Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2a7fade7 authored by Samu Onkalo's avatar Samu Onkalo Committed by Guenter Roeck
Browse files

hwmon: lis3: Power on corrections 



Sometimes lis3 chip seems to fail to setup factory tuning at boot up.
This probably happens if there is some odd power ramp down ramp up sequence
for example in device restart. Set boot bit in control2 register to
trig boot sequence manually and wait until it is finished.

Signed-off-by: default avatarSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Acked-by: default avatarEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
parent 821f6646

drivers/hwmon/lis3lv02d.c

+11 −8
Original line number Original line Diff line number Diff line
@@ -307,19 +307,22 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3) 




	lis3->init(lis3);

	lis3->init(lis3);





	/* LIS3 power on delay is quite long */

	msleep(lis3->pwron_delay / lis3lv02d_get_odr());



	/*

	/*

	 * Common configuration

	 * Common configuration

	 * BDU: (12 bits sensors only) LSB and MSB values are not updated until

	 * BDU: (12 bits sensors only) LSB and MSB values are not updated until

	 *      both have been read. So the value read will always be correct.

	 *      both have been read. So the value read will always be correct.

	 * Set BOOT bit to refresh factory tuning values.

	 */

	 */

	if (lis3->whoami ==  WAI_12B) {

	lis3->read(lis3, CTRL_REG2, &reg);

	lis3->read(lis3, CTRL_REG2, &reg);

		reg |= CTRL2_BDU;

	if (lis3->whoami ==  WAI_12B)

		reg |= CTRL2_BDU | CTRL2_BOOT;

	else

		reg |= CTRL2_BOOT_8B;

	lis3->write(lis3, CTRL_REG2, reg);

	lis3->write(lis3, CTRL_REG2, reg);

	}



	/* LIS3 power on delay is quite long */

	msleep(lis3->pwron_delay / lis3lv02d_get_odr());



	if (lis3->reg_ctrl)

	if (lis3->reg_ctrl)

		lis3_context_restore(lis3);

		lis3_context_restore(lis3);

}

}

drivers/hwmon/lis3lv02d.h

+1 −0
Original line number Original line Diff line number Diff line
@@ -150,6 +150,7 @@ enum lis3lv02d_ctrl4_3dc { 
enum lis302d_ctrl2 {

enum lis302d_ctrl2 {

	HP_FF_WU2	= 0x08,

	HP_FF_WU2	= 0x08,

	HP_FF_WU1	= 0x04,

	HP_FF_WU1	= 0x04,

	CTRL2_BOOT_8B   = 0x40,

};

};





enum lis3lv02d_ctrl3 {

enum lis3lv02d_ctrl3 {