[ARM] SMDK6410: Add support for SMSC9115 ethernet controller (3056ea0a) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/mach-s3c6410/mach-smdk6410.c

+35 −0

Original line number	Diff line number	Diff line
		@@ -24,6 +24,7 @@
		#include <linux/fb.h>
		#include <linux/gpio.h>
		#include <linux/delay.h>
		#include <linux/smsc911x.h>

		#include <video/platform_lcd.h>

		@@ -44,6 +45,7 @@
		#include <plat/regs-sys.h>
		#include <plat/iic.h>
		#include <plat/fb.h>
		#include <plat/gpio-cfg.h>

		#include <plat/s3c6410.h>
		#include <plat/clock.h>
		@@ -132,6 +134,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
		.vidcon1 = VIDCON1_INV_HSYNC \| VIDCON1_INV_VSYNC,
		};

		static struct resource smdk6410_smsc911x_resources[] = {
		[0] = {
		.start = 0x18000000,
		.end = 0x18000000 + SZ_64K - 1,
		.flags = IORESOURCE_MEM,
		},
		[1] = {
		.start = S3C_EINT(10),
		.end = S3C_EINT(10),
		.flags = IORESOURCE_IRQ \| IRQ_TYPE_LEVEL_LOW,
		},
		};

		static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
		.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
		.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
		.flags = SMSC911X_USE_32BIT \| SMSC911X_FORCE_INTERNAL_PHY,
		.phy_interface = PHY_INTERFACE_MODE_MII,
		};


		static struct platform_device smdk6410_smsc911x = {
		.name = "smsc911x",
		.id = -1,
		.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
		.resource = &smdk6410_smsc911x_resources[0],
		.dev = {
		.platform_data = &smdk6410_smsc911x_pdata,
		},
		};

		static struct map_desc smdk6410_iodesc[] = {};

		static struct platform_device *smdk6410_devices[] __initdata = {
		@@ -145,6 +178,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
		&s3c_device_i2c1,
		&s3c_device_fb,
		&smdk6410_lcd_powerdev,

		&smdk6410_smsc911x,
		};

		static struct i2c_board_info i2c_devs0[] __initdata = {