Merge branch 'ath6kl-next' of master.kernel.org:/pub/scm/linux/kernel/git/kvalo/ath6kl

source "drivers/net/wireless/ath/ath5k/Kconfig"

source "drivers/net/wireless/ath/ath9k/Kconfig"

source "drivers/net/wireless/ath/carl9170/Kconfig"

source "drivers/net/wireless/ath/ath6kl/Kconfig"

endif

obj-$(CONFIG_ATH5K)		+= ath5k/

obj-$(CONFIG_ATH9K_HW)		+= ath9k/

obj-$(CONFIG_CARL9170)		+= carl9170/

obj-$(CONFIG_ATH6KL)		+= ath6kl/

obj-$(CONFIG_ATH_COMMON)	+= ath.o

config ATH6KL

	tristate "Atheros ath6kl support"

	depends on MMC

	depends on CFG80211

	---help---

	  This module adds support for wireless adapters based on

	  Atheros AR6003 chipset running over SDIO. If you choose to

	  build it as a module, it will be called ath6kl. Pls note

	  that AR6002 and AR6001 are not supported by this driver.

config ATH6KL_DEBUG

	bool "Atheros ath6kl debugging"

	depends on ATH6KL

	---help---

	  Enables debug support

#------------------------------------------------------------------------------

# Copyright (c) 2004-2010 Atheros Communications Inc.

# All rights reserved.

#

#

#

# Permission to use, copy, modify, and/or distribute this software for any

# purpose with or without fee is hereby granted, provided that the above

# copyright notice and this permission notice appear in all copies.

#

# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES

# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF

# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN

# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF

# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

#

#

#

# Author(s): ="Atheros"

#------------------------------------------------------------------------------

obj-$(CONFIG_ATH6KL) := ath6kl.o

ath6kl-y += debug.o

ath6kl-y += htc_hif.o

ath6kl-y += htc.o

ath6kl-y += bmi.o

ath6kl-y += cfg80211.o

ath6kl-y += init.o

ath6kl-y += main.o

ath6kl-y += txrx.o

ath6kl-y += wmi.o

ath6kl-y += node.o

ath6kl-y += sdio.o

/*

 * Copyright (c) 2004-2011 Atheros Communications Inc.

 *

 * Permission to use, copy, modify, and/or distribute this software for any

 * purpose with or without fee is hereby granted, provided that the above

 * copyright notice and this permission notice appear in all copies.

 *

 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES

 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF

 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN

 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF

 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

 */

#include "core.h"

#include "hif-ops.h"

#include "target.h"

#include "debug.h"

static int ath6kl_get_bmi_cmd_credits(struct ath6kl *ar)

{

	u32 addr;

	unsigned long timeout;

	int ret;

	ar->bmi.cmd_credits = 0;

	/* Read the counter register to get the command credits */

	addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;

	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);

	while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {

		/*

		 * Hit the credit counter with a 4-byte access, the first byte

		 * read will hit the counter and cause a decrement, while the

		 * remaining 3 bytes has no effect. The rationale behind this

		 * is to make all HIF accesses 4-byte aligned.

		 */

		ret = hif_read_write_sync(ar, addr,

					 (u8 *)&ar->bmi.cmd_credits, 4,

					 HIF_RD_SYNC_BYTE_INC);

		if (ret) {

			ath6kl_err("Unable to decrement the command credit count register: %d\n",

				   ret);

			return ret;

		}

		/* The counter is only 8 bits.

		 * Ignore anything in the upper 3 bytes

		 */

		ar->bmi.cmd_credits &= 0xFF;

	}

	if (!ar->bmi.cmd_credits) {

		ath6kl_err("bmi communication timeout\n");

		return -ETIMEDOUT;

	}

	return 0;

}

static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar, bool need_timeout)

{

	unsigned long timeout;

	u32 rx_word = 0;

	int ret = 0;

	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);

	while ((!need_timeout || time_before(jiffies, timeout)) && !rx_word) {

		ret = hif_read_write_sync(ar, RX_LOOKAHEAD_VALID_ADDRESS,

					  (u8 *)&rx_word, sizeof(rx_word),

					  HIF_RD_SYNC_BYTE_INC);

		if (ret) {

			ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");

			return ret;

		}

		 /* all we really want is one bit */

		rx_word &= (1 << ENDPOINT1);

	}

	if (!rx_word) {

		ath6kl_err("bmi_recv_buf FIFO empty\n");

		return -EINVAL;

	}

	return ret;

}

static int ath6kl_bmi_send_buf(struct ath6kl *ar, u8 *buf, u32 len)

{

	int ret;

	u32 addr;

	ret = ath6kl_get_bmi_cmd_credits(ar);

	if (ret)

		return ret;

	addr = ar->mbox_info.htc_addr;

	ret = hif_read_write_sync(ar, addr, buf, len,

				  HIF_WR_SYNC_BYTE_INC);

	if (ret)

		ath6kl_err("unable to send the bmi data to the device\n");

	return ret;

}

static int ath6kl_bmi_recv_buf(struct ath6kl *ar,

			u8 *buf, u32 len, bool want_timeout)

{

	int ret;

	u32 addr;

	/*

	 * During normal bootup, small reads may be required.

	 * Rather than issue an HIF Read and then wait as the Target

	 * adds successive bytes to the FIFO, we wait here until

	 * we know that response data is available.

	 *

	 * This allows us to cleanly timeout on an unexpected

	 * Target failure rather than risk problems at the HIF level.

	 * In particular, this avoids SDIO timeouts and possibly garbage

	 * data on some host controllers.  And on an interconnect

	 * such as Compact Flash (as well as some SDIO masters) which

	 * does not provide any indication on data timeout, it avoids

	 * a potential hang or garbage response.

	 *

	 * Synchronization is more difficult for reads larger than the

	 * size of the MBOX FIFO (128B), because the Target is unable

	 * to push the 129th byte of data until AFTER the Host posts an

	 * HIF Read and removes some FIFO data.  So for large reads the

	 * Host proceeds to post an HIF Read BEFORE all the data is

	 * actually available to read.  Fortunately, large BMI reads do

	 * not occur in practice -- they're supported for debug/development.

	 *

	 * So Host/Target BMI synchronization is divided into these cases:

	 *  CASE 1: length < 4

	 *        Should not happen

	 *

	 *  CASE 2: 4 <= length <= 128

	 *        Wait for first 4 bytes to be in FIFO

	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for

	 *        a BMI command credit, which indicates that the ENTIRE

	 *        response is available in the the FIFO

	 *

	 *  CASE 3: length > 128

	 *        Wait for the first 4 bytes to be in FIFO

	 *

	 * For most uses, a small timeout should be sufficient and we will

	 * usually see a response quickly; but there may be some unusual

	 * (debug) cases of BMI_EXECUTE where we want an larger timeout.

	 * For now, we use an unbounded busy loop while waiting for

	 * BMI_EXECUTE.

	 *

	 * If BMI_EXECUTE ever needs to support longer-latency execution,

	 * especially in production, this code needs to be enhanced to sleep

	 * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently

	 * a function of Host processor speed.

	 */

	if (len >= 4) { /* NB: Currently, always true */

		ret = ath6kl_bmi_get_rx_lkahd(ar, want_timeout);

		if (ret)

			return ret;

	}

	addr = ar->mbox_info.htc_addr;

	ret = hif_read_write_sync(ar, addr, buf, len,

				  HIF_RD_SYNC_BYTE_INC);

	if (ret) {

		ath6kl_err("Unable to read the bmi data from the device: %d\n",

			   ret);

		return ret;

	}

	return 0;

}

int ath6kl_bmi_done(struct ath6kl *ar)

{

	int ret;

	u32 cid = BMI_DONE;

	if (ar->bmi.done_sent) {

		ath6kl_dbg(ATH6KL_DBG_BMI, "bmi done skipped\n");

		return 0;

	}

	ar->bmi.done_sent = true;

	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));

	if (ret) {

		ath6kl_err("Unable to send bmi done: %d\n", ret);

		return ret;

	}

	ath6kl_bmi_cleanup(ar);

	return 0;

}

int ath6kl_bmi_get_target_info(struct ath6kl *ar,

			       struct ath6kl_bmi_target_info *targ_info)

{

	int ret;

	u32 cid = BMI_GET_TARGET_INFO;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));

	if (ret) {

		ath6kl_err("Unable to send get target info: %d\n", ret);

		return ret;

	}

	ret = ath6kl_bmi_recv_buf(ar, (u8 *)&targ_info->version,

			sizeof(targ_info->version), true);

	if (ret) {

		ath6kl_err("Unable to recv target info: %d\n", ret);

		return ret;

	}

	if (le32_to_cpu(targ_info->version) == TARGET_VERSION_SENTINAL) {

		/* Determine how many bytes are in the Target's targ_info */

		ret = ath6kl_bmi_recv_buf(ar,

				   (u8 *)&targ_info->byte_count,

				   sizeof(targ_info->byte_count),

				   true);

		if (ret) {

			ath6kl_err("unable to read target info byte count: %d\n",

				   ret);

			return ret;

		}

		/*

		 * The target's targ_info doesn't match the host's targ_info.

		 * We need to do some backwards compatibility to make this work.

		 */

		if (le32_to_cpu(targ_info->byte_count) != sizeof(*targ_info)) {

			WARN_ON(1);

			return -EINVAL;

		}

		/* Read the remainder of the targ_info */

		ret = ath6kl_bmi_recv_buf(ar,

				   ((u8 *)targ_info) +

				   sizeof(targ_info->byte_count),

				   sizeof(*targ_info) -

				   sizeof(targ_info->byte_count),

				   true);

		if (ret) {

			ath6kl_err("Unable to read target info (%d bytes): %d\n",

				   targ_info->byte_count, ret);

			return ret;

		}

	}

	ath6kl_dbg(ATH6KL_DBG_BMI, "target info (ver: 0x%x type: 0x%x)\n",

		targ_info->version, targ_info->type);

	return 0;

}

int ath6kl_bmi_read(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)

{

	u32 cid = BMI_READ_MEMORY;

	int ret;

	u32 offset;

	u32 len_remain, rx_len;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = BMI_DATASZ_MAX + sizeof(cid) + sizeof(addr) + sizeof(len);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI,

		   "bmi read memory: device: addr: 0x%x, len: %d\n",

		   addr, len);

	len_remain = len;

	while (len_remain) {

		rx_len = (len_remain < BMI_DATASZ_MAX) ?

					len_remain : BMI_DATASZ_MAX;

		offset = 0;

		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

		offset += sizeof(cid);

		memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

		offset += sizeof(addr);

		memcpy(&(ar->bmi.cmd_buf[offset]), &rx_len, sizeof(rx_len));

		offset += sizeof(len);

		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

		if (ret) {

			ath6kl_err("Unable to write to the device: %d\n",

				   ret);

			return ret;

		}

		ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, rx_len, true);

		if (ret) {

			ath6kl_err("Unable to read from the device: %d\n",

				   ret);

			return ret;

		}

		memcpy(&buf[len - len_remain], ar->bmi.cmd_buf, rx_len);

		len_remain -= rx_len; addr += rx_len;

	}

	return 0;

}

int ath6kl_bmi_write(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)

{

	u32 cid = BMI_WRITE_MEMORY;

	int ret;

	u32 offset;

	u32 len_remain, tx_len;

	const u32 header = sizeof(cid) + sizeof(addr) + sizeof(len);

	u8 aligned_buf[BMI_DATASZ_MAX];

	u8 *src;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	if ((BMI_DATASZ_MAX + header) > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, BMI_DATASZ_MAX + header);

	ath6kl_dbg(ATH6KL_DBG_BMI,

		  "bmi write memory: addr: 0x%x, len: %d\n", addr, len);

	len_remain = len;

	while (len_remain) {

		src = &buf[len - len_remain];

		if (len_remain < (BMI_DATASZ_MAX - header)) {

			if (len_remain & 3) {

				/* align it with 4 bytes */

				len_remain = len_remain +

					     (4 - (len_remain & 3));

				memcpy(aligned_buf, src, len_remain);

				src = aligned_buf;

			}

			tx_len = len_remain;

		} else {

			tx_len = (BMI_DATASZ_MAX - header);

		}

		offset = 0;

		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

		offset += sizeof(cid);

		memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

		offset += sizeof(addr);

		memcpy(&(ar->bmi.cmd_buf[offset]), &tx_len, sizeof(tx_len));

		offset += sizeof(tx_len);

		memcpy(&(ar->bmi.cmd_buf[offset]), src, tx_len);

		offset += tx_len;

		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

		if (ret) {

			ath6kl_err("Unable to write to the device: %d\n",

				   ret);

			return ret;

		}

		len_remain -= tx_len; addr += tx_len;

	}

	return 0;

}

int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param)

{

	u32 cid = BMI_EXECUTE;

	int ret;

	u32 offset;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = sizeof(cid) + sizeof(addr) + sizeof(param);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi execute: addr: 0x%x, param: %d)\n",

		   addr, *param);

	offset = 0;

	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

	offset += sizeof(cid);

	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

	offset += sizeof(addr);

	memcpy(&(ar->bmi.cmd_buf[offset]), param, sizeof(*param));

	offset += sizeof(*param);

	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

	if (ret) {

		ath6kl_err("Unable to write to the device: %d\n", ret);

		return ret;

	}

	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param), false);

	if (ret) {

		ath6kl_err("Unable to read from the device: %d\n", ret);

		return ret;

	}

	memcpy(param, ar->bmi.cmd_buf, sizeof(*param));

	return 0;

}

int ath6kl_bmi_set_app_start(struct ath6kl *ar, u32 addr)

{

	u32 cid = BMI_SET_APP_START;

	int ret;

	u32 offset;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = sizeof(cid) + sizeof(addr);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi set app start: addr: 0x%x\n", addr);

	offset = 0;

	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

	offset += sizeof(cid);

	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

	offset += sizeof(addr);

	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

	if (ret) {

		ath6kl_err("Unable to write to the device: %d\n", ret);

		return ret;

	}

	return 0;

}

int ath6kl_bmi_reg_read(struct ath6kl *ar, u32 addr, u32 *param)

{

	u32 cid = BMI_READ_SOC_REGISTER;

	int ret;

	u32 offset;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = sizeof(cid) + sizeof(addr);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi read SOC reg: addr: 0x%x\n", addr);

	offset = 0;

	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

	offset += sizeof(cid);

	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

	offset += sizeof(addr);

	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

	if (ret) {

		ath6kl_err("Unable to write to the device: %d\n", ret);

		return ret;

	}

	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param), true);

	if (ret) {

		ath6kl_err("Unable to read from the device: %d\n", ret);

		return ret;

	}

	memcpy(param, ar->bmi.cmd_buf, sizeof(*param));

	return 0;

}

int ath6kl_bmi_reg_write(struct ath6kl *ar, u32 addr, u32 param)

{

	u32 cid = BMI_WRITE_SOC_REGISTER;

	int ret;

	u32 offset;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = sizeof(cid) + sizeof(addr) + sizeof(param);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI,

		   "bmi write SOC reg: addr: 0x%x, param: %d\n",

		    addr, param);

	offset = 0;

	memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

	offset += sizeof(cid);

	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));

	offset += sizeof(addr);

	memcpy(&(ar->bmi.cmd_buf[offset]), &param, sizeof(param));

	offset += sizeof(param);

	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

	if (ret) {

		ath6kl_err("Unable to write to the device: %d\n", ret);

		return ret;

	}

	return 0;

}

int ath6kl_bmi_lz_data(struct ath6kl *ar, u8 *buf, u32 len)

{

	u32 cid = BMI_LZ_DATA;

	int ret;

	u32 offset;

	u32 len_remain, tx_len;

	const u32 header = sizeof(cid) + sizeof(len);

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = BMI_DATASZ_MAX + header;

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI, "bmi send LZ data: len: %d)\n",

		   len);

	len_remain = len;

	while (len_remain) {

		tx_len = (len_remain < (BMI_DATASZ_MAX - header)) ?

			  len_remain : (BMI_DATASZ_MAX - header);

		offset = 0;

		memcpy(&(ar->bmi.cmd_buf[offset]), &cid, sizeof(cid));

		offset += sizeof(cid);

		memcpy(&(ar->bmi.cmd_buf[offset]), &tx_len, sizeof(tx_len));

		offset += sizeof(tx_len);

		memcpy(&(ar->bmi.cmd_buf[offset]), &buf[len - len_remain],

			tx_len);

		offset += tx_len;

		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);

		if (ret) {

			ath6kl_err("Unable to write to the device: %d\n",

				   ret);

			return ret;

		}

		len_remain -= tx_len;

	}

	return 0;

}

int ath6kl_bmi_lz_stream_start(struct ath6kl *ar, u32 addr)

{

	u32 cid = BMI_LZ_STREAM_START;

	int ret;

	u32 offset;

	u16 size;

	if (ar->bmi.done_sent) {

		ath6kl_err("bmi done sent already, cmd %d disallowed\n", cid);

		return -EACCES;

	}

	size = sizeof(cid) + sizeof(addr);

	if (size > MAX_BMI_CMDBUF_SZ) {

		WARN_ON(1);

		return -EINVAL;

	}

	memset(ar->bmi.cmd_buf, 0, size);

	ath6kl_dbg(ATH6KL_DBG_BMI,