Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ab8dd3ae authored by Adam Ford's avatar Adam Ford Committed by Tony Lindgren
Browse files

ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV 



The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM.
While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not
obtain an FCC ID, so anyone who uses it will have to go through certification.

I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic
power management, however the overall current seems high.

Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 730d7dcf

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

0 → 100644
+268 −0
Original line number Diff line number Diff line 
/*

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/dts-v1/;



#include "omap36xx.dtsi"

#include "logicpd-som-lv.dtsi"

#include "omap-gpmc-smsc9221.dtsi"



/ {

	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";

	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";



	gpio_keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&gpio_key_pins>;



		sysboot2 {

			label = "gpio3";

			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */

			linux,code = <BTN_0>;

			wakeup-source;

		};

	};



	sound {

		compatible = "ti,omap-twl4030";

		ti,model = "omap3logic";

		ti,mcbsp = <&mcbsp2>;

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins &led_pins_wkup>;



		led1 {

			label = "led1";

			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */

			linux,default-trigger = "cpu0";

		};



		led2 {

			label = "led2";

			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */

			linux,default-trigger = "none";

		};

	};

};



&vaux1 {

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

};



&vaux4 {

	regulator-min-microvolt = <1800000>;

	regulator-max-microvolt = <1800000>;

};



&mcbsp2 {

	status = "okay";

};



&charger {

	ti,bb-uvolt = <3200000>;

	ti,bb-uamp = <150>;

};



&gpmc {

	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */



	ethernet@gpmc {

		pinctrl-names = "default";

		pinctrl-0 = <&lan9221_pins>;

		interrupt-parent = <&gpio5>;

		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */

		reg = <1 0 0xff>;

	};

};



&vpll2 {

	regulator-always-on;

};



&dss {

	status = "ok";

	vdds_dsi-supply = <&vpll2>;

	vdda_video-supply = <&video_reg>;

	pinctrl-names = "default";

	pinctrl-0 = <&dss_dpi_pins1>;

	port {

		dpi_out: endpoint {

			remote-endpoint = <&lcd_in>;

			data-lines = <16>;

		};

	};

};



/ {

	aliases {

		display0 = &lcd0;

	};



	video_reg: video_reg {

		compatible = "regulator-fixed";

		regulator-name = "fixed-supply";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	lcd0: display@0 {

		compatible = "panel-dpi";

		label = "28";

		status = "okay";

		/* default-on; */

		pinctrl-names = "default";

		pinctrl-0 = <&lcd_enable_pin>;

		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */

		port {

			lcd_in: endpoint {

				remote-endpoint = <&dpi_out>;

			};

		};



		panel-timing {

			clock-frequency = <9000000>;

			hactive = <480>;

			vactive = <272>;

			hfront-porch = <3>;

			hback-porch = <2>;

			hsync-len = <42>;

			vback-porch = <3>;

			vfront-porch = <2>;

			vsync-len = <11>;

			hsync-active = <1>;

			vsync-active = <1>;

			de-active = <1>;

			pixelclk-active = <0>;

		};

	};



	bl: backlight {

		compatible = "pwm-backlight";

		pinctrl-names = "default";

		pinctrl-0 = <&backlight_pins>;

		pwms = <&twl_pwm 0 5000000>;

		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

		default-brightness-level = <7>;

		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */

	};

};



&mmc1 {

	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins &mmc1_cd>;

	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */

	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */

	vmmc-supply = <&vmmc1>;

	bus-width = <4>;

	cap-power-off-card;

};



&omap3_pmx_core {

	gpio_key_pins: pinmux_gpio_key_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/

		>;

	};



	led_pins: pinmux_led_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */

		>;

	};



	lan9221_pins: pinmux_lan9221_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */

		>;

	};



	mmc1_pins: pinmux_mmc1_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */

			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */

			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */

			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */

			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */

			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */

			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/

		>;

	};



	lcd_enable_pin: pinmux_lcd_enable_pin {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */

		>;

	};



	dss_dpi_pins1: pinmux_dss_dpi_pins1 {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */

			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */

			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */

			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */



			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */

			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */

			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */

			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */

			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */

			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */

			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */

			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */

			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */

			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */

			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */

			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */

			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */

			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */

			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */

			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */

		>;

	};

};



&omap3_pmx_wkup {

	led_pins_wkup: pinmux_led_pins_wkup {

		pinctrl-single,pins = <

			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */

		>;

	};



	backlight_pins: pinmux_backlight_pins {

		pinctrl-single,pins = <

			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */

		>;

	};



	mmc1_cd: pinmux_mmc1_cd {

		pinctrl-single,pins = <

			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */

		>;

	};

};





&uart1 {

	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;

};



/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */

&usb_otg_hs {

	pinctrl-names = "default";

	pinctrl-0 = <&hsusb_otg_pins>;

	interface-type = <0>;

	usb-phy = <&usb2_phy>;

	phys = <&usb2_phy>;

	phy-names = "usb2-phy";

	mode = <3>;

	power = <50>;

};

arch/arm/boot/dts/logicpd-som-lv.dtsi

0 → 100644
+208 −0
Original line number Diff line number Diff line 
/*

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <dt-bindings/input/input.h>



/ {

	cpus {

		cpu@0 {

			cpu0-supply = <&vcc>;

		};

	};



	wl12xx_vmmc: wl12xx_vmmc {

		compatible = "regulator-fixed";

		regulator-name = "vwl1271";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&gpio1 3 0>;   /* gpio_3 */

		startup-delay-us = <70000>;

		enable-active-high;

		vin-supply = <&vmmc2>;

	};

};



&gpmc {

	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */



	nand@0,0 {

		linux,mtd-name = "micron,mt29f4g16abbda3w";

		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */

		nand-bus-width = <16>;

		ti,nand-ecc-opt = "bch8";

		gpmc,sync-clk-ps = <0>;

		gpmc,cs-on-ns = <0>;

		gpmc,cs-rd-off-ns = <44>;

		gpmc,cs-wr-off-ns = <44>;

		gpmc,adv-on-ns = <6>;

		gpmc,adv-rd-off-ns = <34>;

		gpmc,adv-wr-off-ns = <44>;

		gpmc,we-off-ns = <40>;

		gpmc,oe-off-ns = <54>;

		gpmc,access-ns = <64>;

		gpmc,rd-cycle-ns = <82>;

		gpmc,wr-cycle-ns = <82>;

		gpmc,wr-access-ns = <40>;

		gpmc,wr-data-mux-bus-ns = <0>;

		gpmc,device-width = <2>;



		gpmc,page-burst-access-ns = <5>;

		gpmc,cycle2cycle-delay-ns = <50>;



		#address-cells = <1>;

		#size-cells = <1>;



		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */



		x-loader@0 {

			label = "x-loader";

			reg = <0 0x80000>;

		};



		bootloaders@80000 {

			label = "u-boot";

			reg = <0x80000 0x1e0000>;

		};



		bootloaders_env@260000 {

			label = "u-boot-env";

			reg = <0x260000 0x20000>;

		};



		kernel@280000 {

			label = "kernel";

			reg = <0x280000 0x400000>;

		};



		filesystem@680000 {

			label = "fs";

			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */

		};

	};

};



&i2c1 {

	clock-frequency = <2600000>;



	twl: twl@48 {

		reg = <0x48>;

		interrupts = <7>; /* SYS_NIRQ cascaded to intc */

		interrupt-parent = <&intc>;

		twl_audio: audio {

			compatible = "ti,twl4030-audio";

			codec {

			};

		};

	};

};



&i2c2 {

	clock-frequency = <400000>;

};



&i2c3 {

	clock-frequency = <400000>;

};



&mmc3 {

	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;

	pinctrl-0 = <&mmc3_pins>;

	pinctrl-names = "default";

	vmmc-supply = <&wl12xx_vmmc>;

	non-removable;

	bus-width = <4>;

	cap-power-off-card;

	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1273";

		reg = <2>;

		interrupt-parent = <&gpio5>;

		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */

		ref-clock-frequency = <26000000>;

	};

};



&omap3_pmx_core {

	mmc3_pins: pinmux_mm3_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */

			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */

			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */

			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */

			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */

			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */

			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */

			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */

		>;

	};

	mcbsp2_pins: pinmux_mcbsp2_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */

			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */

			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */

			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */

		>;

	};

	uart2_pins: pinmux_uart2_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */

			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/

			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */

			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */

			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */

		>;

	};

	mcspi1_pins: pinmux_mcspi1_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */

			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */

			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */

			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */

		>;

	};

	hsusb_otg_pins: pinmux_hsusb_otg_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */

			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */

			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */

			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */

			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */

			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */

			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */

			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */

			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */

			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */

			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */

			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */

		>;

	};

};



&uart2 {

	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins>;

};



&mcspi1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcspi1_pins>;

};



#include "twl4030.dtsi"

#include "twl4030_omap3.dtsi"



&twl {

	twl_power: power {

		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";

		ti,use_poweroff;

	};

};



&twl_gpio {

	ti,use-leds;

};