Merge "ARM: dts: msm: Add camera dtsi file for MSM8940 QRD SKU7 board"

/*

 * Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};

	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		compatible = "qcom,eeprom";

		qcom,cci-master = <0>;

		reg = <0x0>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0";

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <19200000 0>;

	};

	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		reg = <0x02>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

								"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

					&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

					&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <19200000 0>;

	};

	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator0>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		cam_vaf-supply = <&pm8937_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep

				&cam_sensor_rear_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 36 0>,

			<&tlmm 35 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		clocks = <&clock_gcc clk_mclk0_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x01>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,eeprom-src = <&eeprom2>;

		qcom,mount-angle = <270>;

		cam_vdig-supply = <&pm8937_l23>;

		cam_vana-supply = <&pm8937_l22>;

		cam_vio-supply = <&pm8937_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		clocks = <&clock_gcc clk_mclk2_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};

#include "msm8940.dtsi"

#include "msm8937-pmi8950-qrd-sku1.dtsi"

#include "msm8940-camera-sensor-qrd.dtsi"

#include "msm8940-pinctrl.dtsi"

/ {