
		qcom,cam-power-seq-cfg-val = <1>;
		qcom,cam-power-seq-delay = <1>;
		status = "ok";
		};

		eeprom1: qcom,eeprom@1 {
		cell-index = <1>;
		reg = <0x1>;
		qcom,eeprom-name = "sunny_8865";
		compatible = "qcom,eeprom";
		qcom,slave-addr = <0x6c>;
		qcom,cci-master = <0>;
		qcom,num-blocks = <8>;

		qcom,page0 = <1 0x0100 2 0x01 1 1>;
		qcom,poll0 = <0 0x0 2 0x0 1 0>;
		qcom,mem0 = <0 0x0 2 0x0 1 0>;

		qcom,page1 = <1 0x5002 2 0x00 1 0>;
		qcom,poll1 = <0 0x0 2 0x0 1 0>;
		qcom,mem1 = <0 0x0 2 0x0 1 0>;

		qcom,page2 = <1 0x3d84 2 0xc0 1 0>;
		qcom,poll2 = <0 0x0 2 0x0 1 0>;
		qcom,mem2 = <0 0x0 2 0x0 1 0>;

		qcom,page3 = <1 0x3d88 2 0x70 1 0>;
		qcom,poll3 = <0 0x0 2 0x0 1 0>;
		qcom,mem3 = <0 0x0 2 0x0 1 0>;

		qcom,page4 = <1 0x3d89 2 0x10 1 0>;
		qcom,poll4 = <0 0x0 2 0x0 1 0>;
		qcom,mem4 = <0 0x0 2 0x0 1 0>;

		qcom,page5 = <1 0x3d8a 2 0x70 1 0>;
		qcom,poll5 = <0 0x0 2 0x0 1 0>;
		qcom,mem5 = <0 0x0 2 0x0 1 0>;

		qcom,page6 = <1 0x3d8b 2 0xf4 1 0>;
		qcom,poll6 = <0 0x0 2 0x0 1 0>;
		qcom,mem6 = <0 0x0 2 0x0 1 0>;

		qcom,page7 = <1 0x3d81 2 0x01 1 10>;
		qcom,poll7 = <0 0x0 2 0x0 1 1>;
		qcom,mem7 = <1536 0x7010 2 0 1 0>;

		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep &cam_sensor_front1_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		qcom,cam-power-seq-type = "sensor_vreg", "sensor_vreg",
		"sensor_vreg",
		"sensor_gpio", "sensor_gpio" , "sensor_clk";
		qcom,cam-power-seq-val = "cam_vdig", "cam_vana", "cam_vio",
		"sensor_gpio_reset", "sensor_gpio_standby",
		"sensor_cam_mclk";
		qcom,cam-power-seq-cfg-val = <1 1 1 1 1 24000000>;
		qcom,cam-power-seq-delay = <1 1 1 30 30 5>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x0>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <270>;
		qcom,led-flash-src = <&led_flash0>;
		qcom,eeprom-src = <&eeprom0>;
		qcom,actuator-src = <&actuator0>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
		&cam_sensor_rear_default
		&cam_sensor_rear_vdig>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
		&cam_sensor_rear_vdig_sleep>;
		gpios = <&tlmm 26 0>,
		<&tlmm 36 0>,
		<&tlmm 35 0>,
		<&tlmm 62 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-vdig = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_STANDBY0",
		"CAM_VDIG";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk0_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@1 {
		cell-index = <1>;
		compatible = "qcom,camera";
		reg = <0x1>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,mount-angle = <90>;
		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default
		&cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep
		&cam_sensor_front_sleep>;
		gpios = <&tlmm 27 0>,
		<&tlmm 38 0>,
		<&tlmm 50 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1",
		"CAM_STANDBY1";
		qcom,sensor-position = <0x100>;
		qcom,sensor-mode = <1>;
		qcom,cci-master = <1>;
		clocks = <&clock_gcc clk_mclk1_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};

		qcom,camera@2 {
		cell-index = <2>;
		compatible = "qcom,camera";
		reg = <0x02>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,mount-angle = <90>;
		qcom,eeprom-src = <&eeprom1>;
		qcom,actuator-src = <&actuator1>;
		cam_vdig-supply = <&pmgold_l23>;
		cam_vana-supply = <&pmgold_l22>;
		cam_vio-supply = <&pmgold_l6>;
		cam_vaf-supply = <&pmgold_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		qcom,gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front1_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
		&cam_sensor_front1_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		};
		};

arch/arm/boot/dts/qcom/msmgold-camera.dtsi

0 → 100644

+506 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/arm/boot/dts/qcom/msmgold-cdp.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -12,6 +12,7 @@
		*/

		#include "msmgold-pinctrl.dtsi"
		#include "msmgold-camera-sensor-cdp.dtsi"

		&soc {
		};