Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 38382a08 authored by Tanvi Aggarwal's avatar Tanvi Aggarwal Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add AF support for rear aux camera on msm8953 



Adding new eeprom node to support focus for back aux
camera node 1 on msm8953 CDP.

Change-Id: I0bfd4e6f0e62e5832bf5eb346d9c5c7e9f11d65a
CRs-Fixed: 1103372
Signed-off-by: default avatarTanvi Aggarwal <tanvia@codeaurora.org>
parent 67ca95e6

arch/arm/boot/dts/qcom/msm8953-camera-sensor-cdp.dtsi

+38 −0
Original line number Diff line number Diff line
@@ -85,6 +85,42 @@ 
		qcom,clock-rates = <19200000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		qcom,cci-master = <1>;

		reg = <0x2>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vaf-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

					"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 131 0>,

			<&tlmm 132 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <19200000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";
@@ -141,6 +177,8 @@ 
		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom2>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;