Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0cd8f9cc authored by Mugunthan V N's avatar Mugunthan V N Committed by David S. Miller
Browse files

drivers: net: cpsw: enable promiscuous mode support 



Enable promiscuous mode support for CPSW.

Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6ef7b8a2

drivers/net/ethernet/ti/cpsw.c

+80 −25
Original line number Diff line number Diff line
@@ -541,14 +541,93 @@ static inline int cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) 
		return slave_num;

}



static void cpsw_set_promiscious(struct net_device *ndev, bool enable)

{

	struct cpsw_priv *priv = netdev_priv(ndev);

	struct cpsw_ale *ale = priv->ale;

	int i;



	if (priv->data.dual_emac) {

		bool flag = false;



		/* Enabling promiscuous mode for one interface will be

		 * common for both the interface as the interface shares

		 * the same hardware resource.

		 */

		for (i = 0; i <= priv->data.slaves; i++)

			if (priv->slaves[i].ndev->flags & IFF_PROMISC)

				flag = true;



		if (!enable && flag) {

			enable = true;

			dev_err(&ndev->dev, "promiscuity not disabled as the other interface is still in promiscuity mode\n");

		}



		if (enable) {

			/* Enable Bypass */

			cpsw_ale_control_set(ale, 0, ALE_BYPASS, 1);



			dev_dbg(&ndev->dev, "promiscuity enabled\n");

		} else {

			/* Disable Bypass */

			cpsw_ale_control_set(ale, 0, ALE_BYPASS, 0);

			dev_dbg(&ndev->dev, "promiscuity disabled\n");

		}

	} else {

		if (enable) {

			unsigned long timeout = jiffies + HZ;



			/* Disable Learn for all ports */

			for (i = 0; i <= priv->data.slaves; i++) {

				cpsw_ale_control_set(ale, i,

						     ALE_PORT_NOLEARN, 1);

				cpsw_ale_control_set(ale, i,

						     ALE_PORT_NO_SA_UPDATE, 1);

			}



			/* Clear All Untouched entries */

			cpsw_ale_control_set(ale, 0, ALE_AGEOUT, 1);

			do {

				cpu_relax();

				if (cpsw_ale_control_get(ale, 0, ALE_AGEOUT))

					break;

			} while (time_after(timeout, jiffies));

			cpsw_ale_control_set(ale, 0, ALE_AGEOUT, 1);



			/* Clear all mcast from ALE */

			cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS <<

						 priv->host_port);



			/* Flood All Unicast Packets to Host port */

			cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);

			dev_dbg(&ndev->dev, "promiscuity enabled\n");

		} else {

			/* Flood All Unicast Packets to Host port */

			cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);



			/* Enable Learn for all ports */

			for (i = 0; i <= priv->data.slaves; i++) {

				cpsw_ale_control_set(ale, i,

						     ALE_PORT_NOLEARN, 0);

				cpsw_ale_control_set(ale, i,

						     ALE_PORT_NO_SA_UPDATE, 0);

			}

			dev_dbg(&ndev->dev, "promiscuity disabled\n");

		}

	}

}



static void cpsw_ndo_set_rx_mode(struct net_device *ndev)

{

	struct cpsw_priv *priv = netdev_priv(ndev);



	if (ndev->flags & IFF_PROMISC) {

		/* Enable promiscuous mode */

		dev_err(priv->dev, "Ignoring Promiscuous mode\n");

		cpsw_set_promiscious(ndev, true);

		return;

	} else {

		/* Disable promiscuous mode */

		cpsw_set_promiscious(ndev, false);

	}



	/* Clear all mcast from ALE */
@@ -1257,29 +1336,6 @@ fail: 
	return NETDEV_TX_BUSY;

}



static void cpsw_ndo_change_rx_flags(struct net_device *ndev, int flags)

{

	/*

	 * The switch cannot operate in promiscuous mode without substantial

	 * headache.  For promiscuous mode to work, we would need to put the

	 * ALE in bypass mode and route all traffic to the host port.

	 * Subsequently, the host will need to operate as a "bridge", learn,

	 * and flood as needed.  For now, we simply complain here and

	 * do nothing about it :-)

	 */

	if ((flags & IFF_PROMISC) && (ndev->flags & IFF_PROMISC))

		dev_err(&ndev->dev, "promiscuity ignored!\n");



	/*

	 * The switch cannot filter multicast traffic unless it is configured

	 * in "VLAN Aware" mode.  Unfortunately, VLAN awareness requires a

	 * whole bunch of additional logic that this driver does not implement

	 * at present.

	 */

	if ((flags & IFF_ALLMULTI) && !(ndev->flags & IFF_ALLMULTI))

		dev_err(&ndev->dev, "multicast traffic cannot be filtered!\n");

}



#ifdef CONFIG_TI_CPTS



static void cpsw_hwtstamp_v1(struct cpsw_priv *priv)
@@ -1575,7 +1631,6 @@ static const struct net_device_ops cpsw_netdev_ops = { 
	.ndo_open		= cpsw_ndo_open,

	.ndo_stop		= cpsw_ndo_stop,

	.ndo_start_xmit		= cpsw_ndo_start_xmit,

	.ndo_change_rx_flags	= cpsw_ndo_change_rx_flags,

	.ndo_set_mac_address	= cpsw_ndo_set_mac_address,

	.ndo_do_ioctl		= cpsw_ndo_ioctl,

	.ndo_validate_addr	= eth_validate_addr,

drivers/net/ethernet/ti/cpsw_ale.c

+16 −0
Original line number Diff line number Diff line
@@ -477,6 +477,14 @@ static const struct ale_control_info ale_controls[ALE_NUM_CONTROLS] = { 
		.port_shift	= 0,

		.bits		= 1,

	},

	[ALE_P0_UNI_FLOOD]	= {

		.name		= "port0_unicast_flood",

		.offset		= ALE_CONTROL,

		.port_offset	= 0,

		.shift		= 8,

		.port_shift	= 0,

		.bits		= 1,

	},

	[ALE_VLAN_NOLEARN]	= {

		.name		= "vlan_nolearn",

		.offset		= ALE_CONTROL,
@@ -573,6 +581,14 @@ static const struct ale_control_info ale_controls[ALE_NUM_CONTROLS] = { 
		.port_shift	= 0,

		.bits		= 1,

	},

	[ALE_PORT_NO_SA_UPDATE]	= {

		.name		= "no_source_update",

		.offset		= ALE_PORTCTL,

		.port_offset	= 4,

		.shift		= 5,

		.port_shift	= 0,

		.bits		= 1,

	},

	[ALE_PORT_MCAST_LIMIT]	= {

		.name		= "mcast_limit",

		.offset		= ALE_PORTCTL,

drivers/net/ethernet/ti/cpsw_ale.h

+2 −0
Original line number Diff line number Diff line
@@ -34,6 +34,7 @@ enum cpsw_ale_control { 
	ALE_ENABLE,

	ALE_CLEAR,

	ALE_AGEOUT,

	ALE_P0_UNI_FLOOD,

	ALE_VLAN_NOLEARN,

	ALE_NO_PORT_VLAN,

	ALE_OUI_DENY,
@@ -47,6 +48,7 @@ enum cpsw_ale_control { 
	ALE_PORT_DROP_UNTAGGED,

	ALE_PORT_DROP_UNKNOWN_VLAN,

	ALE_PORT_NOLEARN,

	ALE_PORT_NO_SA_UPDATE,

	ALE_PORT_UNKNOWN_VLAN_MEMBER,

	ALE_PORT_UNKNOWN_MCAST_FLOOD,

	ALE_PORT_UNKNOWN_REG_MCAST_FLOOD,