bsg: use u32 etc instead of uint32_t

#define BSG_H

struct sg_io_v4 {

	int32_t guard;		/* [i] 'Q' to differentiate from v3 */

	uint32_t protocol;	/* [i] 0 -> SCSI , .... */

	uint32_t subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task

	s32 guard;		/* [i] 'Q' to differentiate from v3 */

	u32 protocol;		/* [i] 0 -> SCSI , .... */

	u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task

				   management function, .... */

	uint32_t request_len;	/* [i] in bytes */

	uint64_t request;	/* [i], [*i] {SCSI: cdb} */

	uint32_t request_attr;	/* [i] {SCSI: task attribute} */

	uint32_t request_tag;	/* [i] {SCSI: task tag (only if flagged)} */

	uint32_t request_priority;	/* [i] {SCSI: task priority} */

	uint32_t max_response_len;	/* [i] in bytes */

	uint64_t response;	/* [i], [*o] {SCSI: (auto)sense data} */

	u32 request_len;	/* [i] in bytes */

	u64 request;		/* [i], [*i] {SCSI: cdb} */

	u32 request_attr;	/* [i] {SCSI: task attribute} */

	u32 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */

	u32 request_priority;	/* [i] {SCSI: task priority} */

	u32 max_response_len;	/* [i] in bytes */

	u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */

	/* "din_" for data in (from device); "dout_" for data out (to device) */

	uint32_t dout_xfer_len;	/* [i] bytes to be transferred to device */

	uint32_t din_xfer_len;	/* [i] bytes to be transferred from device */

	uint64_t dout_xferp;	/* [i], [*i] */

	uint64_t din_xferp;	/* [i], [*o] */

	u32 dout_xfer_len;	/* [i] bytes to be transferred to device */

	u32 din_xfer_len;	/* [i] bytes to be transferred from device */

	u64 dout_xferp;		/* [i], [*i] */

	u64 din_xferp;		/* [i], [*o] */

	uint32_t timeout;	/* [i] units: millisecond */

	uint32_t flags;		/* [i] bit mask */

	uint64_t usr_ptr;	/* [i->o] unused internally */

	uint32_t spare_in;	/* [i] */

	u32 timeout;		/* [i] units: millisecond */

	u32 flags;		/* [i] bit mask */

	u64 usr_ptr;		/* [i->o] unused internally */

	u32 spare_in;		/* [i] */

	uint32_t driver_status;	/* [o] 0 -> ok */

	uint32_t transport_status;	/* [o] 0 -> ok */

	uint32_t device_status;	/* [o] {SCSI: command completion status} */

	uint32_t retry_delay;	/* [o] {SCSI: status auxiliary information} */

	uint32_t info;		/* [o] additional information */

	uint32_t duration;	/* [o] time to complete, in milliseconds */

	uint32_t response_len;	/* [o] bytes of response actually written */

	int32_t din_resid;	/* [o] actual_din_xfer_len - din_xfer_len */

	uint32_t generated_tag;	/* [o] {SCSI: task tag that transport chose} */

	uint32_t spare_out;	/* [o] */

	u32 driver_status;	/* [o] 0 -> ok */

	u32 transport_status;	/* [o] 0 -> ok */

	u32 device_status;	/* [o] {SCSI: command completion status} */

	u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */

	u32 info;		/* [o] additional information */

	u32 duration;		/* [o] time to complete, in milliseconds */

	u32 response_len;	/* [o] bytes of response actually written */

	s32 din_resid;		/* [o] actual_din_xfer_len - din_xfer_len */

	u32 generated_tag;	/* [o] {SCSI: task tag that transport chose} */

	u32 spare_out;		/* [o] */

	uint32_t padding;

	u32 padding;

};

#ifdef __KERNEL__