Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3db716bc authored by Archit Taneja's avatar Archit Taneja Committed by Tomi Valkeinen
Browse files

OMAPDSS: sharp-ls panel: remove platform_enable/disable callbacks 



The sharp-ls panel driver now manages the gpios required to configure the panel.
This was previously done in omap_dss_device's platform_enable/disable callbacks
defined in board files using this panel.

All the board files using this panel now pass the gpio information as platform
data via the panel_sharp_ls037v7dw01_data struct, which is needed by the panel
driver to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.

Signed-off-by: default avatarArchit Taneja <archit@ti.com>
parent 31030985

drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c

+0 −11
Original line number Diff line number Diff line
@@ -125,12 +125,6 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev) 
	/* wait couple of vsyncs until enabling the LCD */

	msleep(50);



	if (dssdev->platform_enable) {

		r = dssdev->platform_enable(dssdev);

		if (r)

			goto err1;

	}



	if (gpio_is_valid(pd->resb_gpio))

		gpio_set_value_cansleep(pd->resb_gpio, 1);
@@ -138,8 +132,6 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev) 
		gpio_set_value_cansleep(pd->ini_gpio, 1);



	return 0;

err1:

	omapdss_dpi_display_disable(dssdev);

err0:

	return r;

}
@@ -157,9 +149,6 @@ static void sharp_ls_power_off(struct omap_dss_device *dssdev) 
	if (gpio_is_valid(pd->resb_gpio))

		gpio_set_value_cansleep(pd->resb_gpio, 0);



	if (dssdev->platform_disable)

		dssdev->platform_disable(dssdev);



	/* wait at least 5 vsyncs after disabling the LCD */



	msleep(100);