Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit e37d4dff authored by Bob Copeland's avatar Bob Copeland Committed by John W. Linville
Browse files

mac80211: fix a few typos in mac80211 kernel doc 



Correct a handful of errors found while reading the mac80211 book.

Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Acked-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 55887511

include/net/mac80211.h

+6 −6
Original line number Diff line number Diff line
@@ -99,7 +99,7 @@ enum ieee80211_max_queues { 
 * The information provided in this structure is required for QoS

 * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.

 *

 * @aifs: arbitration interface space [0..255]

 * @aifs: arbitration interframe space [0..255]

 * @cw_min: minimum contention window [a value of the form

 *	2^n-1 in the range 1..32767]

 * @cw_max: maximum contention window [like @cw_min]
@@ -950,7 +950,7 @@ static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev 
}



/**

 * SET_IEEE80211_PERM_ADDR - set the permanenet MAC address for 802.11 hardware

 * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware

 *

 * @hw: the &struct ieee80211_hw to set the MAC address for

 * @addr: the address to set
@@ -1043,7 +1043,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, 
 * This happens everytime the iv16 wraps around (every 65536 packets). The

 * set_key() call will happen only once for each key (unless the AP did

 * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is

 * provided by udpate_tkip_key only. The trigger that makes mac80211 call this

 * provided by update_tkip_key only. The trigger that makes mac80211 call this

 * handler is software decryption with wrap around of iv16.

 */
@@ -1177,7 +1177,7 @@ enum ieee80211_ampdu_mlme_action { 
 *	Must be implemented.

 *

 * @add_interface: Called when a netdevice attached to the hardware is

 *	enabled. Because it is not called for monitor mode devices, @open

 *	enabled. Because it is not called for monitor mode devices, @start

 *	and @stop must be implemented.

 *	The driver should perform any initialization it needs before

 *	the device can be enabled. The initial configuration for the
@@ -1244,7 +1244,7 @@ enum ieee80211_ampdu_mlme_action { 
 *	the stack will not do fragmentation.

 *

 * @sta_notify: Notifies low level driver about addition or removal

 *	of assocaited station or AP.

 *	of associated station or AP.

 *

 * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),

 *	bursting) for a hardware TX queue.
@@ -1544,7 +1544,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, 
 * the next beacon frame from the 802.11 code. The low-level is responsible

 * for calling this function before beacon data is needed (e.g., based on

 * hardware interrupt). Returned skb is used only once and low-level driver

 * is responsible of freeing it.

 * is responsible for freeing it.

 */

struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,

				     struct ieee80211_vif *vif);