Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1b00f546 authored by Juuso Oikarinen's avatar Juuso Oikarinen Committed by John W. Linville
Browse files

wl1271: Add proper WLAN-BT co-ex configuration, and enable co-ex. 



Add configuration values for the varous WLAN-BT co-ex configuration parameters,
and finally enable WLAN-BT co-ex. Based on preliminary measurements, it
appears the co-ex feature is not increasing WLAN power consumption, if BT
is not activated.

Signed-off-by: default avatarJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: default avatarTeemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 885c9907

drivers/net/wireless/wl12xx/wl1271_acx.c

+5 −4
Original line number Diff line number Diff line
@@ -547,7 +547,7 @@ int wl1271_acx_sg_enable(struct wl1271 *wl) 
		goto out;

	}



	pta->enable = ACX_SG_DISABLE;

	pta->enable = wl->conf.sg.state;



	ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));

	if (ret < 0) {
@@ -564,7 +564,7 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) 
{

	struct acx_bt_wlan_coex_param *param;

	struct conf_sg_settings *c = &wl->conf.sg;

	int ret;

	int i, ret;



	wl1271_debug(DEBUG_ACX, "acx sg cfg");
@@ -575,8 +575,9 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) 
	}



	/* BT-WLAN coext parameters */

	param->params[ACX_SG_BT_PER_THRESHOLD] = c->per_threshold;

	param->param_idx = ACX_SG_BT_PER_THRESHOLD;

	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)

		param->params[i] = c->params[i];

	param->param_idx = CONF_SG_PARAMS_ALL;



	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));

	if (ret < 0) {

drivers/net/wireless/wl12xx/wl1271_acx.h

+1 −61
Original line number Diff line number Diff line
@@ -392,12 +392,6 @@ struct acx_conn_monit_params { 
       __le32 bss_lose_timeout; /* number of TU's from synch fail */

} __attribute__ ((packed));



enum {

	ACX_SG_DISABLE = 0,

	ACX_SG_PROTECTIVE,

	ACX_SG_OPPORTUNISTIC

};



struct acx_bt_wlan_coex {

	struct acx_header header;
@@ -405,64 +399,10 @@ struct acx_bt_wlan_coex { 
	u8 pad[3];

} __attribute__ ((packed));



enum {

	ACX_SG_BT_PER_THRESHOLD = 0,

	ACX_SG_HV3_MAX_OVERRIDE,

	ACX_SG_BT_NFS_SAMPLE_INTERVAL,

	ACX_SG_BT_LOAD_RATIO,

	ACX_SG_AUTO_PS_MODE,

	ACX_SG_AUTO_SCAN_PROBE_REQ,

	ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,

	ACX_SG_ANTENNA_CONFIGURATION,

	ACX_SG_BEACON_MISS_PERCENT,

	ACX_SG_RATE_ADAPT_THRESH,

	ACX_SG_RATE_ADAPT_SNR,

	ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,

	ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,

	ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,

	ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,

	ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,

	ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,

	ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,

	ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,

	ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,

	ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,

	ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,

	ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,

	ACX_SG_RXT,

	ACX_SG_TXT,

	ACX_SG_ADAPTIVE_RXT_TXT,

	ACX_SG_PS_POLL_TIMEOUT,

	ACX_SG_UPSD_TIMEOUT,

	ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,

	ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,

	ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,

	ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,

	ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,

	ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,

	ACX_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,

	ACX_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,

	ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,

	ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,

	ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,

	ACX_SG_PASSIVE_SCAN_A2DP_BT_TIME,

	ACX_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,

	ACX_SG_HV3_MAX_SERVED,

	ACX_SG_DHCP_TIME,

	ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,

	ACX_SG_TEMP_PARAM_1,

	ACX_SG_TEMP_PARAM_2,

	ACX_SG_TEMP_PARAM_3,

	ACX_SG_TEMP_PARAM_4,

	ACX_SG_TEMP_PARAM_5,

	ACX_SG_PARAMS_MAX,

	ACX_SG_PARAMS_ALL = 0xff

};



struct acx_bt_wlan_coex_param {

	struct acx_header header;



	__le32 params[ACX_SG_PARAMS_MAX];

	__le32 params[CONF_SG_PARAMS_MAX];

	u8 param_idx;

	u8 padding[3];

} __attribute__ ((packed));

drivers/net/wireless/wl12xx/wl1271_conf.h

+269 −61
Original line number Diff line number Diff line
@@ -65,110 +65,318 @@ enum { 
	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,

};



struct conf_sg_settings {

enum {

	CONF_SG_DISABLE = 0,

	CONF_SG_PROTECTIVE,

	CONF_SG_OPPORTUNISTIC

};



enum {

	/*

	 * Defines the PER threshold in PPM of the BT voice of which reaching

	 * this value will trigger raising the priority of the BT voice by

	 * the BT IP until next NFS sample interval time as defined in

	 * nfs_sample_interval.

	 * PER threshold in PPM of the BT voice

	 *

	 * Unit: PER value in PPM (parts per million)

	 * #Error_packets / #Total_packets

	 * Range: 0 - 10000000

	 */

	CONF_SG_BT_PER_THRESHOLD = 0,



	 * Range: u32

	/*

	 * Number of consequent RX_ACTIVE activities to override BT voice

	 * frames to ensure WLAN connection

	 *

	 * Range: 0 - 100

	 */

	u32 per_threshold;

	CONF_SG_HV3_MAX_OVERRIDE,



	/*

	 * This value is an absolute time in micro-seconds to limit the

	 * maximum scan duration compensation while in SG

	 * Defines the PER threshold of the BT voice

	 *

	 * Range: 0 - 65000

	 */

	u32 max_scan_compensation_time;

	CONF_SG_BT_NFS_SAMPLE_INTERVAL,



	/* Defines the PER threshold of the BT voice of which reaching this

	 * value will trigger raising the priority of the BT voice until next

	 * NFS sample interval time as defined in sample_interval.

	/*

	 * Defines the load ratio of BT

	 *

	 * Unit: msec

	 * Range: 1-65000

	 * Range: 0 - 100 (%)

	 */

	u16 nfs_sample_interval;

	CONF_SG_BT_LOAD_RATIO,



	/*

	 * Defines the load ratio for the BT.

	 * The WLAN ratio is: 100 - load_ratio

	 * Defines whether the SG will force WLAN host to enter/exit PSM

	 *

	 * Unit: Percent

	 * Range: 0-100

	 * Range: 1 - SG can force, 0 - host handles PSM

	 */

	CONF_SG_AUTO_PS_MODE,



	/*

	 * Compensation percentage of probe requests when scan initiated

	 * during BT voice/ACL link.

	 *

	 * Range: 0 - 255 (%)

	 */

	u8 load_ratio;

	CONF_SG_AUTO_SCAN_PROBE_REQ,



	/*

	 * true - Co-ex is allowed to enter/exit P.S automatically and

	 *        transparently to the host

	 * Compensation percentage of probe requests when active scan initiated

	 * during BT voice

	 *

	 * false - Co-ex is disallowed to enter/exit P.S and will trigger an

	 *         event to the host to notify for the need to enter/exit P.S

	 *         due to BT change state

	 * Range: 0 - 255 (%)

	 */

	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,



	/*

	 * Defines antenna configuration (single/dual antenna)

	 *

	 * Range: 0 - single antenna, 1 - dual antenna

	 */

	u8 auto_ps_mode;

	CONF_SG_ANTENNA_CONFIGURATION,



	/*

	 * This parameter defines the compensation percentage of num of probe

	 * requests in case scan is initiated during BT voice/BT ACL

	 * guaranteed link.

	 * The threshold (percent) of max consequtive beacon misses before

	 * increasing priority of beacon reception.

	 *

	 * Unit: Percent

	 * Range: 0-255 (0 - No compensation)

	 * Range: 0 - 100 (%)

	 */

	u8 probe_req_compensation;

	CONF_SG_BEACON_MISS_PERCENT,



	/*

	 * This parameter defines the compensation percentage of scan window

	 * size in case scan is initiated during BT voice/BT ACL Guaranteed

	 * link.

	 * The rate threshold below which receiving a data frame from the AP

	 * will increase the priority of the data frame above BT traffic.

	 *

	 * Unit: Percent

	 * Range: 0-255 (0 - No compensation)

	 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54

	 */

	u8 scan_window_compensation;

	CONF_SG_RATE_ADAPT_THRESH,



	/*

	 * Defines the antenna configuration.

	 * Not used currently.

	 *

	 * Range: 0 - Single Antenna; 1 - Dual Antenna

	 * Range: 0

	 */

	u8 antenna_config;

	CONF_SG_RATE_ADAPT_SNR,



	/*

	 * The percent out of the Max consecutive beacon miss roaming trigger

	 * which is the threshold for raising the priority of beacon

	 * reception.

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT master basic rate

	 *

	 * Range: 1-100

	 * N = MaxConsecutiveBeaconMiss

	 * P = coexMaxConsecutiveBeaconMissPrecent

	 * Threshold = MIN( N-1, round(N * P / 100))

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT master basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT slave basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT slave basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT master EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT master EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT slave EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT slave EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,



	/*

	 * RX guard time before the beginning of a new BT voice frame during

	 * which no new WLAN trigger frame is transmitted.

	 *

	 * Range: 0 - 100000 (us)

	 */

	CONF_SG_RXT,



	/*

	 * TX guard time before the beginning of a new BT voice frame during

	 * which no new WLAN frame is transmitted.

	 *

	 * Range: 0 - 100000 (us)

	 */



	CONF_SG_TXT,



	/*

	 * Enable adaptive RXT/TXT algorithm. If disabled, the host values

	 * will be utilized.

	 *

	 * Range: 0 - disable, 1 - enable

	 */

	CONF_SG_ADAPTIVE_RXT_TXT,



	/*

	 * The used WLAN legacy service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_PS_POLL_TIMEOUT,



	/*

	 * The used WLAN UPSD service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_UPSD_TIMEOUT,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT master EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	u8 beacon_miss_threshold;

	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,



	/*

	 * The RX rate threshold below which rate adaptation is assumed to be

	 * occurring at the AP which will raise priority for ACTIVE_RX and RX

	 * SP.

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT master EDR

	 *

	 * Range: HW_BIT_RATE_*

	 * Range: 0 - 255 (ms)

	 */

	u32 rate_adaptation_threshold;

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,



	/*

	 * The SNR above which the RX rate threshold indicating AP rate

	 * adaptation is valid

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT slave EDR

	 *

	 * Range: -128 - 127

	 * Range: 0 - 255 (ms)

	 */

	s8 rate_adaptation_snr;

	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,



	/*

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT slave EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,



	/*

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,



	/*

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT voice

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,



	/*

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT A2DP

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,



	/*

	 * Fixed time ensured for BT traffic to gain the antenna during WLAN

	 * passive scan.

	 *

	 * Range: 0 - 1000 ms

	 */

	CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,



	/*

	 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN

	 * passive scan.

	 *

	 * Range: 0 - 1000 ms

	 */

	CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,



	/*

	 * Number of consequent BT voice frames not interrupted by WLAN

	 *

	 * Range: 0 - 100

	 */

	CONF_SG_HV3_MAX_SERVED,



	/*

	 * Protection time of the DHCP procedure.

	 *

	 * Range: 0 - 100000 (ms)

	 */

	CONF_SG_DHCP_TIME,



	/*

	 * Compensation percentage of WLAN active scan window if initiated

	 * during BT A2DP

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,

	CONF_SG_TEMP_PARAM_1,

	CONF_SG_TEMP_PARAM_2,

	CONF_SG_TEMP_PARAM_3,

	CONF_SG_TEMP_PARAM_4,

	CONF_SG_TEMP_PARAM_5,

	CONF_SG_PARAMS_MAX,

	CONF_SG_PARAMS_ALL = 0xff

};



struct conf_sg_settings {

	__le32 params[CONF_SG_PARAMS_MAX];

	u8 state;

};



enum conf_rx_queue_type {

drivers/net/wireless/wl12xx/wl1271_init.c

+2 −2
Original line number Diff line number Diff line
@@ -160,11 +160,11 @@ int wl1271_init_pta(struct wl1271 *wl) 
{

	int ret;



	ret = wl1271_acx_sg_enable(wl);

	ret = wl1271_acx_sg_cfg(wl);

	if (ret < 0)

		return ret;



	ret = wl1271_acx_sg_cfg(wl);

	ret = wl1271_acx_sg_enable(wl);

	if (ret < 0)

		return ret;

drivers/net/wireless/wl12xx/wl1271_main.c

+51 −11
Original line number Diff line number Diff line
@@ -48,17 +48,57 @@ 


static struct conf_drv_settings default_conf = {

	.sg = {

		.per_threshold               = 7500,

		.max_scan_compensation_time  = 120000,

		.nfs_sample_interval         = 400,

		.load_ratio                  = 50,

		.auto_ps_mode                = 0,

		.probe_req_compensation      = 170,

		.scan_window_compensation    = 50,

		.antenna_config              = 0,

		.beacon_miss_threshold       = 60,

		.rate_adaptation_threshold   = CONF_HW_BIT_RATE_12MBPS,

		.rate_adaptation_snr         = 0

		.params = {

			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,

			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,

			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,

			[CONF_SG_BT_LOAD_RATIO]                     = 50,

			[CONF_SG_AUTO_PS_MODE]                      = 0,

			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,

			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,

			[CONF_SG_BEACON_MISS_PERCENT]               = 60,

			[CONF_SG_RATE_ADAPT_THRESH]                 = 12,

			[CONF_SG_RATE_ADAPT_SNR]                    = 0,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 30,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 8,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 50,

			/* Note: with UPSD, this should be 4 */

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 8,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 20,

			/* Note: with UPDS, this should be 15 */

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,

			/* Note: with UPDS, this should be 50 */

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 40,

			/* Note: with UPDS, this should be 10 */

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 20,

			[CONF_SG_RXT]                               = 1200,

			[CONF_SG_TXT]                               = 1000,

			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,

			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,

			[CONF_SG_UPSD_TIMEOUT]                      = 10,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,

			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,

			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,

			[CONF_SG_HV3_MAX_SERVED]                    = 6,

			[CONF_SG_DHCP_TIME]                         = 5000,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,

		},

		.state = CONF_SG_PROTECTIVE,

	},

	.rx = {

		.rx_msdu_life_time           = 512000,