Merge "ARM: dts: msm: Add support for APQ8096proAU v1.1 ADP"

	msm8996pro-v1.1-pmi8996-pmk8001-cdp.dtb \

	msm8996pro-v1.1-pmi8996-pmk8001-mtp.dtb \

	apq8096pro-auto-cdp.dtb \

	apq8096pro-v1.1-auto-adp.dtb \

	apq8096pro-liquid.dtb \

	apq8096pro-v1.1-auto-cdp.dtb \

	apq8096pro-v1.1-pmi8994-cdp.dtb \

/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>

#include "apq8096pro-v1.1.dtsi"

#include "msm8996-pm8994.dtsi"

#include "msm8996-agave-adp.dtsi"

#include "msm8996pro-auto.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP";

	compatible = "qcom,apq8096-adp", "qcom,msm8996", "qcom,adp";

	qcom,msm-id = <316 0x10001>;

	qcom,board-id = <0x02010019 0>;

};

&spi_9 {

	status = "ok";

	can-controller@0 {

		compatible = "renesas,rh850";

		reg = <0>;

		interrupt-parent = <&tlmm>;

		interrupts = <122 0>;

		spi-max-frequency = <5000000>;

	};

};

&soc {

	qcom,msm-ssc-sensors {

		status = "disabled";

	};

	qcom,msm-thermal {

		qcom,hotplug-temp = <115>;

		qcom,hotplug-temp-hysteresis = <25>;

		qcom,therm-reset-temp = <119>;

	};

	qcom,adv7481@70 {

		qcom,cam-vreg-min-voltage = <1300000 0 1800000>;

		qcom,cam-vreg-max-voltage = <1300000 0 1800000>;

	};

};

&pil_modem {

	pinctrl-names = "default";

	pinctrl-0 = <&modem_mux>;

};

&slim_msm {

	status = "disabled";

};

&pm8994_mpps {

	mpp@a500 { /* MPP 6 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,vin-sel = <2>;		/* S4 1.8V */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "okay";

	};

};

&sdhc_2 {

	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off

			&sdc2_cd_on_sbc>;

};

&i2c_7 {

	silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/

		status = "disabled";

	};

};