Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f46fc8cd authored by Guenter Roeck's avatar Guenter Roeck Committed by Jean Delvare
Browse files

hwmon: Add 3 critical limit attributes to sysfs-interface 



Added _lcrit and _crit to voltage attributes. 
Added _lcrit to temperature attributes.

Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 28cbd461

Documentation/hwmon/sysfs-interface

+20 −1
Original line number Diff line number Diff line
@@ -107,10 +107,24 @@ in[0-*]_min Voltage min value. 
		Unit: millivolt

		RW

		

in[0-*]_lcrit	Voltage critical min value.

		Unit: millivolt

		RW

		If voltage drops to or below this limit, the system may

		take drastic action such as power down or reset. At the very

		least, it should report a fault.



in[0-*]_max	Voltage max value.

		Unit: millivolt

		RW

		

in[0-*]_crit	Voltage critical max value.

		Unit: millivolt

		RW

		If voltage reaches or exceeds this limit, the system may

		take drastic action such as power down or reset. At the very

		least, it should report a fault.



in[0-*]_input	Voltage input value.

		Unit: millivolt

		RO
@@ -284,7 +298,7 @@ temp[1-*]_input Temperature input value. 
		Unit: millidegree Celsius

		RO



temp[1-*]_crit	Temperature critical value, typically greater than

temp[1-*]_crit	Temperature critical max value, typically greater than

		corresponding temp_max values.

		Unit: millidegree Celsius

		RW
@@ -296,6 +310,11 @@ temp[1-*]_crit_hyst 
		from the critical value.

		RW



temp[1-*]_lcrit	Temperature critical min value, typically lower than

		corresponding temp_min values.

		Unit: millidegree Celsius

		RW



temp[1-*]_offset

		Temperature offset which is added to the temperature reading

		by the chip.