Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2016d52a authored by Mark Brown's avatar Mark Brown
Browse files

Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/lantiq-ssc',... 

Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/lantiq-ssc', 'spi/topic/mpc52xx', 'spi/topic/ppc4xx' and 'spi/topic/pxa2xx' into spi-next
parents 34706500 66459c5a 30fb2723 9c4f0440 797236f1 64e02cb0

Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt

0 → 100644
+29 −0
Original line number Diff line number Diff line 
Lantiq Synchronous Serial Controller (SSC) SPI master driver



Required properties:

- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi"

- #address-cells: see spi-bus.txt

- #size-cells: see spi-bus.txt

- reg: address and length of the spi master registers

- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt.





Optional properties:

- clocks: spi clock phandle

- num-cs: see spi-bus.txt, set to 8 if unset

- base-cs: the number of the first chip select, set to 1 if unset.



Example:





spi: spi@E100800 {

	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";

	reg = <0xE100800 0x100>;

	interrupt-parent = <&icu0>;

	interrupts = <22 23 24>;

	interrupt-names = "spi_rx", "spi_tx", "spi_err";

	#address-cells = <1>;

	#size-cells = <1>;

	num-cs = <6>;

	base-cs = <1>;

};

drivers/spi/Kconfig

+8 −0
Original line number Diff line number Diff line
@@ -417,6 +417,14 @@ config SPI_NUC900 
	help

	  SPI driver for Nuvoton NUC900 series ARM SoCs



config SPI_LANTIQ_SSC

	tristate "Lantiq SSC SPI controller"

	depends on LANTIQ || COMPILE_TEST

	help

	  This driver supports the Lantiq SSC SPI controller in master

	  mode. This controller is found on Intel (former Lantiq) SoCs like

	  the Danube, Falcon, xRX200, xRX300.



config SPI_OC_TINY

	tristate "OpenCores tiny SPI"

	depends on GPIOLIB || COMPILE_TEST

drivers/spi/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o 
obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o

obj-$(CONFIG_SPI_IMG_SPFI)		+= spi-img-spfi.o

obj-$(CONFIG_SPI_IMX)			+= spi-imx.o

obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o

obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o

obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o

obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o

drivers/spi/spi-imx.c

+8 −8
Original line number Diff line number Diff line
@@ -211,7 +211,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, 
			 struct spi_transfer *transfer)

{

	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);

	unsigned int bpw;

	unsigned int bpw, i;



	if (!master->dma_rx)

		return false;
@@ -228,12 +228,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, 
	if (bpw != 1 && bpw != 2 && bpw != 4)

		return false;



	if (transfer->len < spi_imx->wml * bpw)

		return false;

	for (i = spi_imx_get_fifosize(spi_imx) / 2; i > 0; i--) {

		if (!(transfer->len % (i * bpw)))

			break;

	}



	if (transfer->len % (spi_imx->wml * bpw))

	if (i == 0)

		return false;



	spi_imx->wml = i;



	return true;

}
@@ -837,10 +841,6 @@ static int spi_imx_dma_configure(struct spi_master *master, 
	struct dma_slave_config rx = {}, tx = {};

	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);



	if (bytes_per_word == spi_imx->bytes_per_word)

		/* Same as last time */

		return 0;



	switch (bytes_per_word) {

	case 4:

		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;