arch/tile: improve support for PCI hotplug (398fa5a9) · Commits · e / devices / android_kernel_xiaomi_markw

arch/tile/Kconfig

+8 −0

Original line number	Diff line number	Diff line
		@@ -339,6 +339,14 @@ config NO_IOPORT

		source "drivers/pci/Kconfig"

		config HOTPLUG
		bool "Support for hot-pluggable devices"
		---help---
		Say Y here if you want to plug devices into your computer while
		the system is running, and be able to use them quickly. In many
		cases, the devices can likewise be unplugged at any time too.
		One well-known example of this is USB.

		source "drivers/pci/hotplug/Kconfig"

		endmenu

arch/tile/include/asm/pci.h

+2 −1

Original line number	Diff line number	Diff line
		@@ -46,7 +46,8 @@ struct pci_controller {
		*/
		#define PCI_DMA_BUS_IS_PHYS 1

		int __init tile_pci_init(void);
		int __devinit tile_pci_init(void);
		int __devinit pcibios_init(void);

		void __iomem pci_iomap(struct pci_dev dev, int bar, unsigned long max);
		static inline void pci_iounmap(struct pci_dev dev, void __iomem addr) {}

arch/tile/kernel/pci.c

+117 −90

Original line number	Diff line number	Diff line
		/*
		* Copyright 2010 Tilera Corporation. All Rights Reserved.
		* Copyright 2011 Tilera Corporation. All Rights Reserved.
		*
		* This program is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		@@ -59,6 +59,7 @@ int __write_once tile_plx_gen1;

		static struct pci_controller controllers[TILE_NUM_PCIE];
		static int num_controllers;
		static int pci_scan_flags[TILE_NUM_PCIE];

		static struct pci_ops tile_cfg_ops;

		@@ -79,7 +80,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
		* controller_id is the controller number, config type is 0 or 1 for
		* config0 or config1 operations.
		*/
		static int __init tile_pcie_open(int controller_id, int config_type)
		static int __devinit tile_pcie_open(int controller_id, int config_type)
		{
		char filename[32];
		int fd;
		@@ -95,7 +96,7 @@ static int __init tile_pcie_open(int controller_id, int config_type)
		/*
		* Get the IRQ numbers from the HV and set up the handlers for them.
		*/
		static int __init tile_init_irqs(int controller_id,
		static int __devinit tile_init_irqs(int controller_id,
		struct pci_controller *controller)
		{
		char filename[32];
		@@ -139,15 +140,23 @@ static int __init tile_init_irqs(int controller_id,
		*
		* Returns the number of controllers discovered.
		*/
		int __init tile_pci_init(void)
		int __devinit tile_pci_init(void)
		{
		int i;

		pr_info("PCI: Searching for controllers...\n");

		/* Re-init number of PCIe controllers to support hot-plug feature. */
		num_controllers = 0;

		/* Do any configuration we need before using the PCIe */

		for (i = 0; i < TILE_NUM_PCIE; i++) {
		/*
		* To see whether we need a real config op based on
		* the results of pcibios_init(), to support PCIe hot-plug.
		*/
		if (pci_scan_flags[i] == 0) {
		int hv_cfg_fd0 = -1;
		int hv_cfg_fd1 = -1;
		int hv_mem_fd = -1;
		@@ -177,7 +186,7 @@ int __init tile_pci_init(void)

		pr_info("PCI: Found PCI controller #%d\n", i);

		controller = &controllers[num_controllers];
		controller = &controllers[i];

		if (tile_init_irqs(i, controller)) {
		pr_err("PCI: Could not initialize "
		@@ -185,7 +194,7 @@ int __init tile_pci_init(void)
		goto err_cont;
		}

		controller->index = num_controllers;
		controller->index = i;
		controller->hv_cfg_fd[0] = hv_cfg_fd0;
		controller->hv_cfg_fd[1] = hv_cfg_fd1;
		controller->hv_mem_fd = hv_mem_fd;
		@@ -205,6 +214,7 @@ err_cont:
		hv_dev_close(hv_mem_fd);
		continue;
		}
		}

		/*
		* Before using the PCIe, see if we need to do any platform-specific
		@@ -232,7 +242,7 @@ static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
		}


		static void __init fixup_read_and_payload_sizes(void)
		static void __devinit fixup_read_and_payload_sizes(void)
		{
		struct pci_dev *dev = NULL;
		int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
		@@ -282,7 +292,7 @@ static void __init fixup_read_and_payload_sizes(void)
		* The controllers have been set up by the time we get here, by a call to
		* tile_pci_init.
		*/
		static int __init pcibios_init(void)
		int __devinit pcibios_init(void)
		{
		int i;

		@@ -296,7 +306,13 @@ static int __init pcibios_init(void)
		mdelay(250);

		/* Scan all of the recorded PCI controllers. */
		for (i = 0; i < num_controllers; i++) {
		for (i = 0; i < TILE_NUM_PCIE; i++) {
		/*
		* Do real pcibios init ops if the controller is initialized
		* by tile_pci_init() successfully and not initialized by
		* pcibios_init() yet to support PCIe hot-plug.
		*/
		if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
		struct pci_controller *controller = &controllers[i];
		struct pci_bus *bus;

		@@ -314,7 +330,7 @@ static int __init pcibios_init(void)
		bus = pci_scan_bus(0, controller->ops, controller);
		controller->root_bus = bus;
		controller->last_busno = bus->subordinate;

		}
		}

		/* Do machine dependent PCI interrupt routing */
		@@ -326,20 +342,28 @@ static int __init pcibios_init(void)
		* It allocates all of the resources (I/O memory, etc)
		* associated with the devices read in above.
		*/

		pci_assign_unassigned_resources();

		/* Configure the max_read_size and max_payload_size values. */
		fixup_read_and_payload_sizes();

		/* Record the I/O resources in the PCI controller structure. */
		for (i = 0; i < num_controllers; i++) {
		for (i = 0; i < TILE_NUM_PCIE; i++) {
		/*
		* Do real pcibios init ops if the controller is initialized
		* by tile_pci_init() successfully and not initialized by
		* pcibios_init() yet to support PCIe hot-plug.
		*/
		if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
		struct pci_bus *root_bus = controllers[i].root_bus;
		struct pci_bus *next_bus;
		struct pci_dev *dev;

		list_for_each_entry(dev, &root_bus->devices, bus_list) {
		/* Find the PCI host controller, ie. the 1st bridge. */
		/*
		* Find the PCI host controller, ie. the 1st
		* bridge.
		*/
		if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
		(PCI_SLOT(dev->devfn) == 0)) {
		next_bus = dev->subordinate;
		@@ -350,10 +374,13 @@ static int __init pcibios_init(void)
		controllers[i].mem_resources[2] =
		*next_bus->resource[2];

		/* Setup flags. */
		pci_scan_flags[i] = 1;

		break;
		}
		}

		}
		}

		return 0;
		@@ -381,7 +408,7 @@ char __devinit pcibios_setup(char str)
		/*
		* This is called from the generic Linux layer.
		*/
		void __init pcibios_update_irq(struct pci_dev *dev, int irq)
		void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
		{
		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
		}