[media] it913x-fe: Dead code remove driver

	help

	  A DVB-S tuner module. Say Y when you want to support this frontend.

config DVB_IT913X_FE

	tristate "it913x frontend and it9137 tuner"

	depends on DVB_CORE && I2C

	default m if !MEDIA_SUBDRV_AUTOSELECT

	help

	  A DVB-T tuner module.

	  Say Y when you want to support this frontend.

config DVB_M88RS2000

	tristate "M88RS2000 DVB-S demodulator and tuner"

	depends on DVB_CORE && I2C

obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o

obj-$(CONFIG_DVB_DRXK) += drxk.o

obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o

obj-$(CONFIG_DVB_IT913X_FE) += it913x-fe.o

obj-$(CONFIG_DVB_A8293) += a8293.o

obj-$(CONFIG_DVB_TDA10071) += tda10071.o

obj-$(CONFIG_DVB_RTL2830) += rtl2830.o

/*

 *  Driver for it913x Frontend

 *

 *

 *  This program is free software; you can redistribute it and/or modify

 *  it under the terms of the GNU General Public License as published by

 *  the Free Software Foundation; either version 2 of the License, or

 *  (at your option) any later version.

 *

 *  This program is distributed in the hope that it will be useful,

 *  but WITHOUT ANY WARRANTY; without even the implied warranty of

 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *

 *  GNU General Public License for more details.

 *

 *  You should have received a copy of the GNU General Public License

 *  along with this program; if not, write to the Free Software

 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=

 */

#ifndef IT913X_FE_H

#define IT913X_FE_H

#include <linux/kconfig.h>

#include <linux/dvb/frontend.h>

#include "dvb_frontend.h"

struct ite_config {

	u8 chip_ver;

	u16 chip_type;

	u32 firmware;

	u8 firmware_ver;

	u8 adc_x2;

	u8 tuner_id_0;

	u8 tuner_id_1;

	u8 dual_mode;

	u8 adf;

	/* option to read SIGNAL_LEVEL */

	u8 read_slevel;

};

#if IS_ENABLED(CONFIG_DVB_IT913X_FE)

extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap,

			u8 i2c_addr, struct ite_config *config);

#else

static inline struct dvb_frontend *it913x_fe_attach(

		struct i2c_adapter *i2c_adap,

			u8 i2c_addr, struct ite_config *config)

{

	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);

	return NULL;

}

#endif /* CONFIG_IT913X_FE */

#define I2C_BASE_ADDR		0x10

#define DEV_0			0x0

#define DEV_1			0x10

#define PRO_LINK		0x0

#define PRO_DMOD		0x1

#define DEV_0_DMOD		(PRO_DMOD << 0x7)

#define DEV_1_DMOD		(DEV_0_DMOD | DEV_1)

#define CHIP2_I2C_ADDR		0x3a

#define AFE_MEM0		0xfb24

#define MP2_SW_RST		0xf99d

#define MP2IF2_SW_RST		0xf9a4

#define	PADODPU			0xd827

#define THIRDODPU		0xd828

#define AGC_O_D			0xd829

#define EP0_TX_EN		0xdd11

#define EP0_TX_NAK		0xdd13

#define EP4_TX_LEN_LSB		0xdd88

#define EP4_TX_LEN_MSB		0xdd89

#define EP4_MAX_PKT		0xdd0c

#define EP5_TX_LEN_LSB		0xdd8a

#define EP5_TX_LEN_MSB		0xdd8b

#define EP5_MAX_PKT		0xdd0d

#define IO_MUX_POWER_CLK	0xd800

#define CLK_O_EN		0xd81a

#define I2C_CLK			0xf103

#define I2C_CLK_100		0x7

#define I2C_CLK_400		0x1a

#define D_TPSD_LOCK		0xf5a9

#define MP2IF2_EN		0xf9a3

#define MP2IF_SERIAL		0xf985

#define TSIS_ENABLE		0xf9cd

#define MP2IF2_HALF_PSB		0xf9a5

#define MP2IF_STOP_EN		0xf9b5

#define MPEG_FULL_SPEED		0xf990

#define TOP_HOSTB_SER_MODE	0xd91c

#define PID_RST			0xf992

#define PID_EN			0xf993

#define PID_INX_EN		0xf994

#define PID_INX			0xf995

#define PID_LSB			0xf996

#define PID_MSB			0xf997

#define MP2IF_MPEG_PAR_MODE	0xf986

#define DCA_UPPER_CHIP		0xf731

#define DCA_LOWER_CHIP		0xf732

#define DCA_PLATCH		0xf730

#define DCA_FPGA_LATCH		0xf778

#define DCA_STAND_ALONE		0xf73c

#define DCA_ENABLE		0xf776

#define DVBT_INTEN		0xf41f

#define DVBT_ENABLE		0xf41a

#define HOSTB_DCA_LOWER		0xd91f

#define HOSTB_MPEG_PAR_MODE	0xd91b

#define HOSTB_MPEG_SER_MODE	0xd91c

#define HOSTB_MPEG_SER_DO7	0xd91d

#define HOSTB_DCA_UPPER		0xd91e

#define PADMISCDR2		0xd830

#define PADMISCDR4		0xd831

#define PADMISCDR8		0xd832

#define PADMISCDRSR		0xd833

#define LOCK3_OUT		0xd8fd

#define GPIOH1_O		0xd8af

#define GPIOH1_EN		0xd8b0

#define GPIOH1_ON		0xd8b1

#define GPIOH3_O		0xd8b3

#define GPIOH3_EN		0xd8b4

#define GPIOH3_ON		0xd8b5

#define GPIOH5_O		0xd8bb

#define GPIOH5_EN		0xd8bc

#define GPIOH5_ON		0xd8bd

#define AFE_MEM0		0xfb24

#define REG_TPSD_TX_MODE	0xf900

#define REG_TPSD_GI		0xf901

#define REG_TPSD_HIER		0xf902

#define REG_TPSD_CONST		0xf903

#define REG_BW			0xf904

#define REG_PRIV		0xf905

#define REG_TPSD_HP_CODE	0xf906

#define REG_TPSD_LP_CODE	0xf907

#define MP2IF_SYNC_LK		0xf999

#define ADC_FREQ		0xf1cd

#define TRIGGER_OFSM		0x0000

/* COEFF Registers start at 0x0001 to 0x0020 */

#define COEFF_1_2048		0x0001

#define XTAL_CLK		0x0025

#define BFS_FCW			0x0029

/* Error Regs */

#define RSD_ABORT_PKT_LSB	0x0032

#define RSD_ABORT_PKT_MSB	0x0033

#define RSD_BIT_ERR_0_7		0x0034

#define RSD_BIT_ERR_8_15	0x0035

#define RSD_BIT_ERR_23_16	0x0036

#define RSD_BIT_COUNT_LSB	0x0037

#define RSD_BIT_COUNT_MSB	0x0038

#define TPSD_LOCK		0x003c

#define TRAINING_MODE		0x0040

#define ADC_X_2			0x0045

#define TUNER_ID		0x0046

#define EMPTY_CHANNEL_STATUS	0x0047

#define SIGNAL_LEVEL		0x0048

#define SIGNAL_QUALITY		0x0049

#define EST_SIGNAL_LEVEL	0x004a

#define FREE_BAND		0x004b

#define SUSPEND_FLAG		0x004c

#define VAR_P_INBAND		0x00f7

/* Build in tuner types */

#define IT9137 0x38

#define IT9135_38 0x38

#define IT9135_51 0x51

#define IT9135_52 0x52

#define IT9135_60 0x60

#define IT9135_61 0x61

#define IT9135_62 0x62

enum {

	CMD_DEMOD_READ = 0,

	CMD_DEMOD_WRITE,

	CMD_TUNER_READ,

	CMD_TUNER_WRITE,

	CMD_REG_EEPROM_READ,

	CMD_REG_EEPROM_WRITE,

	CMD_DATA_READ,

	CMD_VAR_READ = 8,

	CMD_VAR_WRITE,

	CMD_PLATFORM_GET,

	CMD_PLATFORM_SET,

	CMD_IP_CACHE,

	CMD_IP_ADD,

	CMD_IP_REMOVE,

	CMD_PID_ADD,

	CMD_PID_REMOVE,

	CMD_SIPSI_GET,

	CMD_SIPSI_MPE_RESET,

	CMD_H_PID_ADD = 0x15,

	CMD_H_PID_REMOVE,

	CMD_ABORT,

	CMD_IR_GET,

	CMD_IR_SET,

	CMD_FW_DOWNLOAD = 0x21,

	CMD_QUERYINFO,

	CMD_BOOT,

	CMD_FW_DOWNLOAD_BEGIN,

	CMD_FW_DOWNLOAD_END,

	CMD_RUN_CODE,

	CMD_SCATTER_READ = 0x28,

	CMD_SCATTER_WRITE,

	CMD_GENERIC_READ,

	CMD_GENERIC_WRITE

};

enum {

	READ_LONG,

	WRITE_LONG,

	READ_SHORT,

	WRITE_SHORT,

	READ_DATA,

	WRITE_DATA,

	WRITE_CMD,

};

enum {

	IT9135_AUTO = 0,

	IT9137_FW,

	IT9135_V1_FW,

	IT9135_V2_FW,

};

#endif /* IT913X_FE_H */