Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 71fe5cca authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined
  mmc: sdhci-s3c: Remove old and misprototyped suspend operations
  mmc: tmio: fix clock gating on platforms with a .set_pwr() method
  mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method
  mmc: core: Fix typo at mmc_card_sleep
  mmc: core: Fix power_off_notify during suspend
  mmc: core: Fix setting power notify state variable for non-eMMC
  mmc: core: Add quirk for long data read time
  mmc: Add module.h include to sdhci-cns3xxx.c
  mmc: mxcmmc: fix falling back to PIO
  mmc: omap_hsmmc: DMA unmap only once in case of MMC error
parents dc47ce90 49df7807

drivers/mmc/card/block.c

+8 −0
Original line number Diff line number Diff line
@@ -1606,6 +1606,14 @@ static const struct mmc_fixup blk_fixups[] = 
		  MMC_QUIRK_BLK_NO_CMD23),

	MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc,

		  MMC_QUIRK_BLK_NO_CMD23),



	/*

	 * Some Micron MMC cards needs longer data read timeout than

	 * indicated in CSD.

	 */

	MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc,

		  MMC_QUIRK_LONG_READ_TIME),



	END_FIXUP

};

drivers/mmc/core/core.c

+64 −34
Original line number Diff line number Diff line
@@ -529,6 +529,18 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) 
			data->timeout_clks = 0;

		}

	}



	/*

	 * Some cards require longer data read timeout than indicated in CSD.

	 * Address this by setting the read timeout to a "reasonably high"

	 * value. For the cards tested, 300ms has proven enough. If necessary,

	 * this value can be increased if other problematic cards require this.

	 */

	if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {

		data->timeout_ns = 300000000;

		data->timeout_clks = 0;

	}



	/*

	 * Some cards need very high timeouts if driven in SPI mode.

	 * The worst observed timeout was 900ms after writing a
@@ -1213,6 +1225,46 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) 
	mmc_host_clk_release(host);

}



static void mmc_poweroff_notify(struct mmc_host *host)

{

	struct mmc_card *card;

	unsigned int timeout;

	unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION;

	int err = 0;



	card = host->card;



	/*

	 * Send power notify command only if card

	 * is mmc and notify state is powered ON

	 */

	if (card && mmc_card_mmc(card) &&

	    (card->poweroff_notify_state == MMC_POWERED_ON)) {



		if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {

			notify_type = EXT_CSD_POWER_OFF_SHORT;

			timeout = card->ext_csd.generic_cmd6_time;

			card->poweroff_notify_state = MMC_POWEROFF_SHORT;

		} else {

			notify_type = EXT_CSD_POWER_OFF_LONG;

			timeout = card->ext_csd.power_off_longtime;

			card->poweroff_notify_state = MMC_POWEROFF_LONG;

		}



		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,

				 EXT_CSD_POWER_OFF_NOTIFICATION,

				 notify_type, timeout);



		if (err && err != -EBADMSG)

			pr_err("Device failed to respond within %d poweroff "

			       "time. Forcefully powering down the device\n",

			       timeout);



		/* Set the card state to no notification after the poweroff */

		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;

	}

}



/*

 * Apply power to the MMC stack.  This is a two-stage process.

 * First, we enable power to the card without the clock running.
@@ -1269,42 +1321,12 @@ static void mmc_power_up(struct mmc_host *host) 


void mmc_power_off(struct mmc_host *host)

{

	struct mmc_card *card;

	unsigned int notify_type;

	unsigned int timeout;

	int err;



	mmc_host_clk_hold(host);



	card = host->card;

	host->ios.clock = 0;

	host->ios.vdd = 0;



	if (card && mmc_card_mmc(card) &&

	    (card->poweroff_notify_state == MMC_POWERED_ON)) {



		if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {

			notify_type = EXT_CSD_POWER_OFF_SHORT;

			timeout = card->ext_csd.generic_cmd6_time;

			card->poweroff_notify_state = MMC_POWEROFF_SHORT;

		} else {

			notify_type = EXT_CSD_POWER_OFF_LONG;

			timeout = card->ext_csd.power_off_longtime;

			card->poweroff_notify_state = MMC_POWEROFF_LONG;

		}



		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,

				 EXT_CSD_POWER_OFF_NOTIFICATION,

				 notify_type, timeout);



		if (err && err != -EBADMSG)

			pr_err("Device failed to respond within %d poweroff "

			       "time. Forcefully powering down the device\n",

			       timeout);



		/* Set the card state to no notification after the poweroff */

		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;

	}

	mmc_poweroff_notify(host);



	/*

	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2196,7 +2218,7 @@ int mmc_card_sleep(struct mmc_host *host) 


	mmc_bus_get(host);



	if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)

	if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep)

		err = host->bus_ops->sleep(host);



	mmc_bus_put(host);
@@ -2302,8 +2324,17 @@ int mmc_suspend_host(struct mmc_host *host) 
		 * pre-claim the host.

		 */

		if (mmc_try_claim_host(host)) {

			if (host->bus_ops->suspend)

			if (host->bus_ops->suspend) {

				/*

				 * For eMMC 4.5 device send notify command

				 * before sleep, because in sleep state eMMC 4.5

				 * devices respond to only RESET and AWAKE cmd

				 */

				mmc_poweroff_notify(host);

				err = host->bus_ops->suspend(host);

			}

			mmc_do_release_host(host);



			if (err == -ENOSYS || !host->bus_ops->resume) {

				/*

				 * We simply "remove" the card in this case.
@@ -2318,7 +2349,6 @@ int mmc_suspend_host(struct mmc_host *host) 
				host->pm_flags = 0;

				err = 0;

			}

			mmc_do_release_host(host);

		} else {

			err = -EBUSY;

		}

drivers/mmc/core/mmc.c

+8 −4
Original line number Diff line number Diff line
@@ -876,17 +876,21 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, 
	 * set the notification byte in the ext_csd register of device

	 */

	if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&

	    (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {

	    (card->ext_csd.rev >= 6)) {

		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,

				 EXT_CSD_POWER_OFF_NOTIFICATION,

				 EXT_CSD_POWER_ON,

				 card->ext_csd.generic_cmd6_time);

		if (err && err != -EBADMSG)

			goto free_card;

	}



		/*

		 * The err can be -EBADMSG or 0,

		 * so check for success and update the flag

		 */

		if (!err)

			card->poweroff_notify_state = MMC_POWERED_ON;

	}



	/*

	 * Activate high speed (if supported)

drivers/mmc/host/mxcmmc.c

+1 −0
Original line number Diff line number Diff line
@@ -732,6 +732,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 
				"failed to config DMA channel. Falling back to PIO\n");

			dma_release_channel(host->dma);

			host->do_dma = 0;

			host->dma = NULL;

		}

	}

drivers/mmc/host/omap_hsmmc.c

+5 −2
Original line number Diff line number Diff line
@@ -1010,6 +1010,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) 
			host->data->sg_len,

			omap_hsmmc_get_dma_dir(host, host->data));

		omap_free_dma(dma_ch);

		host->data->host_cookie = 0;

	}

	host->data = NULL;

}
@@ -1575,7 +1576,9 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, 
	struct mmc_data *data = mrq->data;



	if (host->use_dma) {

		dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,

		if (data->host_cookie)

			dma_unmap_sg(mmc_dev(host->mmc), data->sg,

				     data->sg_len,

				     omap_hsmmc_get_dma_dir(host, data));

		data->host_cookie = 0;

	}