Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1611f872 authored by Andrew Lunn's avatar Andrew Lunn Committed by Thomas Petazzoni
Browse files

ARM: Kirkwood: switch to DT clock providers



With true DT clock providers available switch Kirkwood clock setup in
DT- enabled boards. While AUXDATA can be removed completely from bus
probing, some devices still don't know about DT. Therefore, some clkdev
aliases are created until these devices also move to DT.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
parent 5b03df9a
Loading
Loading
Loading
Loading
+22 −0
Original line number Diff line number Diff line
@@ -19,6 +19,12 @@
		#address-cells = <1>;
		#size-cells = <1>;

		core_clk: core-clocks@10030 {
			compatible = "marvell,kirkwood-core-clock";
			reg = <0x10030 0x4>;
	        	#clock-cells = <1>;
		};

		gpio0: gpio@10100 {
			compatible = "marvell,orion-gpio";
			#gpio-cells = <2>;
@@ -42,6 +48,7 @@
			reg = <0x12000 0x100>;
			reg-shift = <2>;
			interrupts = <33>;
			clocks = <&gate_clk 7>;
			/* set clock-frequency in board dts */
			status = "disabled";
		};
@@ -51,6 +58,7 @@
			reg = <0x12100 0x100>;
			reg-shift = <2>;
			interrupts = <34>;
			clocks = <&gate_clk 7>;
			/* set clock-frequency in board dts */
			status = "disabled";
		};
@@ -68,12 +76,21 @@
			cell-index = <0>;
			interrupts = <23>;
			reg = <0x10600 0x28>;
			clocks = <&gate_clk 7>;
			status = "disabled";
		};

		gate_clk: clock-gating-control@2011c {
			compatible = "marvell,kirkwood-gating-clock";
			reg = <0x2011c 0x4>;
			clocks = <&core_clk 0>;
			#clock-cells = <1>;
		};

		wdt@20300 {
			compatible = "marvell,orion-wdt";
			reg = <0x20300 0x28>;
			clocks = <&gate_clk 7>;
			status = "okay";
		};

@@ -81,6 +98,8 @@
			compatible = "marvell,orion-sata";
			reg = <0x80000 0x5000>;
			interrupts = <21>;
			clocks = <&gate_clk 14>, <&gate_clk 15>;
			clock-names = "0", "1";
			status = "disabled";
		};

@@ -94,6 +113,7 @@
			reg = <0x3000000 0x400>;
			chip-delay = <25>;
			/* set partition map and/or chip-delay in board dts */
			clocks = <&gate_clk 7>;
			status = "disabled";
		};

@@ -104,6 +124,7 @@
			#size-cells = <0>;
			interrupts = <29>;
			clock-frequency = <100000>;
			clocks = <&gate_clk 7>;
			status = "disabled";
		};

@@ -113,6 +134,7 @@
			      <0xf5000000 0x800>;
			reg-names = "regs", "sram";
			interrupts = <22>;
			clocks = <&gate_clk 17>;
			status = "okay";
		};
	};
+2 −0
Original line number Diff line number Diff line
@@ -46,6 +46,8 @@ config MACH_GURUPLUG

config ARCH_KIRKWOOD_DT
	bool "Marvell Kirkwood Flattened Device Tree"
	select MVEBU_CLK_CORE
	select MVEBU_CLK_GATING
	select USE_OF
	help
	  Say 'Y' here if you want your kernel to support the
+58 −13
Original line number Diff line number Diff line
@@ -14,11 +14,15 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/clk/mvebu.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/irq.h>
#include <plat/common.h>
#include "common.h"

static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -26,16 +30,58 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
	{ }
};

struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
		       NULL),
	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
	{},
};
/*
 * There are still devices that doesn't know about DT yet.  Get clock
 * gates here and add a clock lookup alias, so that old platform
 * devices still work.
*/

static void __init kirkwood_legacy_clk_init(void)
{

	struct device_node *np = of_find_compatible_node(
		NULL, NULL, "marvell,kirkwood-gating-clock");

	struct of_phandle_args clkspec;

	clkspec.np = np;
	clkspec.args_count = 1;

	clkspec.args[0] = CGC_BIT_GE0;
	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_PEX0;
	orion_clkdev_add("0", "pcie",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_USB0;
	orion_clkdev_add(NULL, "orion-ehci.0",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_XOR0;
	orion_clkdev_add(NULL, "mv_xor_shared.0",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_XOR1;
	orion_clkdev_add(NULL, "mv_xor_shared.1",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_PEX1;
	orion_clkdev_add("1", "pcie",
			 of_clk_get_from_provider(&clkspec));

	clkspec.args[0] = CGC_BIT_GE1;
	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
			 of_clk_get_from_provider(&clkspec));

}

static void __init kirkwood_of_clk_init(void)
{
	mvebu_clocks_init();
	kirkwood_legacy_clk_init();
}

static void __init kirkwood_dt_init(void)
{
@@ -54,7 +100,7 @@ static void __init kirkwood_dt_init(void)
	kirkwood_l2_init();

	/* Setup root of clk tree */
	kirkwood_clk_init();
	kirkwood_of_clk_init();

	/* internal devices that every board has */
	kirkwood_xor0_init();
@@ -94,8 +140,7 @@ static void __init kirkwood_dt_init(void)
	if (of_machine_is_compatible("keymile,km_kirkwood"))
		km_kirkwood_init();

	of_platform_populate(NULL, kirkwood_dt_match_table,
			     kirkwood_auxdata_lookup, NULL);
	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}

static const char *kirkwood_dt_board_compat[] = {
+1 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@
#include <linux/mv643xx_eth.h>

struct dsa_platform_data;
struct mv_sata_platform_data;

void __init orion_uart0_init(void __iomem *membase,
			     resource_size_t mapbase,