Merge linux-2.6 into linux-acpi-2.6 test

	pcmciautils package available at

	http://kernel.org/pub/linux/utils/kernel/pcmcia/

Who:	Dominik Brodowski <linux@brodo.de>

---------------------------

What:	ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)

When:	December 2005

Why:	This interface has been obsoleted by the new layer3-independent

	"nfnetlink_queue".  The Kernel interface is compatible, so the old

	ip[6]tables "QUEUE" targets still work and will transparently handle

	all packets into nfnetlink queue number 0.  Userspace users will have

	to link against API-compatible library on top of libnfnetlink_queue 

	instead of the current 'libipq'.

Who:	Harald Welte <laforge@netfilter.org>

===========================

Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux

README.ipw2100

March 14, 2005

===========================

Index

---------------------------

0. Introduction

1. Release 1.1.0 Current Features

2. Command Line Parameters

3. Sysfs Helper Files

4. Radio Kill Switch

5. Dynamic Firmware

6. Power Management

7. Support

8. License

===========================

0. Introduction

------------ -----   -----       ----       ---       --         -     

This document provides a brief overview of the features supported by the 

IPW2100 driver project.  The main project website, where the latest 

development version of the driver can be found, is:

	http://ipw2100.sourceforge.net

There you can find the not only the latest releases, but also information about

potential fixes and patches, as well as links to the development mailing list

for the driver project.

===========================

1. Release 1.1.0 Current Supported Features

---------------------------     

- Managed (BSS) and Ad-Hoc (IBSS)

- WEP (shared key and open)

- Wireless Tools support 

- 802.1x (tested with XSupplicant 1.0.1)

Enabled (but not supported) features:

- Monitor/RFMon mode

- WPA/WPA2

The distinction between officially supported and enabled is a reflection

on the amount of validation and interoperability testing that has been

performed on a given feature.

===========================

2. Command Line Parameters

---------------------------     

If the driver is built as a module, the following optional parameters are used

by entering them on the command line with the modprobe command using this

syntax:

	modprobe ipw2100 [<option>=<VAL1><,VAL2>...]

For example, to disable the radio on driver loading, enter:

	modprobe ipw2100 disable=1

The ipw2100 driver supports the following module parameters:

Name		Value		Example:

debug		0x0-0xffffffff	debug=1024

mode		0,1,2		mode=1   /* AdHoc */

channel		int		channel=3 /* Only valid in AdHoc or Monitor */

associate	boolean		associate=0 /* Do NOT auto associate */

disable		boolean		disable=1 /* Do not power the HW */

===========================

3. Sysfs Helper Files

---------------------------     

There are several ways to control the behavior of the driver.  Many of the 

general capabilities are exposed through the Wireless Tools (iwconfig).  There

are a few capabilities that are exposed through entries in the Linux Sysfs.

----- Driver Level ------

For the driver level files, look in /sys/bus/pci/drivers/ipw2100/

  debug_level  

	This controls the same global as the 'debug' module parameter.  For 

        information on the various debugging levels available, run the 'dvals'

	script found in the driver source directory.

	NOTE:  'debug_level' is only enabled if CONFIG_IPW2100_DEBUG is turn

	       on.

----- Device Level ------

For the device level files look in

	/sys/bus/pci/drivers/ipw2100/{PCI-ID}/

For example:

	/sys/bus/pci/drivers/ipw2100/0000:02:01.0

For the device level files, see /sys/bus/pci/drivers/ipw2100:

  rf_kill

	read - 

	0 = RF kill not enabled (radio on)

	1 = SW based RF kill active (radio off)

	2 = HW based RF kill active (radio off)

	3 = Both HW and SW RF kill active (radio off)

	write -

	0 = If SW based RF kill active, turn the radio back on

	1 = If radio is on, activate SW based RF kill

	NOTE: If you enable the SW based RF kill and then toggle the HW

  	based RF kill from ON -> OFF -> ON, the radio will NOT come back on

===========================

4. Radio Kill Switch

---------------------------

Most laptops provide the ability for the user to physically disable the radio.

Some vendors have implemented this as a physical switch that requires no

software to turn the radio off and on.  On other laptops, however, the switch

is controlled through a button being pressed and a software driver then making

calls to turn the radio off and on.  This is referred to as a "software based

RF kill switch"

See the Sysfs helper file 'rf_kill' for determining the state of the RF switch

on your system.

===========================

5. Dynamic Firmware

---------------------------     

As the firmware is licensed under a restricted use license, it can not be 

included within the kernel sources.  To enable the IPW2100 you will need a 

firmware image to load into the wireless NIC's processors.

You can obtain these images from <http://ipw2100.sf.net/firmware.php>.

See INSTALL for instructions on installing the firmware.

===========================

6. Power Management

---------------------------     

The IPW2100 supports the configuration of the Power Save Protocol 

through a private wireless extension interface.  The IPW2100 supports 

the following different modes:

	off	No power management.  Radio is always on.

	on	Automatic power management

	1-5	Different levels of power management.  The higher the 

		number the greater the power savings, but with an impact to 

		packet latencies. 

Power management works by powering down the radio after a certain 

interval of time has passed where no packets are passed through the 

radio.  Once powered down, the radio remains in that state for a given 

period of time.  For higher power savings, the interval between last 

packet processed to sleep is shorter and the sleep period is longer.

When the radio is asleep, the access point sending data to the station 

must buffer packets at the AP until the station wakes up and requests 

any buffered packets.  If you have an AP that does not correctly support 

the PSP protocol you may experience packet loss or very poor performance 

while power management is enabled.  If this is the case, you will need 

to try and find a firmware update for your AP, or disable power 

management (via `iwconfig eth1 power off`)

To configure the power level on the IPW2100 you use a combination of 

iwconfig and iwpriv.  iwconfig is used to turn power management on, off, 

and set it to auto.

	iwconfig eth1 power off    Disables radio power down

	iwconfig eth1 power on     Enables radio power management to 

				   last set level (defaults to AUTO)

	iwpriv eth1 set_power 0    Sets power level to AUTO and enables 

				   power management if not previously 

				   enabled.

	iwpriv eth1 set_power 1-5  Set the power level as specified, 

				   enabling power management if not 

				   previously enabled.

You can view the current power level setting via:

	iwpriv eth1 get_power

It will return the current period or timeout that is configured as a string

in the form of xxxx/yyyy (z) where xxxx is the timeout interval (amount of

time after packet processing), yyyy is the period to sleep (amount of time to 

wait before powering the radio and querying the access point for buffered

packets), and z is the 'power level'.  If power management is turned off the

xxxx/yyyy will be replaced with 'off' -- the level reported will be the active

level if `iwconfig eth1 power on` is invoked.

===========================

7. Support

---------------------------     

For general development information and support,

go to:

    http://ipw2100.sf.net/

The ipw2100 1.1.0 driver and firmware can be downloaded from:  

    http://support.intel.com

For installation support on the ipw2100 1.1.0 driver on Linux kernels 

2.6.8 or greater, email support is available from:  

    http://supportmail.intel.com

===========================

8. License

---------------------------     

  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.

  This program is free software; you can redistribute it and/or modify it 

  under the terms of the GNU General Public License (version 2) as 

  published by the Free Software Foundation.

  This program is distributed in the hope that it will be useful, but WITHOUT 

  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 

  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 

  more details.

  You should have received a copy of the GNU General Public License along with

  this program; if not, write to the Free Software Foundation, Inc., 59 

  Temple Place - Suite 330, Boston, MA  02111-1307, USA.

  The full GNU General Public License is included in this distribution in the

  file called LICENSE.

  License Contact Information:

  James P. Ketrenos <ipw2100-admin@linux.intel.com>

  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:

Intel(R) PRO/Wireless 2200BG Network Connection 

Intel(R) PRO/Wireless 2915ABG Network Connection 

Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) 

PRO/Wireless 2200BG Driver for Linux is a unified driver that works on 

both hardware adapters listed above. In this document the Intel(R) 

PRO/Wireless 2915ABG Driver for Linux will be used to reference the 

unified driver.

Copyright (C) 2004-2005, Intel Corporation

README.ipw2200

Version: 1.0.0

Date   : January 31, 2005

Index

-----------------------------------------------

1.   Introduction

1.1. Overview of features

1.2. Module parameters

1.3. Wireless Extension Private Methods

1.4. Sysfs Helper Files

2.   About the Version Numbers

3.   Support

4.   License

1.   Introduction

-----------------------------------------------

The following sections attempt to provide a brief introduction to using 

the Intel(R) PRO/Wireless 2915ABG Driver for Linux.

This document is not meant to be a comprehensive manual on 

understanding or using wireless technologies, but should be sufficient 

to get you moving without wires on Linux.

For information on building and installing the driver, see the INSTALL

file.

1.1. Overview of Features

-----------------------------------------------

The current release (1.0.0) supports the following features:

+ BSS mode (Infrastructure, Managed)

+ IBSS mode (Ad-Hoc)

+ WEP (OPEN and SHARED KEY mode)

+ 802.1x EAP via wpa_supplicant and xsupplicant

+ Wireless Extension support 

+ Full B and G rate support (2200 and 2915)

+ Full A rate support (2915 only)

+ Transmit power control

+ S state support (ACPI suspend/resume)

+ long/short preamble support

1.2. Command Line Parameters

-----------------------------------------------

Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless 

2915ABG Driver for Linux allows certain configuration options to be 

provided as module parameters.  The most common way to specify a module 

parameter is via the command line.  

The general form is:

% modprobe ipw2200 parameter=value

Where the supported parameter are:

  associate

	Set to 0 to disable the auto scan-and-associate functionality of the

	driver.  If disabled, the driver will not attempt to scan 

	for and associate to a network until it has been configured with 

	one or more properties for the target network, for example configuring 

	the network SSID.  Default is 1 (auto-associate)

	Example: % modprobe ipw2200 associate=0

  auto_create

	Set to 0 to disable the auto creation of an Ad-Hoc network 

	matching the channel and network name parameters provided.  

	Default is 1.

  channel

	channel number for association.  The normal method for setting

        the channel would be to use the standard wireless tools

        (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes

	to set this while debugging.  Channel 0 means 'ANY'

  debug

	If using a debug build, this is used to control the amount of debug

	info is logged.  See the 'dval' and 'load' script for more info on

	how to use this (the dval and load scripts are provided as part 

	of the ipw2200 development snapshot releases available from the 

	SourceForge project at http://ipw2200.sf.net)

  mode

	Can be used to set the default mode of the adapter.  

	0 = Managed, 1 = Ad-Hoc

1.3. Wireless Extension Private Methods

-----------------------------------------------

As an interface designed to handle generic hardware, there are certain 

capabilities not exposed through the normal Wireless Tool interface.  As 

such, a provision is provided for a driver to declare custom, or 

private, methods.  The Intel(R) PRO/Wireless 2915ABG Driver for Linux 

defines several of these to configure various settings.

The general form of using the private wireless methods is:

	% iwpriv $IFNAME method parameters

Where $IFNAME is the interface name the device is registered with 

(typically eth1, customized via one of the various network interface

name managers, such as ifrename)

The supported private methods are:

  get_mode

	Can be used to report out which IEEE mode the driver is 

	configured to support.  Example:

	% iwpriv eth1 get_mode

	eth1	get_mode:802.11bg (6)

  set_mode

	Can be used to configure which IEEE mode the driver will 

	support.  

	Usage:

	% iwpriv eth1 set_mode {mode}

	Where {mode} is a number in the range 1-7:

	1	802.11a (2915 only)

	2	802.11b

	3	802.11ab (2915 only)

	4	802.11g 

	5	802.11ag (2915 only)

	6	802.11bg

	7	802.11abg (2915 only)

  get_preamble

	Can be used to report configuration of preamble length.

  set_preamble

	Can be used to set the configuration of preamble length:

	Usage:

	% iwpriv eth1 set_preamble {mode}

	Where {mode} is one of:

	1	Long preamble only

	0	Auto (long or short based on connection)

1.4. Sysfs Helper Files:

-----------------------------------------------

The Linux kernel provides a pseudo file system that can be used to 

access various components of the operating system.  The Intel(R) 

PRO/Wireless 2915ABG Driver for Linux exposes several configuration 

parameters through this mechanism.

An entry in the sysfs can support reading and/or writing.  You can 

typically query the contents of a sysfs entry through the use of cat, 

and can set the contents via echo.  For example:

% cat /sys/bus/pci/drivers/ipw2200/debug_level

Will report the current debug level of the driver's logging subsystem 

(only available if CONFIG_IPW_DEBUG was configured when the driver was 

built).

You can set the debug level via:

% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level

Where $VALUE would be a number in the case of this sysfs entry.  The 

input to sysfs files does not have to be a number.  For example, the 

firmware loader used by hotplug utilizes sysfs entries for transferring 

the firmware image from user space into the driver.

The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries 

at two levels -- driver level, which apply to all instances of the 

driver (in the event that there are more than one device installed) and 

device level, which applies only to the single specific instance.

1.4.1 Driver Level Sysfs Helper Files

-----------------------------------------------

For the driver level files, look in /sys/bus/pci/drivers/ipw2200/

  debug_level  

	This controls the same global as the 'debug' module parameter

1.4.2 Device Level Sysfs Helper Files

-----------------------------------------------

For the device level files, look in

	/sys/bus/pci/drivers/ipw2200/{PCI-ID}/

For example:

	/sys/bus/pci/drivers/ipw2200/0000:02:01.0

For the device level files, see /sys/bus/pci/[drivers/ipw2200:

  rf_kill

	read - 

	0 = RF kill not enabled (radio on)

	1 = SW based RF kill active (radio off)

	2 = HW based RF kill active (radio off)

	3 = Both HW and SW RF kill active (radio off)

	write -

	0 = If SW based RF kill active, turn the radio back on

	1 = If radio is on, activate SW based RF kill

	NOTE: If you enable the SW based RF kill and then toggle the HW

  	based RF kill from ON -> OFF -> ON, the radio will NOT come back on

  ucode 

	read-only access to the ucode version number

2.   About the Version Numbers

-----------------------------------------------

Due to the nature of open source development projects, there are 

frequently changes being incorporated that have not gone through 

a complete validation process.  These changes are incorporated into 

development snapshot releases.

Releases are numbered with a three level scheme: 

	major.minor.development

Any version where the 'development' portion is 0 (for example

1.0.0, 1.1.0, etc.) indicates a stable version that will be made 

available for kernel inclusion.

Any version where the 'development' portion is not a 0 (for

example 1.0.1, 1.1.5, etc.) indicates a development version that is

being made available for testing and cutting edge users.  The stability 

and functionality of the development releases are not know.  We make

efforts to try and keep all snapshots reasonably stable, but due to the

frequency of their release, and the desire to get those releases 

available as quickly as possible, unknown anomalies should be expected.

The major version number will be incremented when significant changes

are made to the driver.  Currently, there are no major changes planned.

3.  Support

-----------------------------------------------

For installation support of the 1.0.0 version, you can contact 

http://supportmail.intel.com, or you can use the open source project 

support.

For general information and support, go to:

    http://ipw2200.sf.net/

4.  License

-----------------------------------------------

  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.

  This program is free software; you can redistribute it and/or modify it 

  under the terms of the GNU General Public License version 2 as 

  published by the Free Software Foundation.

  This program is distributed in the hope that it will be useful, but WITHOUT 

  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 

  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 

  more details.

  You should have received a copy of the GNU General Public License along with

  this program; if not, write to the Free Software Foundation, Inc., 59 

  Temple Place - Suite 330, Boston, MA  02111-1307, USA.

  The full GNU General Public License is included in this distribution in the

  file called LICENSE.

  Contact Information:

  James P. Ketrenos <ipw2100-admin@linux.intel.com>

  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

	Interrupts: locally disabled.

	This call must not sleep

  stop_tx(port,tty_stop)

  stop_tx(port)

	Stop transmitting characters.  This might be due to the CTS

	line becoming inactive or the tty layer indicating we want

	to stop transmission.

	tty_stop: 1 if this call is due to the TTY layer issuing a

	          TTY stop to the driver (equiv to rs_stop).

	to stop transmission due to an XOFF character.

	Locking: port->lock taken.

	Interrupts: locally disabled.

	This call must not sleep

  start_tx(port,tty_start)

	start transmitting characters.  (incidentally, nonempty will

	always be nonzero, and shouldn't be used - it will be dropped).

	tty_start: 1 if this call was due to the TTY layer issuing

	           a TTY start to the driver (equiv to rs_start)

  start_tx(port)

	start transmitting characters.

	Locking: port->lock taken.

	Interrupts: locally disabled.