Merge "ARM: dts: msm: Add dts for APQ8009 pm660 WTP" (2aefa515) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/Makefile

+2 −1

Original line number	Diff line number	Diff line
		@@ -326,10 +326,11 @@ dtb-$(CONFIG_ARCH_MSM8909) += msm8909-pm8916-mtp.dtb \
		apq8009w-1gb-nowgr-swoctp-circpanel.dtb \
		msm8909w-bg-wtp-v1.dtb \
		msm8909w-bg-wtp-v2.dtb \
		msm8909w-wtp-v1.dtb \
		msm8909w-wtp-pm660-v2k.dtb \
		apq8009w-bg-wtp-v1.dtb \
		apq8009w-bg-wtp-v2.dtb \
		apq8009w-bg-alpha.dtb \
		apq8009w-wtp-pm660-v2k.dtb \
		apq8009-mtp-wcd9326.dtb \
		msm8909-mtp-wcd9326.dtb \
		msm8909-mtp-wcd9326-refboard.dtb \

arch/arm/boot/dts/qcom/apq8009w-wtp-pm660-v2k.dts

0 → 100644

+302 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2018, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		/dts-v1/;

		#include "msm8909-mtp.dtsi"
		#include "msm8909w-gpu.dtsi"
		#include "msm8909w.dtsi"
		#include "apq8009w-memory.dtsi"
		#include "msm8909w-pm660-mtp.dtsi"
		#include "msm8909w-pm660-camera.dtsi"
		#include "msm8909w-pm660-camera-sensor-wtp-v1.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. APQ8009W-PM660 WTP V2K";
		compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp";
		qcom,msm-id = <265 0>,
		<301 0>;
		qcom,board-id = <8 0x112>;
		qcom,pmic-id = <0x0001001b 0x0 0x0 0x0>,
		<0x0001011b 0x0 0x0 0x0>;
		};

		&soc {
		i2c@78b7000 { /* BLSP1 QUP3 */
		synaptics@20 {
		compatible = "synaptics,dsx-i2c";
		reg = <0x20>;
		interrupt-parent = <&msm_gpio>;
		interrupts = <98 0x2008>;
		vdd_ana-supply = <&pm660_l18>;
		vcc_i2c-supply = <&pm660_l13>;
		synaptics,pwr-reg-name = "vdd_ana";
		synaptics,bus-reg-name = "vcc_i2c";
		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
		"pmx_ts_release";
		pinctrl-0 = <&ts_int_active &ts_reset_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&ts_release>;
		synaptics,irq-gpio = <&msm_gpio 98 0x2008>;
		synaptics,irq-on-state = <0>;
		synaptics,irq-flags = <0x2008>;
		synaptics,power-delay-ms = <200>;
		synaptics,max-y-for-2d = <389>;
		synaptics,wakeup-gestures-en = <1>;
		synaptics,resume-in-workqueue;
		synaptics,x-flip;
		synaptics,y-flip;

		synaptics,reset-gpio = <&msm_gpio 31 0x0>;
		synaptics,reset-delay-ms = <200>;
		synaptics,reset-on-state = <0>;
		synaptics,reset-active-ms = <20>;
		/delete-property/ synaptics,display-coords;
		/delete-property/ synaptics,panel-coords;
		/delete-property/ synaptics,power-down;
		/delete-property/ synaptics,disable-gpios;
		/delete-property/ synaptics,is_wake;
		};

		/delete-node/ it7260@46;
		};

		spi@78b8000 { /* BLSP1 QUP4 */
		status = "ok";
		};

		qcom,msm-ssc-sensors {
		compatible = "qcom,msm-ssc-sensors";
		};

		qcom,msm-thermal {
		vdd-dig-supply = <&pm660_s2_floor_corner>;

		msm_thermal_freq: qcom,vdd-apps-rstr {
		qcom,vdd-rstr-reg = "vdd-apps";
		qcom,levels = <1094400>;
		qcom,freq-req;
		};
		};

		qcom,bcl {
		compatible = "qcom,bcl";
		qcom,bcl-enable;
		qcom,bcl-framework-interface;
		qcom,bcl-freq-control-list = <&CPU0 &CPU1 &CPU2 &CPU3>;
		qcom,bcl-hotplug-list = <&CPU2 &CPU3>;
		qcom,bcl-soc-hotplug-list = <&CPU2 &CPU3>;
		qcom,ibat-monitor {
		qcom,low-threshold-uamp = <1000000>;
		qcom,high-threshold-uamp = <2000000>;
		qcom,mitigation-freq-khz = <1094400>;
		qcom,vph-high-threshold-uv = <3500000>;
		qcom,vph-low-threshold-uv = <3200000>;
		qcom,soc-low-threshold = <10>;
		qcom,thermal-handle = <&msm_thermal_freq>;
		};
		};

		msm_digital_codec: msm-dig-codec@771c000 {
		compatible = "qcom,msm-digital-codec";
		reg = <0x0771c000 0x0>;

		cdc-vdd-digital-supply = <&pm660_l11>;
		qcom,cdc-vdd-digital-voltage = <1800000 1800000>;
		qcom,cdc-vdd-digital-current = <5000>;
		qcom,cdc-on-demand-supplies = "cdc-vdd-digital";

		qcom,subsys-name = "modem";
		};
		};

		&qcom_seecom {
		reg = <0x87b00000 0x100000>;
		reg-names = "secapp-region";
		status = "okay";
		};

		&modem_adsp_mem {
		reg = <0x0 0x88000000 0x0 0x05600000>;
		};

		&peripheral_mem {
		reg = <0x0 0x8d600000 0x0 0x0600000>;
		};

		&i2c_1 {
		status = "disabled";
		};

		&spi_0 {
		status = "disabled";
		};

		&i2c_4 {
		status = "disabled";
		};

		&i2c_2 {
		status = "okay";
		nq@28 {
		compatible = "qcom,nq-nci";
		reg = <0x28>;
		qcom,nq-irq = <&msm_gpio 50 0x00>;
		qcom,nq-ven = <&msm_gpio 52 0x00>;
		qcom,nq-firm = <&msm_gpio 38 0x00>;
		qcom,nq-esepwr = <&msm_gpio 49 0x00>;
		qcom,nq-clkreq = <&pm660_gpios 4 0x00>;
		qcom,clk-src = "BBCLK3";
		interrupt-parent = <&msm_gpio>;
		interrupts = <50 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active","nfc_suspend";
		pinctrl-0 = <&nfcw_int_active &nfcv2k_disable_active>;
		pinctrl-1 = <&nfcw_int_suspend &nfcv2k_disable_suspend>;
		clocks = <&clock_rpm clk_bb_clk3_pin>;
		clock-names = "ref_clk";
		};
		};

		&i2c_5 {
		status = "disabled";
		};

		&sdhc_2 {
		status = "disabled";
		};

		&blsp1_uart1 {
		status = "disabled";
		};

		&blsp1_uart2 {
		status = "ok";
		pinctrl-names = "default";
		pinctrl-0 = <&uart_console2_sleep>;
		};

		/* Pinctrl dt nodes for interrupt & reset gpio for Synaptics touch controller */
		&ts_int_active {
		mux {
		pins = "gpio98";
		};

		config {
		pins = "gpio98";
		};
		};

		&ts_int_suspend {
		mux {
		pins = "gpio98";
		};

		config {
		pins = "gpio98";
		};
		};

		&ts_reset_active {
		mux {
		pins = "gpio31";
		};

		config {
		pins = "gpio31";
		};
		};

		&ts_reset_suspend {
		mux {
		pins = "gpio31";
		};

		config {
		pins = "gpio31";
		};
		};

		&ts_release {
		mux {
		pins = "gpio98", "gpio31";
		};

		config {
		pins = "gpio98", "gpio31";
		};
		};

		&system_fstab {
		fsmgr_flags = "wait";
		};

		&vendor_fstab {
		fsmgr_flags = "wait";
		};

		&mdss_dsi0{
		qcom,dsi-pref-prim-pan = <&dsi_auo_390p_cmd>;
		qcom,platform-bklight-en-gpio = <&msm_gpio 37 0>;
		};

		&dai_mi2s3 {
		qcom,msm-mi2s-rx-lines = <1>;
		qcom,msm-mi2s-tx-lines = <2>;
		};

		&audio_codec_mtp {
		compatible = "qcom,msm8909-audio-codec";
		qcom,model = "msm8909w-wtp-snd-card";
		qcom,msm-ext-pa = "quaternary";
		/delete-property/qcom,split-a2dp;
		qcom,audio-routing =
		"CDC_CONN", "MCLK",
		"QUAT_MI2S_RX", "DIGIT_REGULATOR",
		"TX_I2S_CLK", "DIGIT_REGULATOR",
		"DMIC1", "Digital Mic1",
		"DMIC2", "Digital Mic2";
		qcom,msm-gpios =
		"quat_i2s",
		"dmic";
		qcom,pinctrl-names =
		"all_off",
		"quat_i2s_act",
		"dmic_act",
		"quat_i2s_dmic_act";
		pinctrl-names =
		"all_off",
		"quat_i2s_act",
		"dmic_act",
		"quat_i2s_dmic_act";
		pinctrl-0 = <&quat_mi2s_sleep &quat_mi2s_din_sleep
		&cdc_dmic0_clk_sus &cdc_dmic0_data_sus>;
		pinctrl-1 = <&quat_mi2s_active &quat_mi2s_din_active
		&cdc_dmic0_clk_sus &cdc_dmic0_data_sus>;
		pinctrl-2 = <&quat_mi2s_sleep &quat_mi2s_din_sleep
		&cdc_dmic0_clk_act &cdc_dmic0_data_act>;
		pinctrl-3 = <&quat_mi2s_active &quat_mi2s_din_active
		&cdc_dmic0_clk_act &cdc_dmic0_data_act>;
		/delete-property/qcom,cdc-us-euro-gpios;

		asoc-codec = <&stub_codec>, <&msm_digital_codec>;
		asoc-codec-names = "msm-stub-codec.1", "msm-dig-codec";
		};

		&led_flash0{
		status = "disabled";
		};

		&actuator0{
		status = "disabled";
		};

arch/arm/boot/dts/qcom/msm8909w-wtp-v1.dts→arch/arm/boot/dts/qcom/msm8909w-wtp-pm660-v2k.dts

+1 −1

Original line number	Diff line number	Diff line
		@@ -23,7 +23,7 @@
		#include "spi-panel-st7789v2-qvga-cmd.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. MSM8909W-PM660 V1 WTP";
		model = "Qualcomm Technologies, Inc. MSM8909W-PM660 WTP V2K";
		compatible = "qcom,msm8909-mtp", "qcom,msm8909", "qcom,mtp";
		qcom,msm-id = <245 0>,
		<258 0>,