Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1b2c357c authored by Alan Cox's avatar Alan Cox Committed by Jeff Garzik
Browse files

pata_ali: force initialise a few bits 



We can't assume some of the setup here on non x86 boxes.

Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 978ff6db

drivers/ata/pata_ali.c

+38 −33
Original line number Diff line number Diff line
@@ -19,7 +19,9 @@ 
 *

 *  TODO/CHECK

 *	Cannot have ATAPI on both master & slave for rev < c2 (???) but

 *	otherwise should do atapi DMA.

 *	otherwise should do atapi DMA (For now for old we do PIO only for

 *	ATAPI)

 *	Review Sunblade workaround.

 */



#include <linux/kernel.h>
@@ -33,12 +35,14 @@ 
#include <linux/dmi.h>



#define DRV_NAME "pata_ali"

#define DRV_VERSION "0.7.5"

#define DRV_VERSION "0.7.7"



static int ali_atapi_dma = 0;

module_param_named(atapi_dma, ali_atapi_dma, int, 0644);

MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");



static struct pci_dev *isa_bridge;



/*

 *	Cable special cases

 */
@@ -401,52 +405,49 @@ static struct ata_port_operations ali_c5_port_ops = { 
static void ali_init_chipset(struct pci_dev *pdev)

{

	u8 tmp;

	struct pci_dev *north, *isa_bridge;

	struct pci_dev *north;



	/*

	 * The chipset revision selects the driver operations and

	 * mode data.

	 */



	if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {

		/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */

	if (pdev->revision <= 0x20) {

		pci_read_config_byte(pdev, 0x53, &tmp);

		tmp |= 0x03;

		pci_write_config_byte(pdev, 0x53, tmp);

	} else {

		pci_read_config_byte(pdev, 0x4a, &tmp);

		pci_write_config_byte(pdev, 0x4a, tmp | 0x20);

		pci_read_config_byte(pdev, 0x4B, &tmp);

		if (pdev->revision < 0xC2)

			/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */

			/* Clear CD-ROM DMA write bit */

			tmp &= 0x7F;

		pci_write_config_byte(pdev, 0x4B, tmp);

	} else if (pdev->revision >= 0xC2) {

		/* Enable cable detection logic */

		pci_read_config_byte(pdev, 0x4B, &tmp);

		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);

	}

	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));

	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);



	if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {

		/* Configure the ALi bridge logic. For non ALi rely on BIOS.

		   Set the south bridge enable bit */

		pci_read_config_byte(isa_bridge, 0x79, &tmp);

		if (pdev->revision == 0xC2)

			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);

		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)

			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);

	}

	if (pdev->revision >= 0x20) {

		/* Cable and UDMA */

		pci_write_config_byte(pdev, 0x4B, tmp | 0x09);

		/*

		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want

		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control

		 * via 0x54/55.

		 */

		pci_read_config_byte(pdev, 0x53, &tmp);

		if (pdev->revision <= 0x20)

			tmp &= ~0x02;

		if (pdev->revision >= 0xc7)

			tmp |= 0x03;

		else

			tmp |= 0x01;	/* CD_ROM enable for DMA */

		pci_write_config_byte(pdev, 0x53, tmp);

	}

	pci_dev_put(isa_bridge);

	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));

	if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {

		/* Configure the ALi bridge logic. For non ALi rely on BIOS.

		   Set the south bridge enable bit */

		pci_read_config_byte(isa_bridge, 0x79, &tmp);

		if (pdev->revision == 0xC2)

			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);

		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)

			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);

	}

	pci_dev_put(north);

	ata_pci_bmdma_clear_simplex(pdev);

}
@@ -516,7 +517,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 


	const struct ata_port_info *ppi[] = { NULL, NULL };

	u8 tmp;

	struct pci_dev *isa_bridge;

	int rc;



	rc = pcim_enable_device(pdev);
@@ -543,14 +543,12 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 


	ali_init_chipset(pdev);



	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);

	if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {

		/* Are we paired with a UDMA capable chip */

		pci_read_config_byte(isa_bridge, 0x5E, &tmp);

		if ((tmp & 0x1E) == 0x12)

	        	ppi[0] = &info_20_udma;

	}

	pci_dev_put(isa_bridge);



	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);

}
@@ -590,13 +588,20 @@ static struct pci_driver ali_pci_driver = { 


static int __init ali_init(void)

{

	return pci_register_driver(&ali_pci_driver);

	int ret;

	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);



	ret = pci_register_driver(&ali_pci_driver);

	if (ret < 0)

		pci_dev_put(isa_bridge);

	return ret;

}





static void __exit ali_exit(void)

{

	pci_unregister_driver(&ali_pci_driver);

	pci_dev_put(isa_bridge);

}