Merge "ARM: dts: msm: Add support for AUO 390p cmd mode panel on msm8909w" (3d6a8c1d) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/dsi-panel-390p-auo-cmd.dtsi

0 → 100644

+89 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_auo_390p_cmd: qcom,mdss_dsi_auo_390p_cmd {
		qcom,mdss-dsi-panel-name = "AUO 390p command mode dsi panel";
		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-panel-width = <390>;
		qcom,mdss-dsi-panel-height = <390>;
		qcom,mdss-pan-physical-height-dimension = <29>;
		qcom,mdss-pan-physical-width-dimension = <29>;
		qcom,mdss-dsi-h-front-porch = <4>;
		qcom,mdss-dsi-h-back-porch = <4>;
		qcom,mdss-dsi-h-pulse-width = <4>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <8>;
		qcom,mdss-dsi-v-front-porch = <8>;
		qcom,mdss-dsi-v-pulse-width = <8>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-on-command = [
		15 01 00 00 00 00 02 fe 01
		15 01 00 00 00 00 02 0a f0
		15 01 00 00 00 00 02 fe 00
		15 01 00 00 00 00 02 35 00
		29 01 00 00 00 00 05 2a 00 04 01 89
		29 01 00 00 00 00 05 2b 00 00 01 85
		29 01 00 00 00 00 05 30 00 00 01 85
		29 01 00 00 00 00 05 31 00 04 01 89
		05 01 00 00 00 00 02 12 00
		15 01 00 00 00 00 02 53 20
		05 01 00 00 96 00 02 11 00
		05 01 00 00 00 00 02 29 00
		39 01 00 00 00 00 06 f0 55 aa 52 08 01
		39 01 00 00 00 00 07 ff 00 55 aa 52 08 01
		];
		qcom,mdss-dsi-off-command = [
		05 01 00 00 00 00 02 28 00
		05 01 00 00 78 00 02 10 00
		];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-idle-on-command = [
		05 01 00 00 00 00 01 39 /* Idle-Mode On */
		];
		qcom,mdss-dsi-idle-on-command-state = "dsi_hs_mode";
		qcom,mdss-dsi-idle-off-command = [
		05 01 00 00 00 00 01 38 /* Idle-Mode Off */
		];
		qcom,mdss-dsi-traffic-mode = "burst_mode";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-te-pin-select = <1>;
		qcom,mdss-dsi-te-dcs-command = <1>;
		qcom,mdss-dsi-te-using-te-pin;
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-panel-timings = [5F 12 0A 00 32 34 10
		16 0F 03 04 00];
		qcom,mdss-dsi-t-clk-post = <0x05>;
		qcom,mdss-dsi-t-clk-pre = <0x11>;
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <255>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>;
		};
		};

arch/arm/boot/dts/qcom/msm8909-mdss-panels.dtsi

+34 −1

Original line number	Diff line number	Diff line
		/* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
		/* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		@@ -22,6 +22,7 @@
		#include "dsi-panel-hx8394d-480p-video.dtsi"
		#include "dsi-panel-auo-qvga-cmd.dtsi"
		#include "dsi-panel-auo-cx-qvga-cmd.dtsi"
		#include "dsi-panel-390p-auo-cmd.dtsi"

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {
		@@ -46,6 +47,38 @@
		qcom,supply-disable-load = <100>;
		};
		};

		dsi_pm660_panel_pwr_supply: dsi_pm660_panel_pwr_supply {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vdd";
		qcom,supply-min-voltage = <3000000>;
		qcom,supply-max-voltage = <3000000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@2 {
		reg = <2>;
		qcom,supply-name = "bklt";
		qcom,supply-min-voltage = <0>;
		qcom,supply-max-voltage = <0>;
		qcom,supply-enable-load = <0>;
		qcom,supply-disable-load = <0>;
		};
		};
		};

arch/arm/boot/dts/qcom/msm8909w-pm660-mtp.dtsi

+35 −13

Original line number	Diff line number	Diff line
		@@ -62,19 +62,6 @@
		/delete-property/ vdd-io-supply;
		};

		qcom,mdss_dsi@0 {
		/delete-property/ vdda-supply;
		/delete-property/ vddio-supply;
		qcom,mdss_dsi_ctrl0@1ac8000 {
		/delete-property/ vdd-supply;
		/delete-property/ vddio-supply;
		};
		};

		qcom,mdss_dsi_pll@1ac8300 {
		/delete-property/ vddio-supply;
		};

		qcom,msm-thermal {
		/delete-property/ vdd-dig-supply;
		};
		@@ -195,3 +182,38 @@
		&pm660_haptics {
		qcom,actuator-type = "erm";
		};

		&dsi_auo_390p_cmd {
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,panel-supply-entries = <&dsi_pm660_panel_pwr_supply>;
		};

		&mdss_dsi{
		vdda-supply = <&pm660_l5>; /1.2V/
		vddio-supply = <&pm660_l12>; /1.8V/
		qcom,mdss_dsi_ctrl0@1ac8000 {
		bklt-supply = <&bob_vreg>;
		vdd-supply = <&pm660_l18>; /1.8/
		vddio-supply = <&pm660_l11>;
		};
		};

		&mdss_dsi0{
		qcom,dsi-pref-prim-pan = <&dsi_auo_390p_cmd>;
		qcom,platform-bklight-en-gpio = <&msm_gpio 52 0>;
		};

		&mdss_dsi0_pll {
		vddio-supply = <&pm660_l12>; /1.8V/
		};

		&pm660_gpios {
		gpio@cb00 {
		status = "ok";
		qcom,mode = <1>;
		qcom,vin-sel = <0>;
		qcom,src-sel = <0>;
		qcom,master-en = <1>;
		qcom,out-strength = <2>;
		};
		};

arch/arm/boot/dts/qcom/msm8909w-pm660-regulator.dtsi

+9 −0

Original line number	Diff line number	Diff line
		@@ -401,4 +401,13 @@
		<2 (-1) 2 4 6>;
		qcom,cpr-quot-adjust-scaling-factor-max = <1400>;
		};

		bob_vreg: bob_vreg {
		compatible = "regulator-fixed";
		regulator-name = "bob_vreg";
		startup-delay-us = <400>;
		enable-active-high;
		gpio = <&pm660_gpios 12 0>;
		status = "okay";
		};
		};