Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1cceb5c6 authored by Tanya Finkel's avatar Tanya Finkel Committed by Liron Kuch
Browse files

ARM: dts: apq: Add APQ8096 Dragonboard device support 



Add the necessary device tree files to support the
APQ-8096 based Dragonboard platform.

Change-Id: I185d921543c7e68a89f8226ea8f9cf7ba58482d7
Signed-off-by: default avatarLiron Kuch <lkuch@codeaurora.org>
Signed-off-by: default avatarTanya Finkel <tfinkel@codeaurora.org>
parent 34f0b490

Documentation/devicetree/bindings/arm/msm/msm.txt

+1 −0
Original line number Diff line number Diff line
@@ -141,6 +141,7 @@ compatible = "qcom,apq8094-fluid" 
compatible = "qcom,apq8094-liquid"

compatible = "qcom,apq8094-mtp"

compatible = "qcom,apq8094-dragonboard"

compatible = "qcom,apq8096-dragonboard"

compatible = "qcom,apq8096-liquid"

compatible = "qcom,mdm9630-cdp"

compatible = "qcom,mdm9630-mtp"

Documentation/devicetree/bindings/vendor-prefixes.txt

+1 −0
Original line number Diff line number Diff line
@@ -165,6 +165,7 @@ spansion Spansion Inc. 
st	STMicroelectronics

ste	ST-Ericsson

stericsson	ST-Ericsson

synaptics	Synaptics, Inc.

synology	Synology, Inc.

thine	THine Electronics, Inc.

ti	Texas Instruments

arch/arm/boot/dts/qcom/Makefile

+3 −1
Original line number Diff line number Diff line
@@ -40,7 +40,9 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-sim.dtb \ 
	msm8996-v2.0-fluid.dtb \

	msm8996-v2.0-liquid.dtb \

	apq8096-v2-liquid.dtb \

	apq8096-v3-liquid.dtb

	apq8096-v3-liquid.dtb \

	apq8096-v2-dragonboard.dtb \

	apq8096-v3-dragonboard.dtb



dtb-$(CONFIG_ARCH_MSMCOBALT) += msmcobalt-sim.dtb

arch/arm/boot/dts/qcom/apq8096-camera-sensor-dragonboard.dtsi

0 → 100644
+255 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015 The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/*

 * Note: default configuration is for the camera modules to be powered

 * by the PMIC from the CSI connector. Alternative configuration is for

 * self-powered camera modules.

 */

&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8994_l23>;

		/* cam_vaf-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm8994_l23>;

		/* cam_vaf-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		qcom,eeprom-name = "onsemi_cat24c32";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <0>;

		qcom,num-blocks = <1>;

		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <2245 0x00 2 0 1 0>;

		cam_vio-supply = <&pm8994_lvs1>;

		/* cam_vio-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		qcom,eeprom-name = "onsemi_cat24c16";

		compatible = "qcom,eeprom";

		qcom,slave-addr = <0xa0>;

		qcom,cci-master = <1>;

		qcom,num-blocks = <7>;



		qcom,page0 = <0 0 0 0 0 0>;

		qcom,poll0 = <0 0 0 0 0 0>;

		qcom,saddr0 = <0xa0>;

		qcom,mem0 = <256 0x00 1 0 1 0>;



		qcom,page1 = <0 0 0 0 0 0>;

		qcom,poll1 = <0 0 0 0 0 0>;

		qcom,saddr1 = <0xa2>;

		qcom,mem1 = <256 0x00 1 0 1 0>;



		qcom,page2 = <0 0 0 0 0 0>;

		qcom,poll2 = <0 0 0 0 0 0>;

		qcom,saddr2 = <0xa4>;

		qcom,mem2 = <256 0x00 1 0 1 0>;



		qcom,page3 = <0 0 0 0 0 0>;

		qcom,poll3 = <0 0 0 0 0 0>;

		qcom,saddr3 = <0xa6>;

		qcom,mem3 = <256 0x00 1 0 1 0>;



		qcom,page4 = <0 0 0 0 0 0>;

		qcom,poll4 = <0 0 0 0 0 0>;

		qcom,saddr4 = <0xa8>;

		qcom,mem4 = <256 0x00 1 0 1 0>;



		qcom,page5 = <0 0 0 0 0 0>;

		qcom,poll5 = <0 0 0 0 0 0>;

		qcom,saddr5 = <0xaa>;

		qcom,mem5 = <256 0x00 1 0 1 0>;



		qcom,page6 = <0 0 0 0 0 0>;

		qcom,poll6 = <0 0 0 0 0 0>;

		qcom,saddr6 = <0xac>;

		qcom,mem6 = <254 0x00 1 0 1 0>;



		cam_vio-supply = <&pm8994_lvs1>;

		/* cam_vio-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vio";

		qcom,cam-vreg-min-voltage = <0>;

		qcom,cam-vreg-max-voltage = <0>;

		qcom,cam-vreg-op-mode = <0>;

		qcom,cam-power-seq-type = "sensor_vreg";

		qcom,cam-power-seq-val = "cam_vio";

		qcom,cam-power-seq-cfg-val = <1>;

		qcom,cam-power-seq-delay = <1>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <0>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vdig-supply = <&vph_pwr_vreg>;

		/* Cameras powered by PMIC: */

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l17>;

		/* Self-powered cameras: */

		/* cam_vio-supply = <&vph_pwr_vreg>; */

		/* cam_vana-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-max-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active &cam_csi0_sensor_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_csi0_sensor_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 25 0>,

			<&tlmm 26 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					  "CAM_RESET0",

					  "CAM_STANDBY0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

				<&clock_mmss clk_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <0>;

		cam_vdig-supply = <&vph_pwr_vreg>;

		/* Cameras powered by PMIC: */

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l18>;

		/* Self-powered cameras: */

		/* cam_vio-supply = <&vph_pwr_vreg>; */

		/* cam_vana-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 3150000>;

		qcom,cam-vreg-max-voltage = <1000000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active &cam_csi1_sensor_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_csi1_sensor_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 104 0>,

			<&tlmm 98 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1",

					  "CAM_STANDBY1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <0>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		/* Cameras powered by PMIC: */

		cam_vdig-supply = <&vph_pwr_vreg>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l29>;

		/* Self-powered cameras: */

		/* cam_vio-supply = <&vph_pwr_vreg>; */

		/* cam_vana-supply = <&vph_pwr_vreg>; */

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active &cam_csi2_sensor_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_csi2_sensor_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 23 0>,

			<&tlmm 133 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk2_clk_src>,

			<&clock_mmss clk_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/apq8096-dragonboard.dtsi

0 → 100644
+769 −0

File added.

Preview size limit exceeded, changes collapsed.