[media] lmedm04: driver for DM04/QQBOX updated to version 1.60 (ab599a6d) · Commits · e / devices / android_kernel_teracube_mt6765

Documentation/dvb/lmedm04.txt

+6 −3

Original line number	Diff line number	Diff line
		@@ -45,10 +45,13 @@ and run

		Other LG firmware can be extracted manually from US280D.sys
		only found in windows/system32/driver.
		However, this firmware does not run very well under Windows
		or with the Linux driver.

		dd if=US280D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-lg.fw
		dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw

		for DM04 LME2510C (LG Tuner)
		---------------------------

		dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw

		---------------------------------------------------------------------

drivers/media/dvb/dvb-usb/Kconfig

+0 −1

Original line number	Diff line number	Diff line
		@@ -356,6 +356,5 @@ config DVB_USB_LME2510
		select DVB_TDA826X if !DVB_FE_CUSTOMISE
		select DVB_STV0288 if !DVB_FE_CUSTOMISE
		select DVB_IX2505V if !DVB_FE_CUSTOMISE
		depends on IR_CORE
		help
		Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .

drivers/media/dvb/dvb-usb/lmedm04.c

+222 −70

Original line number	Diff line number	Diff line
		/* DVB USB compliant linux driver for
		*
		* DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
		* LME2510 + LGTDQT-P001F
		* LME2510C + LG TDQY-P001F
		* LME2510 + LG TDQY-P001F
		*
		* MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
		* SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
		@@ -9,6 +10,8 @@
		* MV001F (LME2510+LGTDQY-P001F)
		* LG TDQY - P001F =(TDA8263 + TDA10086H)
		*
		* MVB0001F (LME2510C+LGTDQT-P001F)
		*
		* For firmware see Documentation/dvb/lmedm04.txt
		*
		* I2C addresses:
		@@ -21,7 +24,6 @@
		* *Please Note*
		* There are other variants of the DM04
		* *NOT SUPPORTED*
		* MVB0001F (LME2510C+LGTDQT-P001F)
		* MV0194 (LME2510+SHARP0194)
		* MVB0194 (LME2510C+SHARP0194)
		*
		@@ -51,10 +53,7 @@
		* LME2510: Non Intel USB chipsets fail to maintain High Speed on
		* Boot or Hot Plug.
		*
		* DiSEqC functions are not fully supported in this driver. The main
		* reason is the frontend is cut off during streaming. Allowing frontend
		* access will stall the driver. Applications that attempt to this, the
		* commands are ignored.
		* QQbox suffers from noise on LNB voltage.
		*
		* PID functions have been removed from this driver version due to
		* problems with different firmware and application versions.
		@@ -91,6 +90,11 @@ module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
		MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."
		DVB_USB_DEBUG_STATUS);

		static int dvb_usb_lme2510_firmware;
		module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
		MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");


		DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
		#define TUNER_LG 0x1
		#define TUNER_S7395 0x2
		@@ -107,6 +111,8 @@ struct lme2510_state {
		u8 i2c_tuner_gate_w;
		u8 i2c_tuner_gate_r;
		u8 i2c_tuner_addr;
		u8 stream_on;
		u8 one_tune;
		void *buffer;
		struct urb *lme_urb;
		void *usb_buffer;
		@@ -117,6 +123,7 @@ static int lme2510_bulk_write(struct usb_device *dev,
		u8 *snd, int len, u8 pipe)
		{
		int ret, actual_l;

		ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
		snd, len , &actual_l, 500);
		return ret;
		@@ -151,22 +158,21 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
		/* the read/write capped at 512 */
		memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen);


		ret = mutex_lock_interruptible(&d->usb_mutex);

		if (ret < 0)
		return -EAGAIN;

		ret \|= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01));
		msleep(5);
		ret \|= lme2510_bulk_write(d->udev, buff, wlen , 0x1);

		msleep(5);
		ret \|= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x1));
		ret \|= lme2510_bulk_write(d->udev, buff, wlen , 0x01);

		msleep(12);

		ret \|= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01));

		msleep(5);
		ret \|= lme2510_bulk_read(d->udev, buff, (rlen > 512) ?
		512 : rlen , 0x1);
		512 : rlen , 0x01);

		if (rlen > 0)
		memcpy(rbuf, buff, rlen);
		@@ -176,6 +182,18 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
		return (ret < 0) ? -ENODEV : 0;
		}

		static int lme2510_usb_talk_restart(struct dvb_usb_device *d,
		u8 wbuf, int wlen, u8 rbuf, int rlen) {
		static u8 stream_on[] = LME_ST_ON_W;
		int ret;
		u8 rbuff[10];
		/Send Normal Command/
		ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
		/Restart Stream Command/
		ret \|= lme2510_usb_talk(d, stream_on, sizeof(stream_on),
		rbuff, sizeof(rbuff));
		return ret;
		}
		static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
		{
		struct dvb_usb_device *d = adap->dev;
		@@ -213,7 +231,6 @@ static void lme2510_int_response(struct urb *lme_urb)
		offset = ((lme_urb->actual_length/8) > 4)
		? 4 : (lme_urb->actual_length/8) ;


		for (i = 0; i < offset; ++i) {
		ibuf = (u8 )&rbuf[i8];
		deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
		@@ -228,6 +245,7 @@ static void lme2510_int_response(struct urb *lme_urb)
		case 0xbb:
		switch (st->tuner_config) {
		case TUNER_LG:
		if (ibuf[2] > 0)
		st->signal_lock = ibuf[2];
		st->signal_level = ibuf[4];
		st->signal_sn = ibuf[3];
		@@ -237,7 +255,7 @@ static void lme2510_int_response(struct urb *lme_urb)
		/* Tweak for earlier firmware*/
		if (ibuf[1] == 0x03) {
		st->signal_level = ibuf[3];
		st->signal_sn = ibuf[2];
		st->signal_sn = ibuf[4];
		} else {
		st->signal_level = ibuf[4];
		st->signal_sn = ibuf[5];
		@@ -295,6 +313,7 @@ static int lme2510_return_status(struct usb_device *dev)
		{
		int ret = 0;
		u8 data[10] = {0};

		ret \|= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
		0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
		info("Firmware Status: %x (%x)", ret , data[2]);
		@@ -308,25 +327,48 @@ static int lme2510_msg(struct dvb_usb_device *d,
		int ret = 0;
		struct lme2510_state *st = d->priv;

		if (st->i2c_talk_onoff == 1) {
		if ((wbuf[2] == 0x1c) & (wbuf[3] == 0x0e))
		msleep(80); /take your time when waiting for tune/

		if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
		return -EAGAIN;

		if (st->i2c_talk_onoff == 1) {

		ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);

		mutex_unlock(&d->i2c_mutex);
		switch (st->tuner_config) {
		case TUNER_LG:
		if (wbuf[2] == 0x1c) {
		if (wbuf[3] == 0x0e) {
		st->signal_lock = rbuf[1];
		if ((st->stream_on & 1) &&
		(st->signal_lock & 0x10)) {
		lme2510_usb_talk_restart(d,
		wbuf, wlen, rbuf, rlen);
		st->i2c_talk_onoff = 0;
		}
		msleep(80);
		}
		}
		break;
		case TUNER_S7395:
		if (wbuf[3] == 0x24)
		if (wbuf[2] == 0xd0) {
		if (wbuf[3] == 0x24) {
		st->signal_lock = rbuf[1];
		if ((st->stream_on & 1) &&
		(st->signal_lock & 0x8)) {
		lme2510_usb_talk_restart(d,
		wbuf, wlen, rbuf, rlen);
		st->i2c_talk_onoff = 0;
		}
		}
		if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5))
		msleep(5);


		}
		break;
		default:
		break;
		}

		} else {
		switch (st->tuner_config) {
		case TUNER_LG:
		@@ -343,6 +385,17 @@ static int lme2510_msg(struct dvb_usb_device *d,
		rbuf[0] = 0x55;
		rbuf[1] = st->signal_sn;
		break;
		/DiSEqC functions as per TDA10086/
		case 0x36:
		case 0x48:
		case 0x49:
		case 0x4a:
		case 0x4b:
		case 0x4c:
		case 0x4d:
		if (wbuf[2] == 0x1c)
		lme2510_usb_talk_restart(d,
		wbuf, wlen, rbuf, rlen);
		default:
		break;
		}
		@@ -362,7 +415,31 @@ static int lme2510_msg(struct dvb_usb_device *d,
		rbuf[0] = 0x55;
		rbuf[1] = (st->signal_level & 0x80)
		? 0 : st->signal_lock;
		break;
		case 0x6:
		if (wbuf[2] == 0xd0)
		lme2510_usb_talk(d,
		wbuf, wlen, rbuf, rlen);
		break;
		case 0x1:
		if (st->one_tune > 0)
		break;
		st->one_tune++;
		st->i2c_talk_onoff = 1;
		/DiSEqC functions as per STV0288/
		case 0x5:
		case 0x7:
		case 0x8:
		case 0x9:
		case 0xa:
		case 0xb:
		if (wbuf[2] == 0xd0)
		lme2510_usb_talk_restart(d,
		wbuf, wlen, rbuf, rlen);
		break;
		default:
		rbuf[0] = 0x55;
		rbuf[1] = 0x00;
		break;
		}
		break;
		@@ -376,6 +453,8 @@ static int lme2510_msg(struct dvb_usb_device *d,

		}

		mutex_unlock(&d->i2c_mutex);

		return ret;
		}

		@@ -469,29 +548,34 @@ static int lme2510_identify_state(struct usb_device *udev,
		static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
		{
		struct lme2510_state *st = adap->dev->priv;
		static u8 reset[] = LME_RESET;
		static u8 stream_on[] = LME_ST_ON_W;
		static u8 clear_reg_3[] = LME_CLEAR_PID;
		static u8 rbuf[1];
		static u8 timeout;
		int ret = 0, len = 2, rlen = sizeof(rbuf);

		deb_info(1, "STM (%02x)", onoff);

		if (onoff == 1) {
		st->i2c_talk_onoff = 0;
		msleep(400); /* give enough time for i2c to stop */
		timeout = 0;
		/* wait for i2C to be free */
		while (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) {
		timeout++;
		if (timeout > 5)
		return -ENODEV;
		}
		msleep(100);
		ret \|= lme2510_usb_talk(adap->dev,
		stream_on, len, rbuf, rlen);
		st->stream_on = 1;
		st->one_tune = 0;
		mutex_unlock(&adap->dev->i2c_mutex);
		} else {
		deb_info(1, "STM Steam Off");
		if (st->tuner_config == TUNER_LG)
		ret \|= lme2510_usb_talk(adap->dev, clear_reg_3,
		sizeof(clear_reg_3), rbuf, rlen);
		else
		ret \|= lme2510_usb_talk(adap->dev,
		reset, sizeof(reset), rbuf, rlen);

		msleep(400);
		st->stream_on = 0;
		st->i2c_talk_onoff = 1;
		}

		@@ -604,6 +688,63 @@ static int lme2510_download_firmware(struct usb_device *dev,
		return (ret < 0) ? -ENODEV : 0;
		}

		/* Default firmware for LME2510C */
		const char lme_firmware[50] = "dvb-usb-lme2510c-s7395.fw";

		static void lme_coldreset(struct usb_device *dev)
		{
		int ret = 0, len_in;
		u8 data[512] = {0};

		data[0] = 0x0a;
		len_in = 1;
		info("FRM Firmware Cold Reset");
		ret \|= lme2510_bulk_write(dev, data , len_in, 1); /Cold Resetting/
		ret \|= lme2510_bulk_read(dev, data, len_in, 1);
		return;
		}

		static void lme_firmware_switch(struct usb_device *udev, int cold)
		{
		const struct firmware *fw = NULL;
		char lme2510c_s7395[] = "dvb-usb-lme2510c-s7395.fw";
		char lme2510c_lg[] = "dvb-usb-lme2510c-lg.fw";
		char *firm_msg[] = {"Loading", "Switching to"};
		int ret;

		if (udev->descriptor.idProduct == 0x1122)
		return;

		switch (dvb_usb_lme2510_firmware) {
		case 0:
		default:
		memcpy(&lme_firmware, lme2510c_s7395, sizeof(lme2510c_s7395));
		ret = request_firmware(&fw, lme_firmware, &udev->dev);
		if (ret == 0) {
		info("FRM %s S7395 Firmware", firm_msg[cold]);
		break;
		}
		if (cold == 0)
		dvb_usb_lme2510_firmware = 1;
		else
		cold = 0;
		case 1:
		memcpy(&lme_firmware, lme2510c_lg, sizeof(lme2510c_lg));
		ret = request_firmware(&fw, lme_firmware, &udev->dev);
		if (ret == 0) {
		info("FRM %s LG Firmware", firm_msg[cold]);
		break;
		}
		info("FRM No Firmware Found - please install");
		dvb_usb_lme2510_firmware = 0;
		cold = 0;
		break;
		}
		release_firmware(fw);
		if (cold)
		lme_coldreset(udev);
		return;
		}

		static int lme2510_kill_urb(struct usb_data_stream *stream)
		{
		@@ -638,7 +779,6 @@ static struct ix2505v_config lme_tuner = {
		.tuner_chargepump = 0x3,
		};


		static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
		fe_sec_voltage_t voltage)
		{
		@@ -646,32 +786,25 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
		struct lme2510_state *st = adap->dev->priv;
		static u8 voltage_low[] = LME_VOLTAGE_L;
		static u8 voltage_high[] = LME_VOLTAGE_H;
		static u8 reset[] = LME_RESET;
		static u8 clear_reg_3[] = LME_CLEAR_PID;
		static u8 lnb_on[] = LNB_ON;
		static u8 lnb_off[] = LNB_OFF;
		static u8 rbuf[1];
		int ret = 0, len = 3, rlen = 1;

		msleep(100);
		if (st->stream_on == 1)
		return 0;

		if (st->tuner_config == TUNER_LG)
		ret \|= lme2510_usb_talk(adap->dev, clear_reg_3,
		sizeof(clear_reg_3), rbuf, rlen);
		else
		ret \|= lme2510_usb_talk(adap->dev,
		reset, sizeof(reset), rbuf, rlen);

		/always check & stop streaming/
		lme2510_kill_urb(&adap->stream);
		adap->feedcount = 0;
		ret \|= lme2510_usb_talk(adap->dev, lnb_on, len, rbuf, rlen);

		switch (voltage) {

		case SEC_VOLTAGE_18:
		ret \|= lme2510_usb_talk(adap->dev,
		voltage_high, len, rbuf, rlen);
		break;

		case SEC_VOLTAGE_OFF:
		ret \|= lme2510_usb_talk(adap->dev,
		lnb_off, len, rbuf, rlen);
		case SEC_VOLTAGE_13:
		default:
		ret \|= lme2510_usb_talk(adap->dev,
		@@ -714,6 +847,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
		&adap->dev->i2c_adap, 1)) {
		info("TUN TDA8263 Found");
		st->tuner_config = TUNER_LG;
		if (dvb_usb_lme2510_firmware != 1) {
		dvb_usb_lme2510_firmware = 1;
		lme_firmware_switch(adap->dev->udev, 1);
		}
		return 0;
		}
		kfree(adap->fe);
		@@ -735,6 +872,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
		&adap->dev->i2c_adap)) {
		st->tuner_config = TUNER_S7395;
		info("TUN Sharp IX2505V silicon tuner");
		if (dvb_usb_lme2510_firmware != 0) {
		dvb_usb_lme2510_firmware = 0;
		lme_firmware_switch(adap->dev->udev, 1);
		}
		return 0;
		}
		kfree(adap->fe);
		@@ -772,6 +913,8 @@ static int lme2510_probe(struct usb_interface *intf,
		return -ENODEV;
		}

		lme_firmware_switch(udev, 0);

		if (0 == dvb_usb_device_init(intf, &lme2510_properties,
		THIS_MODULE, NULL, adapter_nr)) {
		info("DEV registering device driver");
		@@ -839,7 +982,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
		.usb_ctrl = DEVICE_SPECIFIC,
		.download_firmware = lme2510_download_firmware,
		.firmware = "dvb-usb-lme2510c-s7395.fw",
		.firmware = lme_firmware,
		.size_of_priv = sizeof(struct lme2510_state),
		.num_adapters = 1,
		.adapter = {
		@@ -849,7 +992,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
		/* parameter for the MPEG2-data transfer */
		.stream = {
		.type = USB_BULK,
		.count = 8,
		.count = 10,
		.endpoint = 0x8,
		.u = {
		.bulk = {
		@@ -872,15 +1015,23 @@ static struct dvb_usb_device_properties lme2510c_properties = {
		}
		};

		void lme2510_exit_int(struct dvb_usb_device *d)
		void lme2510_exit_int(struct dvb_usb_device d)
		{
		struct lme2510_state *st = d->priv;
		struct dvb_usb_adapter *adap = &d->adapter[0];
		void *buffer = NULL;

		if (adap != NULL) {
		lme2510_kill_urb(&adap->stream);
		adap->feedcount = 0;
		}

		if (st->lme_urb != NULL) {
		st->i2c_talk_onoff = 0;
		st->i2c_talk_onoff = 1;
		st->signal_lock = 0;
		st->signal_level = 0;
		st->signal_sn = 0;
		kfree(st->usb_buffer);
		buffer = st->usb_buffer;
		usb_kill_urb(st->lme_urb);
		usb_free_coherent(d->udev, 5000, st->buffer,
		st->lme_urb->transfer_dma);
		@@ -888,18 +1039,19 @@ void lme2510_exit_int(struct dvb_usb_device *d)
		ir_input_unregister(d->rc_input_dev);
		info("Remote Stopped");
		}
		return;
		return buffer;
		}

		void lme2510_exit(struct usb_interface *intf)
		{
		struct dvb_usb_device *d = usb_get_intfdata(intf);
		void *usb_buffer;

		if (d != NULL) {
		d->adapter[0].feedcount = 0;
		lme2510_exit_int(d);
		usb_buffer = lme2510_exit_int(d);
		dvb_usb_device_exit(intf);
		kfree(usb_buffer);
		}

		}

		static struct usb_driver lme2510_driver = {
		@@ -932,5 +1084,5 @@ module_exit(lme2510_module_exit);

		MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
		MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
		MODULE_VERSION("1.4");
		MODULE_VERSION("1.60");
		MODULE_LICENSE("GPL");

drivers/media/dvb/dvb-usb/lmedm04.h

+15 −29

Original line number	Diff line number	Diff line
		/* DVB USB compliant linux driver for
		*
		* DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
		* LME2510C + LGTDQT-P001F
		* LME2510C + LG TDQY-P001F
		* LME2510 + LG TDQY-P001F
		*
		* MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
		* SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
		*
		* MVB0001F (LME2510C+LGTDQT-P001F)
		* MVB001F (LME2510+LGTDQT-P001F)
		* LG TDQY - P001F =(TDA8263 + TDA10086H)
		*
		* MVB0001F (LME2510C+LGTDQT-P001F)
		*
		* This program is free software; you can redistribute it and/or modify it
		* under the terms of the GNU General Public License as published by the Free
		@@ -35,35 +37,33 @@
		* end byte -1 = 20
		* end byte = clear pid always a0, other wise 9c, 9a ??
		*
		* RESET (also clears PID filter)
		* 3a 01 00
		*/
		#define LME_ST_ON_W {0x06, 0x00}
		#define LME_RESET {0x3a, 0x01, 0x00}
		#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0}


		/* LME Power Control
		/* LNB Voltage
		* 07 XX XX
		* offset 1 = 01 Power? my device cannot be powered down
		* offset 1 = 01
		* offset 2 = 00=Voltage low 01=Voltage high
		*
		* LNB Power
		* 03 01 XX
		* offset 2 = 00=ON 01=OFF
		*/

		#define LME_VOLTAGE_L {0x07, 0x01, 0x00}
		#define LME_VOLTAGE_H {0x07, 0x01, 0x01}

		#define LNB_ON {0x3a, 0x01, 0x00}
		#define LNB_OFF {0x3a, 0x01, 0x01}

		/* Initial stv0288 settings for 7395 Frontend */
		static u8 s7395_inittab[] = {
		0x00, 0x11,
		0x01, 0x15,
		0x02, 0x20,
		0x03, 0x8e,
		0x04, 0x8e,
		0x03, 0xa0,
		0x04, 0xa0,
		0x05, 0x12,
		0x06, 0xff,
		0x07, 0x20,
		0x08, 0x00,
		0x06, 0x00,
		0x09, 0x00,
		0x0a, 0x04,
		0x0b, 0x00,
		@@ -71,7 +71,6 @@ static u8 s7395_inittab[] = {
		0x0d, 0x00,
		0x0e, 0xc1,
		0x0f, 0x54,
		0x10, 0x40,
		0x11, 0x7a,
		0x12, 0x03,
		0x13, 0x48,
		@@ -84,23 +83,15 @@ static u8 s7395_inittab[] = {
		0x1a, 0x88,
		0x1b, 0x8f,
		0x1c, 0xf0,
		0x1e, 0x80,
		0x20, 0x0b,
		0x21, 0x54,
		0x22, 0xff,
		0x23, 0x01,
		0x24, 0x9a,
		0x25, 0x7f,
		0x26, 0x00,
		0x27, 0x00,
		0x28, 0x46,
		0x29, 0x66,
		0x2a, 0x90,
		0x2b, 0xfa,
		0x2c, 0xd9,
		0x2d, 0x02,
		0x2e, 0xb1,
		0x2f, 0x00,
		0x30, 0x0,
		0x31, 0x1e,
		0x32, 0x14,
		@@ -115,8 +106,6 @@ static u8 s7395_inittab[] = {
		0x3b, 0x13,
		0x3c, 0x11,
		0x3d, 0x30,
		0x3e, 0x00,
		0x3f, 0x00,
		0x40, 0x63,
		0x41, 0x04,
		0x42, 0x60,
		@@ -126,8 +115,6 @@ static u8 s7395_inittab[] = {
		0x46, 0x00,
		0x47, 0x00,
		0x4a, 0x00,
		0x4b, 0xd1,
		0x4c, 0x33,
		0x50, 0x12,
		0x51, 0x36,
		0x52, 0x21,
		@@ -183,5 +170,4 @@ static u8 s7395_inittab[] = {
		0xf2, 0xc0,
		0xff, 0xff,
		};

		#endif