[IA64] Manual merge fix for 3 files

  <chapter id="pubfunctions">

     <title>Public Functions Provided</title>

!Earch/i386/kernel/mca.c

!Edrivers/mca/mca-legacy.c

  </chapter>

  <chapter id="dmafunctions">

it will send the proper IPMI commands to do this.  This is supported on

several platforms.

There is a module parameter named "poweroff_control" that may either be zero

(do a power down) or 2 (do a power cycle, power the system off, then power

it on in a few seconds).  Setting ipmi_poweroff.poweroff_control=x will do

the same thing on the kernel command line.  The parameter is also available

via the proc filesystem in /proc/ipmi/poweroff_control.  Note that if the

system does not support power cycling, it will always to the power off.

There is a module parameter named "poweroff_powercycle" that may

either be zero (do a power down) or non-zero (do a power cycle, power

the system off, then power it on in a few seconds).  Setting

ipmi_poweroff.poweroff_control=x will do the same thing on the kernel

command line.  The parameter is also available via the proc filesystem

in /proc/sys/dev/ipmi/poweroff_powercycle.  Note that if the system

does not support power cycling, it will always do the power off.

Note that if you have ACPI enabled, the system will prefer using ACPI to

power off.

Using RCU to Protect Dynamic NMI Handlers

Although RCU is usually used to protect read-mostly data structures,

it is possible to use RCU to provide dynamic non-maskable interrupt

handlers, as well as dynamic irq handlers.  This document describes

how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer

work in "arch/i386/oprofile/nmi_timer_int.c" and in

"arch/i386/kernel/traps.c".

The relevant pieces of code are listed below, each followed by a

brief explanation.

	static int dummy_nmi_callback(struct pt_regs *regs, int cpu)

	{

		return 0;

	}

The dummy_nmi_callback() function is a "dummy" NMI handler that does

nothing, but returns zero, thus saying that it did nothing, allowing

the NMI handler to take the default machine-specific action.

	static nmi_callback_t nmi_callback = dummy_nmi_callback;

This nmi_callback variable is a global function pointer to the current

NMI handler.

	fastcall void do_nmi(struct pt_regs * regs, long error_code)

	{

		int cpu;

		nmi_enter();

		cpu = smp_processor_id();

		++nmi_count(cpu);

		if (!rcu_dereference(nmi_callback)(regs, cpu))

			default_do_nmi(regs);

		nmi_exit();

	}

The do_nmi() function processes each NMI.  It first disables preemption

in the same way that a hardware irq would, then increments the per-CPU

count of NMIs.  It then invokes the NMI handler stored in the nmi_callback

function pointer.  If this handler returns zero, do_nmi() invokes the

default_do_nmi() function to handle a machine-specific NMI.  Finally,

preemption is restored.

Strictly speaking, rcu_dereference() is not needed, since this code runs

only on i386, which does not need rcu_dereference() anyway.  However,

it is a good documentation aid, particularly for anyone attempting to

do something similar on Alpha.

Quick Quiz:  Why might the rcu_dereference() be necessary on Alpha,

	     given that the code referenced by the pointer is read-only?

Back to the discussion of NMI and RCU...

	void set_nmi_callback(nmi_callback_t callback)

	{

		rcu_assign_pointer(nmi_callback, callback);

	}

The set_nmi_callback() function registers an NMI handler.  Note that any

data that is to be used by the callback must be initialized up -before-

the call to set_nmi_callback().  On architectures that do not order

writes, the rcu_assign_pointer() ensures that the NMI handler sees the

initialized values.

	void unset_nmi_callback(void)

	{

		rcu_assign_pointer(nmi_callback, dummy_nmi_callback);

	}

This function unregisters an NMI handler, restoring the original

dummy_nmi_handler().  However, there may well be an NMI handler

currently executing on some other CPU.  We therefore cannot free

up any data structures used by the old NMI handler until execution

of it completes on all other CPUs.

One way to accomplish this is via synchronize_sched(), perhaps as

follows:

	unset_nmi_callback();

	synchronize_sched();

	kfree(my_nmi_data);

This works because synchronize_sched() blocks until all CPUs complete

any preemption-disabled segments of code that they were executing.

Since NMI handlers disable preemption, synchronize_sched() is guaranteed

not to return until all ongoing NMI handlers exit.  It is therefore safe

to free up the handler's data as soon as synchronize_sched() returns.

Answer to Quick Quiz

	Why might the rcu_dereference() be necessary on Alpha, given

	that the code referenced by the pointer is read-only?

	Answer: The caller to set_nmi_callback() might well have

		initialized some data that is to be used by the

		new NMI handler.  In this case, the rcu_dereference()

		would be needed, because otherwise a CPU that received

		an NMI just after the new handler was set might see

		the pointer to the new NMI handler, but the old

		pre-initialized version of the handler's data.

		More important, the rcu_dereference() makes it clear

		to someone reading the code that the pointer is being

		protected by RCU.

to retrieve it.

Note: Use cmdline "acpi_generic_hotkey" to over-ride

loading any platform specific drivers.

platform-specific with generic driver.

Porfiri Claudio <C.Porfiri@nisms.tei.ericsson.se> for patches

to make the driver work with the older CDU-510/515 series, and

Heiko Eissfeldt <heiko@colossus.escape.de> for pointing out that

the verify_area() checks were ignoring the results of said checks.

the verify_area() checks were ignoring the results of said checks

(note: verify_area() has since been replaced by access_ok()).

(Acknowledgments from Ron Jeppesen in the 0.3 release:)

Thanks to Corey Minyard who wrote the original CDU-31A driver on which