Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3e0a07f8 authored by Gregory CLEMENT's avatar Gregory CLEMENT Committed by Russell King
Browse files

ARM: 7773/1: PJ4B: Add support for errata 4742 



This commit fixes the regression on Armada 370 (the kernal hang during
boot) introduced by the commit: "ARM: 7691/1: mm: kill unused
TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead".

When coming out of either a Wait for Interrupt (WFI) or a Wait for
Event (WFE) IDLE states, a specific timing sensitivity exists between
the retiring WFI/WFE instructions and the newly issued subsequent
instructions. This sensitivity can result in a CPU hang scenario.  The
workaround is to insert either a Data Synchronization Barrier (DSB) or
Data Memory Barrier (DMB) command immediately after the WFI/WFE
instruction.

This commit was based on the work of Lior Amsalem, but heavily
modified to apply the errata fix dynamically according to the
processor type thanks to the suggestions of Russell King and Nicolas
Pitre.

Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: default avatarWill Deacon <will.deacon@arm.com>
Acked-by: default avatarNicolas Pitre <nico@linaro.org>
Tested-by: default avatarWilly Tarreau <w@1wt.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 63384fd0

arch/arm/Kconfig

+14 −0
Original line number Diff line number Diff line
@@ -1087,6 +1087,20 @@ if !MMU 
source "arch/arm/Kconfig-nommu"

endif



config PJ4B_ERRATA_4742

	bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"

	depends on CPU_PJ4B && MACH_ARMADA_370

	default y

	help

	  When coming out of either a Wait for Interrupt (WFI) or a Wait for

	  Event (WFE) IDLE states, a specific timing sensitivity exists between

	  the retiring WFI/WFE instructions and the newly issued subsequent

	  instructions.  This sensitivity can result in a CPU hang scenario.

	  Workaround:

	  The software must insert either a Data Synchronization Barrier (DSB)

	  or Data Memory Barrier (DMB) command immediately after the WFI/WFE

	  instruction



config ARM_ERRATA_326103

	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"

	depends on CPU_V6

arch/arm/include/asm/glue-proc.h

+9 −0
Original line number Diff line number Diff line
@@ -230,6 +230,15 @@ 
# endif

#endif



#ifdef CONFIG_CPU_PJ4B

# ifdef CPU_NAME

#  undef  MULTI_CPU

#  define MULTI_CPU

# else

#  define CPU_NAME cpu_pj4b

# endif

#endif



#ifndef MULTI_CPU

#define cpu_proc_init			__glue(CPU_NAME,_proc_init)

#define cpu_proc_fin			__glue(CPU_NAME,_proc_fin)

arch/arm/mm/proc-macros.S

+5 −0
Original line number Diff line number Diff line
@@ -333,3 +333,8 @@ ENTRY(\name\()_tlb_fns) 
	.endif

	.size	\name\()_tlb_fns, . - \name\()_tlb_fns

.endm



.macro globl_equ x, y

	.globl	\x

	.equ	\x, \y

.endm

arch/arm/mm/proc-v7.S

+31 −3
Original line number Diff line number Diff line
@@ -138,6 +138,29 @@ ENTRY(cpu_v7_do_resume) 
	mov	r0, r8			@ control register

	b	cpu_resume_mmu

ENDPROC(cpu_v7_do_resume)

#endif



#ifdef CONFIG_CPU_PJ4B

	globl_equ	cpu_pj4b_switch_mm,     cpu_v7_switch_mm

	globl_equ	cpu_pj4b_set_pte_ext,	cpu_v7_set_pte_ext

	globl_equ	cpu_pj4b_proc_init,	cpu_v7_proc_init

	globl_equ	cpu_pj4b_proc_fin, 	cpu_v7_proc_fin

	globl_equ	cpu_pj4b_reset,	   	cpu_v7_reset

#ifdef CONFIG_PJ4B_ERRATA_4742

ENTRY(cpu_pj4b_do_idle)

	dsb					@ WFI may enter a low-power mode

	wfi

	dsb					@barrier

	mov	pc, lr

ENDPROC(cpu_pj4b_do_idle)

#else

	globl_equ	cpu_pj4b_do_idle,  	cpu_v7_do_idle

#endif

	globl_equ	cpu_pj4b_dcache_clean_area,	cpu_v7_dcache_clean_area

	globl_equ	cpu_pj4b_do_suspend,	cpu_v7_do_suspend

	globl_equ	cpu_pj4b_do_resume,	cpu_v7_do_resume

	globl_equ	cpu_pj4b_suspend_size,	cpu_v7_suspend_size



#endif



	__CPUINIT
@@ -350,6 +373,9 @@ __v7_setup_stack: 


	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)

	define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1

#ifdef CONFIG_CPU_PJ4B

	define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1

#endif



	.section ".rodata"
@@ -362,7 +388,7 @@ __v7_setup_stack: 
	/*

	 * Standard v7 proc info content

	 */

.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0

.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions

	ALT_SMP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \

			PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)

	ALT_UP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
@@ -375,7 +401,7 @@ __v7_setup_stack: 
	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \

		HWCAP_EDSP | HWCAP_TLS | \hwcaps

	.long	cpu_v7_name

	.long	v7_processor_functions

	.long	\proc_fns

	.long	v7wbi_tlb_fns

	.long	v6_user_fns

	.long	v7_cache_fns
@@ -407,12 +433,14 @@ __v7_ca9mp_proc_info: 
	/*

	 * Marvell PJ4B processor.

	 */

#ifdef CONFIG_CPU_PJ4B

	.type   __v7_pj4b_proc_info, #object

__v7_pj4b_proc_info:

	.long	0x560f5800

	.long	0xff0fff00

	__v7_proc __v7_pj4b_setup

	__v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions

	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info

#endif



	/*

	 * ARM Ltd. Cortex A7 processor.