Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f3f541f9 authored by Jens Axboe's avatar Jens Axboe
Browse files

Remove legacy CDROM drivers 



They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
parent e654bc43

drivers/Kconfig

+0 −2
Original line number Diff line number Diff line
@@ -24,8 +24,6 @@ source "drivers/scsi/Kconfig" 


source "drivers/ata/Kconfig"



source "drivers/cdrom/Kconfig"



source "drivers/md/Kconfig"



source "drivers/message/fusion/Kconfig"

drivers/cdrom/Kconfig

deleted100644 → 0
+0 −213
Original line number Diff line number Diff line 
#

# CDROM driver configuration

#



menu "Old CD-ROM drivers (not SCSI, not IDE)"

	depends on ISA && BLOCK



config CD_NO_IDESCSI

	bool "Support non-SCSI/IDE/ATAPI CDROM drives"

	---help---

	  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y

	  here, otherwise N. Read the CD-ROM-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.



	  Note that the answer to this question doesn't directly affect the

	  kernel: saying N will just cause the configurator to skip all

	  the questions about these CD-ROM drives. If you are unsure what you

	  have, say Y and find out whether you have one of the following

	  drives.



	  For each of these drivers, a <file:Documentation/cdrom/{driver_name}>

	  exists. Especially in cases where you do not know exactly which kind

	  of drive you have you should read there. Most of these drivers use a

	  file drivers/cdrom/{driver_name}.h where you can define your

	  interface parameters and switch some internal goodies.



	  To compile these CD-ROM drivers as a module, choose M instead of Y.



	  If you want to use any of these CD-ROM drivers, you also have to

	  answer Y or M to "ISO 9660 CD-ROM file system support" below (this

	  answer will get "defaulted" for you if you enable any of the Linux

	  CD-ROM drivers).



config AZTCD

	tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"

	depends on CD_NO_IDESCSI

	---help---

	  This is your driver if you have an Aztech CDA268-01A, Orchid

	  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or

	  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM

	  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such

	  as Aztech CDA269-031SE. Please read the file

	  <file:Documentation/cdrom/aztcd>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called aztcd.



config GSCD

	tristate "Goldstar R420 CDROM support"

	depends on CD_NO_IDESCSI

	---help---

	  If this is your CD-ROM drive, say Y here.  As described in the file

	  <file:Documentation/cdrom/gscd>, you might have to change a setting

	  in the file <file:drivers/cdrom/gscd.h> before compiling the

	  kernel.  Please read the file <file:Documentation/cdrom/gscd>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called gscd.



config SBPCD

	tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"

	depends on CD_NO_IDESCSI && BROKEN_ON_SMP

	---help---

	  This driver supports most of the drives which use the Panasonic or

	  Sound Blaster interface.  Please read the file

	  <file:Documentation/cdrom/sbpcd>.



	  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives

	  (sometimes labeled "Creative"), the Creative Labs CD200, the

	  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x

	  model), the TEAC CD-55A fall under this category.  Some other

	  "electrically compatible" drives (Vertos, Genoa, some Funai models)

	  are currently not supported; for the Sanyo H94A drive currently a

	  separate driver (asked later) is responsible.  Most drives have a

	  uniquely shaped faceplate, with a caddyless motorized drawer, but

	  without external brand markings.  The older CR-52x drives have a

	  caddy and manual loading/eject, but still no external markings.  The

	  driver is able to do an extended auto-probing for interface

	  addresses and drive types; this can help to find facts in cases you

	  are not sure, but can consume some time during the boot process if

	  none of the supported drives gets found.  Once your drive got found,

	  you should enter the reported parameters into

	  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.



	  This driver can support up to four CD-ROM controller cards, and each

	  card can support up to four CD-ROM drives; if you say Y here, you

	  will be asked how many controller cards you have.  If compiled as a

	  module, only one controller card (but with up to four drives) is

	  usable.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called sbpcd.



config MCDX

	tristate "Mitsumi CDROM support"

	depends on CD_NO_IDESCSI

	---help---

	  Use this driver if you want to be able to use your Mitsumi LU-005,

	  FX-001 or FX-001D CD-ROM drive.



	  Please read the file <file:Documentation/cdrom/mcdx>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called mcdx.



config OPTCD

	tristate "Optics Storage DOLPHIN 8000AT CDROM support"

	depends on CD_NO_IDESCSI

	---help---

	  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony

	  compatible interface. It also works with the Lasermate CR328A. If

	  you have one of those, say Y. This driver does not work for the

	  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that

	  one. Please read the file <file:Documentation/cdrom/optcd>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called optcd.



config CM206

	tristate "Philips/LMS CM206 CDROM support"

	depends on CD_NO_IDESCSI && BROKEN_ON_SMP

	---help---

	  If you have a Philips/LMS CD-ROM drive cm206 in combination with a

	  cm260 host adapter card, say Y here. Please also read the file

	  <file:Documentation/cdrom/cm206>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called cm206.



config SJCD

	tristate "Sanyo CDR-H94A CDROM support"

	depends on CD_NO_IDESCSI

	help

	  If this is your CD-ROM drive, say Y here and read the file

	  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to

	  "ISO 9660 CD-ROM file system support" below, because that's the

	  file system used on CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called sjcd.



config ISP16_CDI

	tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"

	depends on CD_NO_IDESCSI

	---help---

	  These are sound cards with built-in cdrom interfaces using the OPTi

	  82C928 or 82C929 chips. Say Y here to have them detected and

	  possibly configured at boot time. In addition, You'll have to say Y

	  to a driver for the particular cdrom drive you have attached to the

	  card. Read <file:Documentation/cdrom/isp16> for details.



	  To compile this driver as a module, choose M here: the

	  module will be called isp16.



config CDU31A

	tristate "Sony CDU31A/CDU33A CDROM support"

	depends on CD_NO_IDESCSI && BROKEN_ON_SMP

	---help---

	  These CD-ROM drives have a spring-pop-out caddyless drawer, and a

	  rectangular green LED centered beneath it.  NOTE: these CD-ROM

	  drives will not be auto detected by the kernel at boot time; you

	  have to provide the interface address as an option to the kernel at

	  boot time as described in <file:Documentation/cdrom/cdu31a> or fill

	  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man

	  bootparam" or see the documentation of your boot loader (lilo or

	  loadlin) about how to pass options to the kernel.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called cdu31a.



config CDU535

	tristate "Sony CDU535 CDROM support"

	depends on CD_NO_IDESCSI

	---help---

	  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM

	  drives. Please read the file <file:Documentation/cdrom/sonycd535>.



	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM

	  file system support" below, because that's the file system used on

	  CD-ROMs.



	  To compile this driver as a module, choose M here: the

	  module will be called sonycd535.



endmenu

drivers/cdrom/Makefile

+0 −10
Original line number Diff line number Diff line
@@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR) += cdrom.o 
obj-$(CONFIG_PARIDE_PCD)	+=		cdrom.o

obj-$(CONFIG_CDROM_PKTCDVD)	+=		cdrom.o



obj-$(CONFIG_AZTCD)		+= aztcd.o

obj-$(CONFIG_CDU31A)		+= cdu31a.o     cdrom.o

obj-$(CONFIG_CM206)		+= cm206.o      cdrom.o

obj-$(CONFIG_GSCD)		+= gscd.o

obj-$(CONFIG_ISP16_CDI)		+= isp16.o

obj-$(CONFIG_MCDX)		+= mcdx.o       cdrom.o

obj-$(CONFIG_OPTCD)		+= optcd.o

obj-$(CONFIG_SBPCD)		+= sbpcd.o      cdrom.o

obj-$(CONFIG_SJCD)		+= sjcd.o

obj-$(CONFIG_CDU535)		+= sonycd535.o

obj-$(CONFIG_VIOCD)		+= viocd.o      cdrom.o